Jump to content

Recommended Posts

Posted (edited)

i burned with slow speed, fast speed. tried all of them. did not work. i used a verbatim dvd-r 4.7gb.

the thing bugs me that i used a sony dvd-r and that worked for me. so its not the lens.

i use a HL-DT-ST DVDRAM GSA-T40N JR03

any suggestions?

 

 

I 05:27:25 ImgBurn Version 2.4.2.0 started!

I 05:27:25 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 05:27:25 Total Physical Memory: 3.144.172 KB - Available: 1.859.236 KB

I 05:27:25 Initialising SPTI...

I 05:27:25 Searching for SCSI / ATAPI devices...

I 05:27:25 Found 1 DVD

Edited by konstantstate
Posted

you only have 2 supported speeds, if you have tried at 4x and 8x then look for a firmware update for your drive as these discs will burn to at least 18x

Posted
I 05:29:33 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T40N JR03 (E:) (ATA)

I 05:29:33 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x; 8x)

I 05:29:33 Destination Media Sectors: 2.294.912

That disc was damaged in a previous failed burn. Try with a brand new blank and it should work.

Posted

well i tried 4 different dvds its, i mean new ones. i just tried at my neigbours place and it worked.

my firmware is up to date.

 

wel this are my last log with 4 differnt discs

 

I 06:22:58 ImgBurn Version 2.4.2.0 started!

I 06:22:58 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 06:22:58 Total Physical Memory: 3.144.172 KB - Available: 1.937.836 KB

I 06:22:58 Initialising SPTI...

I 06:22:58 Searching for SCSI / ATAPI devices...

I 06:23:18 Found 1 DVD

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.