Won't burn DL

[Steve100]

s Iam new..

I used DVD Ghost to copy the dvd files to the suggested folder.

I run imgburn and select the right mode to copy the files to a +R

DL disk, go through the excellent how to and it comes to the last

bit I press OK and it comes up with a message saying something

about LO zone and it dosn't burn, ideas please

 

Steve

[LIGHTNING UK!]

Post a copy of the log please.

 

We need actual details rather than just what you can remember.

[Steve100]

Post a copy of the log please.

 

We need actual details rather than just what you can remember.

 

 

will do, bear with me Thanks

[Steve100]

here is the log file

 

I 23:30:20 ImgBurn Version 2.4.2.0 started!

I 23:30:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 23:30:20 Total Physical Memory: 1,046,512 KB - Available: 593,684 KB

I 23:30:20 Initialising SPTI...

I 23:30:20 Searching for SCSI / ATAPI devices...

I 23:30:20 Found 1 DVD

[Cynthia]

I 23:31:19 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

That media is not supported by the firmware (writer).

 

There is a 2.17 version of the firmware. It might support that media.

 

http://liggydee.cdfreaks.com/page/en/NEC-ND-3500A/

 

If you still get problems, you either need to get another brand of media or a new burner.

[LIGHTNING UK!]

Surely 2.1B is newer?

 

http://www.firmwarehq.com/NEC/ND-3500/files.html

[Cynthia]

True.

[Steve100]

True.

 

 

Thanks for info. I re flashed the drive with 2.1B and it seems to have

cured the problem. The make of media seems very critical as a Fuji

+r DL burnt and verified fine and works in my dvd player, another

cheaper disk burnt ok but failed being verified, so lesson learnt is

use decent disks :-)

One other thing is when I play it on my PC it shows down the right

side of the screen the chapters but it also shows 3 titles, what am

I doing wrong

 

Thanks