sidion Posted March 6, 2009 Posted March 6, 2009 Hi I'm new and just started using IMGBURN. I previously used dvddecrypter for most of my burning needs or Nero. This is the first time I've tried using IMGBURN and I used both a Verbatim and a TDK both of which have been burned on a Samsung and played in a benq modded box previously. It always errors out at 34% it seems and I was wondering whether it's the backup or what? Here is the log (using a TDK this time since I wasted a Verbatim and received the same error, also I noticed Ritek with these DL's but the verbatim didn't show Ritek): I 16:10:54 ImgBurn Version 2.4.2.0 started! I 16:10:54 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 16:10:54 Total Physical Memory: 3,406,140 KB - Available: 2,182,244 KB I 16:10:54 Initialising SPTI... I 16:10:54 Searching for SCSI / ATAPI devices... I 16:10:55 Found 1 DVD
mmalves Posted March 6, 2009 Posted March 6, 2009 I 16:12:47 Destination Device: [0:0:0] PIONEER DVD-RW DVR-116D 1.08 (D:) (ATA)I 16:12:47 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x) I 16:12:47 Write Speed: 2.4x There's firmware 1.09 available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished. You might also want to try the other available burn speeds. If all that doesn't help then please read this: http://forum.imgburn.com/index.php?showtopic=8000
Recommended Posts