zaccinson88 Posted March 14, 2009 Posted March 14, 2009 hi, basically my buffer and device buffer wont move from 0% which is stopping me from burning. on occassions they work and so far i have managed to burn 2 games. my first time using it worked a charm but now i only inccur problems. here is my last failed log can someone plz tell me what went wwrong this had been left for 15mins before i closed it down thank you ImgBurn Version 2.4.2.0 - Log ; Saturday, 14 March 2009, 11:17:14 ; \\****************************************// ; ; I 11:17:12 ImgBurn Version 2.4.2.0 started! I 11:17:12 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 11:17:12 Total Physical Memory: 2,095,956 KB - Available: 1,305,516 KB I 11:17:12 Initialising SPTI... I 11:17:12 Searching for SCSI / ATAPI devices... I 11:17:13 Close Request Acknowledged I 11:17:13 Closing Down... E 11:17:14 CreateFile Failed! - Device: '\\.\CdRom0' (D:) E 11:17:14 Reason: Access is denied. W 11:17:14 Errors were encountered when trying to access a drive. W 11:17:14 This drive will not be visible in the program. E 11:17:14 You need Administrative privileges to use SPTI. W 11:17:14 No devices detected! I 11:17:14 Shutting down SPTI... I 11:17:14 ImgBurn closed! ;
LIGHTNING UK! Posted March 14, 2009 Posted March 14, 2009 That log shows you leaving it 2 seconds. Try and post a different log with more info.
zaccinson88 Posted March 14, 2009 Author Posted March 14, 2009 That log shows you leaving it 2 seconds. Try and post a different log with more info. here you go m8 //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Saturday, 14 March 2009, 11:36:57 ; \\****************************************// ; ; I 11:25:12 ImgBurn Version 2.4.2.0 started! I 11:25:12 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 11:25:12 Total Physical Memory: 2,095,956 KB - Available: 1,254,120 KB I 11:25:12 Initialising SPTI... I 11:25:12 Searching for SCSI / ATAPI devices... I 11:25:12 Found 1 DVD
Cynthia Posted March 14, 2009 Posted March 14, 2009 Based on the log you posted last - can you then select your writer and run the task you want? If I read the log I see that the program is started and then manually shut down after 11 min.
LIGHTNING UK! Posted March 14, 2009 Posted March 14, 2009 lol you need to actually be doing something! - i.e. burning + verifying a disc.
zaccinson88 Posted March 14, 2009 Author Posted March 14, 2009 (edited) i did i chose to write star wars to disk then it goes to write it but the buffers remain at 0% i left it for some time then came back and it was the same i selcted star wars and my dvd drive then it just does nothing the buffers stay at 0% and it doesnt write i did the exact same as i did with my previous files lie street fighter 4 and halo wars but it just doesnt write. i am still using the same disks aswell the only reason i shut it down is because it doesnt do anything at all so after like 10 mins i stop it do you think i should just buy new media?? here is another log if it helps ImgBurn Version 2.4.2.0 - Log ; Saturday, 14 March 2009, 12:29:21 ; \\****************************************// ; ; I 12:19:21 ImgBurn Version 2.4.2.0 started! I 12:19:21 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:19:21 Total Physical Memory: 2,095,956 KB - Available: 1,193,776 KB I 12:19:21 Initialising SPTI... I 12:19:21 Searching for SCSI / ATAPI devices... I 12:19:21 Found 1 DVD Edited March 14, 2009 by zaccinson88
LIGHTNING UK! Posted March 14, 2009 Posted March 14, 2009 Seriously, the logs you've posted have no info about any 'operation' starting or ending... and they ALWAYS do. Look for yourself next time. Open ImgBurn and make sure the log window is open ('View' menu -> 'Log'), then start to burn a disc. There's a lot more that'll be visible in the window in addition to what you've posted. EDIT: Ok the log you just posted (via an 'Edit') above does have the info required. We got there in the end It you look in the status bar it'll no doubt show what the program is doing. It's probably waiting for the drive to set the layer break position - but your drive doesn't like that media so it's having problems. Read this: http://forum.imgburn.com/index.php?showtopic=8000
zaccinson88 Posted March 14, 2009 Author Posted March 14, 2009 sorry for the hassle i dont realy know what im doing half the time cheers for the help im going to buy them disks today
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now