Tassadar Posted March 3, 2009 Posted March 3, 2009 Hello folks, i've tried to burn (and simulate) a dvd image from the lastest img burn with my Samsung sh-223 attached on the mainboard controller (nvidia 8300 chipset) in RAID mode and the burn fails, it just hangs up just after the "creating thread graph" message. It also make the drive not responding anymore (i've to reboot my system). Trying with nero 7 instead the simulation has gone smoothly. If you need some logs or something i'll glad to feed them
LIGHTNING UK! Posted March 3, 2009 Posted March 3, 2009 When you say 'just after the "creating thread graph" message', what exactly is displayed in the status bar when it you're saying it's hung? A copy of whatever's in the log window at the time would of course be useful too.
Tassadar Posted March 3, 2009 Author Posted March 3, 2009 (edited) When you say 'just after the "creating thread graph" message', what exactly is displayed in the status bar when it you're saying it's hung? A copy of whatever's in the log window at the time would of course be useful too. Hello Lightning, how are you? I tried to simulate again and here is what exactly happened: 1) the status bar reporting: "creating thread data graph" 2) writing lead in... and at the same time an error message appeared 3) after these messages any interaction with the drive is impossible, even from any other programs, with windows and even the eject button doesn't work, the only option to use again the drive is to reboot the system. The error message is: Scsi status 0x02 Interpretation check condition CDB 2A 00 00 00 01 40 00 00 20 00 Interpretation: write(10) - Sectors: 320 - 351 Sense area: F0 02 00 00 00 00 00 0B A8 4D FB 88 00 00 00 00 00 00 00 00 01 00 00 C4 Interpretaion: No additional sense information Here is the log: ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; marted Edited March 3, 2009 by Tassadar
Tassadar Posted March 3, 2009 Author Posted March 3, 2009 what on earth are you using raid mode for? Beacuse i'm going to create a raid array between two of my three hard disc and when you switch to RAID mode the motherboard avoid to use any other modes for all the SATA ports.
cornholio7 Posted March 3, 2009 Posted March 3, 2009 you only need raid enabled for the 2 hdd you want in raid
Tassadar Posted March 3, 2009 Author Posted March 3, 2009 yes but i can't do this, once RAID mode is set all the sata ports work in RAID mode and there's no way to switch some of them in IDE mode
mmalves Posted March 3, 2009 Posted March 3, 2009 Try with the ASPI interface (Tools -> Settings -> I/O tab). Use Ner0 ASPI (available from ImgBurn's Download page) if you don't have ASPI already.
Tassadar Posted March 4, 2009 Author Posted March 4, 2009 Try with the ASPI interface (Tools -> Settings -> I/O tab). Use Ner0 ASPI (available from ImgBurn's Download page) if you don't have ASPI already. I did it, this time all the system freezed!
mmalves Posted March 4, 2009 Posted March 4, 2009 Still with ASPI interface, if you change the Write Type from DAO/SAO to Incremental (Write tab in ImgBurn's settings), does it work? Also, out of my own curiosity, can Samsung's WININQUIRY utility correctly report all the information about your burner?
Tassadar Posted March 8, 2009 Author Posted March 8, 2009 The inquiry tool worked great, i've flashed the drive too!
Tassadar Posted March 8, 2009 Author Posted March 8, 2009 Still with ASPI interface, if you change the Write Type from DAO/SAO to Incremental (Write tab in ImgBurn's settings), does it work?Samsung's WININQUIRY utility correctly report all the information about your burner? Incremental feature didn't work, anyway the error this time is different. It happened still just after the "creating thread data" message but this time is a "session fixation error" and the system didn't freezed and the writer is still working, so no reboot is required
Tassadar Posted March 8, 2009 Author Posted March 8, 2009 Still with ASPI interface, if you change the Write Type from DAO/SAO to Incremental (Write tab in ImgBurn's settings), does it work?Samsung's WININQUIRY utility correctly report all the information about your burner? Incremental feature didn't work, anyway the error this time is different. It happened still just after the "creating thread data" message but this time is a "session fixation error" and the system didn't freezed and the writer is still working, so no reboot is required i figured out that i wasn't using the correct ASPI driver, anyway i put the nero's dll in \windows\system. Someone could help me to install the driver? Using search i found there's a lot of problem with nvidia driver.... maybe is this the cause?
LIGHTNING UK! Posted March 8, 2009 Posted March 8, 2009 The wnaspi32.dll just needs to be in the ImgBurn program folder. You shouldn't make it system wide really.
Tassadar Posted March 8, 2009 Author Posted March 8, 2009 Ok i did it!!! Simulation with nero aspi and incremental feature worked!!!! It also worked in DAO mode! So nvidia is the cause of my problem?!
LIGHTNING UK! Posted March 8, 2009 Posted March 8, 2009 nvidia drivers are the cause of most problems Leave the write type on DAO rather than incremental.
Tassadar Posted March 8, 2009 Author Posted March 8, 2009 Thanks all for support, if this could useful for you you have to know that in IDE mode with the same drivers the burn process with the SPTI works.... it's seems that something happens only in RAID mode
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now