crazysxycool Posted March 13, 2009 Posted March 13, 2009 Hello everyone. I'm new to this forum and DVD Flick but not new to burning dvds/cds. I have attached screen shots so you can see what my problem is. I'm using my HP Pavilion dv2040us laptop to burn an avi file. I have Verbatim DVD+R as my media type. I have tried twice and get the same error. I tested some smaller files to burn on a CD-R and the burn went fine. So I'm at a loss of what's causing this. Can anyone help? If you need more information I'll be happy to provide it. O/S is WinXP Home (fully updated) - 2 gb of ram - 320 hard drive - DVD drive is a Matshita DVD-RAM UJ-850S Thanks in advance. Wyman
Cynthia Posted March 13, 2009 Posted March 13, 2009 Hi and welcome to the forum, crazysxycool! In the folder you select as target for your project - there should be a file named imgburn_write.txt Can you post it?
crazysxycool Posted March 13, 2009 Author Posted March 13, 2009 Hi and welcome to the forum, crazysxycool! In the folder you select as target for your project - there should be a file named imgburn_write.txt Can you post it? Hi Cynthia - Thanks for the welcome. Thanks for replying. I have attached the file per your request. Wyman imgburn_write.txt
Cynthia Posted March 13, 2009 Posted March 13, 2009 I 03:05:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2184255)W 03:06:35 Failed to Write Sectors 135872 - 135903 - Reason: Internal Target Failure I 09:07:22 Average Write Rate: 12 KB/s (0.0x) - Maximum Write Rate: 3,411 KB/s (2.5x) I 03:04:52 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x)I 03:04:52 Destination Media Sectors: 2,295,104 I 03:04:52 Write Mode: DVD I 03:04:52 Write Type: DAO I 03:04:52 Write Speed: 4x The speed when the failure happens early in the writing might be that it is just 2.5x, even if I think it should have catched up faster speed at that time. You could see if DMA is still enabled as described in the FAQ. http://forum.imgburn.com/index.php?s=&...dpost&p=967 Try also 6x or 8x speed. If that doesn't help. It might be that the burner is on it's way to dye. You could try to use a cleaning disc.
crazysxycool Posted March 13, 2009 Author Posted March 13, 2009 I 03:05:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2184255)W 03:06:35 Failed to Write Sectors 135872 - 135903 - Reason: Internal Target Failure I 09:07:22 Average Write Rate: 12 KB/s (0.0x) - Maximum Write Rate: 3,411 KB/s (2.5x) I 03:04:52 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x)I 03:04:52 Destination Media Sectors: 2,295,104 I 03:04:52 Write Mode: DVD I 03:04:52 Write Type: DAO I 03:04:52 Write Speed: 4x The speed when the failure happens early in the writing might be that it is just 2.5x, even if I think it should have catched up faster speed at that time. You could see if DMA is still enabled as described in the FAQ. http://forum.imgburn.com/index.php?s=&...dpost&p=967 Try also 6x or 8x speed. If that doesn't help. It might be that the burner is on it's way to dye. You could try to use a cleaning disc. Hi again Cynthia, I have attached a screen shot that show DMA is enabled. Also, how can I select 6x or 8x if ImgBurn automatically opens after DVD Flick finishes the encoding? I don't think it gives me an option. Thanks, Wyman
Cynthia Posted March 13, 2009 Posted March 13, 2009 You can change the write speed in DVD Flick this way: Project settings -> Burning -> Speed
spinningwheel Posted March 13, 2009 Posted March 13, 2009 Windows will incorrectly report the mode because there is a bug in their programming that they are aware of and haven't yet fixed. If you're still burning slow, follow the directions in the FAQ and delete the controllers and let Windows reinstall them on the next boot up to get back to the highest DMA from PIO.
crazysxycool Posted March 13, 2009 Author Posted March 13, 2009 I uninstalled the Controller and rebooted before posting that last pic. Is that the correct mode?
Recommended Posts