cabaji Posted March 18, 2009 Posted March 18, 2009 i have an external lg gsa-e60n with crossflashed firmware gsa-h55n, that was a success the current firmware is 1.06 the media im using is matrix dvd dual layer 8x : Disc ID: RICOHJPN-D01-67 the problem is when i want to burn a dvd dual layer it gets me this errors messages: Failed to Write Sectors 0 - 31 - Reason: Write Protected Failed to Write Sectors 0 - 31 - Reason: Unknown (Write Error) (0x0C, 0x80) Failed to set L0 Data Zone Capacity! the first time and second and third time, and it gets a lot of time in WRITING LEADIN, but at the fourth try, THE CRAZY BURNER START BURNING!!!!!!, so far i burned fable 2, and tales of vesperia , FABLE 2 failed the verification process at second layer but it worked in my xbox i recently finished the game. the log post is this(its not complete) ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Jueves, 12 Marzo 2009, 09:35:07 ; \\****************************************// ; ; I 08:33:28 ImgBurn Version 2.4.2.0 started! I 08:33:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 08:33:28 Total Physical Memory: 2.086.956 KB - Available: 1.314.380 KB I 08:33:28 Initialising SPTI... I 08:33:28 Searching for SCSI / ATAPI devices... I 08:33:28 Found 1 DVD-ROM and 2 DVD
mmalves Posted March 18, 2009 Posted March 18, 2009 I 08:36:07 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55N 1.06 (D:) (USB)I 08:36:07 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) It's all down to the disc's dye quality really. If you can't buy Verbatim then try burning the ones you have at 6x and 8x speeds to see if you get a better burn. You might also want to try blanks from other brands as they could be using Ritek dye and you may have better results with them. Don't get discs with CMC MAG dye though, they're pure crap :&
bguguen Posted September 23, 2009 Posted September 23, 2009 Hey cabaji, i sure hope ur still in this forum but i in the situation where i got myself an LG GSA-E60N and would want your instruction as to how to crossflash it...
Recommended Posts