lyih Posted March 15, 2009 Share Posted March 15, 2009 (edited) hello guys i have a problem here... in the past few months i have no problem burning my dual layer disk but until today this error occur any expert can help me? thanks in advance I 22:37:01 ImgBurn Version 2.4.2.0 started! I 22:37:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 22:37:01 Total Physical Memory: 3,406,252 KB - Available: 2,475,140 KB I 22:37:01 Initialising SPTI... I 22:37:01 Searching for SCSI / ATAPI devices... I 22:37:01 Found 1 DVD-ROM and 1 DVD Edited March 16, 2009 by lyih Link to comment Share on other sites More sharing options...
Cynthia Posted March 15, 2009 Share Posted March 15, 2009 Hi and welcome to the forum, lyih! Sounds as the burn was not very good. Did you verify that disc when you burned it? There is a later firmware for that burner. http://www.firmwarehq.com/Asus/DRW-2014L1T/files.html Link to comment Share on other sites More sharing options...
lyih Posted March 15, 2009 Author Share Posted March 15, 2009 yes. the problem turns up during verification thats something wierd because the file is 7.8 gb but when i check the dual layer disk which i burn the iso file to. its only 5.2 gb i have wasted 7 dual layer disk now...zzz i dun think is the firm ware problem because for few month i have been burning with this dvd room any way thanks for your help... will try to update the firm ware. any other suggestion? Link to comment Share on other sites More sharing options...
Cynthia Posted March 15, 2009 Share Posted March 15, 2009 7,835,492,352 bytes = 7.3 gigabytes Can you post a log from one of those burnings? Link to comment Share on other sites More sharing options...
lyih Posted March 16, 2009 Author Share Posted March 16, 2009 this is the log from burning. any one can help? I 19:51:28 ImgBurn Version 2.4.2.0 started! I 19:51:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 19:51:28 Total Physical Memory: 3,406,252 KB - Available: 2,402,288 KB I 19:51:28 Initialising SPTI... I 19:51:28 Searching for SCSI / ATAPI devices... I 19:51:47 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted March 16, 2009 Share Posted March 16, 2009 I 19:52:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)I 19:52:42 Write Speed: 2x Try burning at 6x or 8x to see if it works. If it doesn't, please read this: http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
lyih Posted March 16, 2009 Author Share Posted March 16, 2009 (edited) the same thing occur when i burn with 4x and 6 x Edited March 16, 2009 by lyih Link to comment Share on other sites More sharing options...
Recommended Posts