shabon Posted February 27, 2009 Share Posted February 27, 2009 Hi all, I just got some Verbatim discs but still can not burn anything. I keep getting I/O errors and now it says my file have no layer breaks (which is a new error). So here is the log from my latest attempt and burning. Also, I should add my writer still can burn DVD+R (I just burned one) Thanks in advance. I 20:51:42 ImgBurn Version 2.4.2.0 started! I 20:51:42 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 20:51:42 Total Physical Memory: 2,095,500 KB - Available: 1,514,616 KB W 20:51:42 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 20:51:42 Initialising SPTI... I 20:51:42 Searching for SCSI / ATAPI devices... I 20:51:42 Found 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted February 27, 2009 Share Posted February 27, 2009 Hi and welcome to the forum, shabon! The first issue with the missing layer break http://forum.imgburn.com/index.php?showtopic=6376 There is also a later firmware for that writer http://www.firmwarehq.com/HP/dvd740b/files.html The lowest speed you can burn those discs with that writer is 4x. (Speeds: 4x, 6x, 8x) The issue might still be that your writer is to old for this new media. Verbatim 2.4x rated discs might work better. Link to comment Share on other sites More sharing options...
shabon Posted February 27, 2009 Author Share Posted February 27, 2009 Thanks for the updates, So I tried updating the firmware and it was successful, then I tried to burn the image again and here is what it said: I 22:08:06 ImgBurn Version 2.4.2.0 started! I 22:08:06 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 22:08:06 Total Physical Memory: 2,095,500 KB - Available: 1,530,392 KB W 22:08:06 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 22:08:07 Initialising SPTI... I 22:08:07 Searching for SCSI / ATAPI devices... I 22:08:26 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2009 Share Posted February 27, 2009 I 22:09:31 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)I 22:09:31 Write Speed: 4x Have you tried 6x and 8x? Link to comment Share on other sites More sharing options...
shabon Posted February 27, 2009 Author Share Posted February 27, 2009 Yes I've tried 1x 2x 2.4x 4x 6x and 8x, and I still get the same result. I'm going to pick up some older Verbatim 2.4x and see how that goes. If anyone has anymore suggestions please let me have them. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts