Jump to content

Recommended Posts

Posted

Okay kind of long but I've had this same problem for a long time now. The only fix so far is to do a complete clean install of Vista and my problems go away for around 6 months. All the while I have upgraded mb, cpu, and ram but the problem still creeps up. After about 6 months of everything working great I will start getting crc errors in my encodes using CCE. At the same time these crc errors start popping up I get the Miscompare at LBA errors during the verify process. When I first started getting these errors I did all the normal things like run memtest, chk the hdds, perform defrags, uninstall anydvd, anything I could do. This time when it started I just got back from a week vacation and nothing was changed on my pc. The day I left I did a encode and a burn just fine. I get back and right away while CCE is doing an encode I get the crc error. After I managed to get through an entire encode without a crc error I goto burn and all goes well till it does the verify. Strange thing is the Miscompare at LBA's happen in different spots if I reverify the burn. Below is a paste from the log:

 

I 17:26:07 ImgBurn Version 2.4.2.0 started!

I 17:26:07 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 17:26:07 Total Physical Memory: 6,289,780 KB - Available: 4,477,584 KB

W 17:26:07 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 17:26:07 Initialising SPTI...

I 17:26:07 Searching for SCSI / ATAPI devices...

I 17:26:08 Found 1 DVD

Posted

Well I did Discovery Burns and not a single problem. Below is the log from that burn:

 

18:43:35 ImgBurn Version 2.4.2.0 started!

I 18:43:35 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 18:43:35 Total Physical Memory: 6,289,780 KB - Available: 3,705,704 KB

W 18:43:35 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 18:43:35 Initialising SPTI...

I 18:43:35 Searching for SCSI / ATAPI devices...

I 18:43:36 Found 1 DVD

Posted

Well since I had similar problems in the past I figured it was something software related causing my problems. In the past (with my old setup) I ran test after test and nothing failed. Anyhow I decided what the heck and ran memtest+ and was planning on running it all night long. I started with the new 3.5 version of memtest and it would only get to 7% on the first test and completely crash and lock up the program. I then tried 3.4a and bam, with in 5 seconds I had like over 100 errors. I was like dang. I started taking sticks out to determine which stick was faulty. I narrowed it down to the faulty stick and have a rma process started through Crucial.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.