topcattroy Posted February 27, 2009 Share Posted February 27, 2009 Hello all , new to this forum.. I've used image burn for every 360 game. When i downloaded some games the file system comes up, udf or iso9660. Whenever i burned the file it comes up media files and cant boot them. Ive tried slower speeds. different disk brands. All with the same effect. So i must be doing something wrong. My flashed 360 is a ntsc format. How do i change the file system to the format so my 360 will read it. Any help would be great. thanks in advance topcattroy Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2009 Share Posted February 27, 2009 Where's the log showing a burn + verify on Verbatim media? By the way the xbox360 doesn't use those filesystem so you don't need to worry about them. Link to comment Share on other sites More sharing options...
topcattroy Posted February 27, 2009 Author Share Posted February 27, 2009 it says it burnt it ok. When i put it in the 360 it comes up mixed media. The games im trying to write are said to be region free. but everygame ive tried thats region free dosen't work. The files say that they are iso9660 udf. I think this is were my problems at. Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2009 Share Posted February 27, 2009 Did you leave Verify enabled? Did it pass the Verify stage? Without the log it's hard to help you. Look in Help menu -> ImgBurn Logs. Link to comment Share on other sites More sharing options...
topcattroy Posted February 27, 2009 Author Share Posted February 27, 2009 I 14:43:21 ImgBurn Version 2.4.2.0 started! I 14:43:21 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 14:43:21 Total Physical Memory: 3,142,924 KB - Available: 2,091,964 KB W 14:43:21 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 14:43:21 Drive J:\ (FAT32) does not support single files > 4 GB in size. I 14:43:21 Initialising SPTI... I 14:43:21 Searching for SCSI / ATAPI devices... I 14:43:21 Found 1 DVD ImgBurn.log Link to comment Share on other sites More sharing options...
topcattroy Posted February 27, 2009 Author Share Posted February 27, 2009 as you can see from above, it says completed. yet it comes up can't read this disk. Link to comment Share on other sites More sharing options...
mmalves Posted February 27, 2009 Share Posted February 27, 2009 I 14:44:30 Destination Device: [1:2:0] HL-DT-ST DVDRAM GH20NS10 EL00 (F:) (RAID) There's firmware EL01 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished updating. You should select the .dvd file as the image to burn. If there isn't one, create an MDS file (look in the Tools menu) for your ISO image with the layerbreak at 1913760. Link to comment Share on other sites More sharing options...
topcattroy Posted February 28, 2009 Author Share Posted February 28, 2009 frik , thanks but it did not work. comes up mixed media I 20:17:46 Operation Started! I 20:17:46 Source File: C:\Users\Troy\Documents\rumble.mds I 20:17:46 Source File Sectors: 3,826,208 (MODE1/2048) I 20:17:46 Source File Size: 7,836,073,984 bytes I 20:17:46 Source File Volume Identifier: rapala fish I 20:17:46 Source File Volume Set Identifier: 3A5BA0FA003A620A I 20:17:46 Source File Application Identifier: ImgBurn v2.4.2.0 I 20:17:46 Source File Implementation Identifier: ImgBurn I 20:17:46 Source File File System(s): UDF (1.02) I 20:17:46 Destination Device: [1:2:0] HL-DT-ST DVDRAM GH20NS10 EL01 (F:) (RAID) I 20:17:46 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 20:17:46 Destination Media Sectors: 4,173,824 I 20:17:46 Write Mode: DVD I 20:17:46 Write Type: DAO I 20:17:46 Write Speed: 4x I 20:17:46 Link Size: Auto I 20:17:46 Test Mode: No I 20:17:46 OPC: No I 20:17:46 BURN-Proof: Enabled I 20:17:47 Book Type Setting: DVD-ROM I 20:17:47 Optimal L0 Data Zone Capacity: 1,913,104 I 20:17:47 Optimal L0 Data Zone Method: Copied From Original Disc I 20:18:21 Filling Buffer... (40 MB) I 20:18:22 Writing LeadIn... I 20:18:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3826207) I 20:18:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3826207) I 20:18:25 Writing Layer 0... (LBA: 0 - 1913103) I 20:30:11 Writing Layer 1... (LBA: 1913104 - 3826207) I 20:42:00 Synchronising Cache... I 20:42:02 Closing Track... I 20:42:05 Finalising Disc... I 20:42:54 Exporting Graph Data... I 20:42:54 Graph Data File: C:\Users\Troy\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH20NS10_EL01_FRIDAY-FEBRUARY-27-2009_8-17_PM_MKM-001-00_4x.ibg I 20:42:54 Export Successfully Completed! I 20:42:54 Operation Successfully Completed! - Duration: 00:25:02 I 20:42:54 Average Write Rate: 5,408 KB/s (3.9x) - Maximum Write Rate: 5,574 KB/s (4.0x) not sure what to do now Link to comment Share on other sites More sharing options...
mmalves Posted February 28, 2009 Share Posted February 28, 2009 I 20:17:47 Optimal L0 Data Zone Capacity: 1,913,104I 20:17:47 Optimal L0 Data Zone Method: Copied From Original Disc The layerbreak is wrong: it should be 1913760. If you prefer set the layerbreak to 1913760 in Tools menu -> Settings -> Write tab. Just remember to put it back to Calculate Optimal before burning any other dual-layer discs than x360 games Link to comment Share on other sites More sharing options...
topcattroy Posted February 28, 2009 Author Share Posted February 28, 2009 i thought i did set it to 1913760 ill try again thanks for the speedy post Link to comment Share on other sites More sharing options...
topcattroy Posted February 28, 2009 Author Share Posted February 28, 2009 ok does this mean i have to layer break it at that number always for any game file. getting ready to burn now again thanks for all the help Link to comment Share on other sites More sharing options...
topcattroy Posted February 28, 2009 Author Share Posted February 28, 2009 i usually use image burn and never had to do this if i ripped from disc. I use xbc and it always worked. Is this a different type of rip. (region free) because i have never been able to burn them succefully and should i use this number for every file thats region free, or does that number change per file. Not sure how you came up with that number 1917360 Link to comment Share on other sites More sharing options...
mmalves Posted February 28, 2009 Share Posted February 28, 2009 I'm sorry but we can only help you with ImgBurn and the burning process in general Link to comment Share on other sites More sharing options...
topcattroy Posted February 28, 2009 Author Share Posted February 28, 2009 sorry about that, but SUCCESS,SUCCESS,SUCCESS yes thanks you , you rock. I 20:58:01 ImgBurn Version 2.4.2.0 started! I 20:58:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 20:58:01 Total Physical Memory: 3,142,924 KB - Available: 2,155,940 KB W 20:58:01 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 20:58:01 Drive J:\ (FAT32) does not support single files > 4 GB in size. I 20:58:01 Initialising SPTI... I 20:58:01 Searching for SCSI / ATAPI devices... I 20:58:01 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted February 28, 2009 Share Posted February 28, 2009 Link to comment Share on other sites More sharing options...
Recommended Posts