Kunio616 Posted March 6, 2009 Share Posted March 6, 2009 (edited) Burning an iso [sister's dance recital on cam corder, saved as iso, now burning to dvd] Log: I 22:24:20 ImgBurn Version 2.4.1.0 started! I 22:24:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 22:24:20 Total Physical Memory: 2,095,480 KB - Available: 707,240 KB I 22:24:20 Initialising SPTI... I 22:24:20 Searching for SCSI / ATAPI devices... I 22:24:20 Found 1 DVD-ROM and 1 DVD Edited March 6, 2009 by Kunio616 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 6, 2009 Share Posted March 6, 2009 Why would you stick to using a version that's known to be buggy?! 2.4.2.0 exists for a reason. If this problem isn't just a one off, try burning at the other available speeds. I 22:41:13 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x) If none of them work, try some better media - Taiyo Yuden or Verbatim. If they don't work, try a cleaning disc on the drive. If it still doesn't work then, get yourself a new drive. Link to comment Share on other sites More sharing options...
Kunio616 Posted March 7, 2009 Author Share Posted March 7, 2009 Just re-did the burn and worked with the new version but I also tried 4x. Should I try 8x again whenever I go to burn something new or keep 4x? Link to comment Share on other sites More sharing options...
Cynthia Posted March 7, 2009 Share Posted March 7, 2009 If you get errors on 8x and 4x works - use the ones that works with those discs. Link to comment Share on other sites More sharing options...
Kunio616 Posted March 7, 2009 Author Share Posted March 7, 2009 No, 8x worked, or it did before. I only tried 4x because that might of been it but I doubt it if the author says the version I was using was so buggy. Link to comment Share on other sites More sharing options...
Cynthia Posted March 7, 2009 Share Posted March 7, 2009 W 22:31:16 Waiting for buffers to recover... Do you always get these warnings in the logs? Link to comment Share on other sites More sharing options...
Kunio616 Posted March 7, 2009 Author Share Posted March 7, 2009 I don't think so, but then again, I barely pay attention to the logs since it usually works 99.9% of the time ...why?? Link to comment Share on other sites More sharing options...
Cynthia Posted March 7, 2009 Share Posted March 7, 2009 It could have an impact on the failed burned. Link to comment Share on other sites More sharing options...
Recommended Posts