X2D24 Posted March 18, 2009 Posted March 18, 2009 (edited) Thanks for the help in advance.. I have just burnt a dvd using imgBurn and the message says complete but the dvd is empty?? .. But the disk feels real hot as if it has been burned on to here is the log file.. ; //****************************************\\; ImgBurn Version 2.4.2.0 - Log ; onsdag, 18 marts 2009, 18:33:49 ; \\****************************************// ; ; I 18:17:55 ImgBurn Version 2.4.2.0 started! I 18:17:55 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 18:17:55 Total Physical Memory: 458.224 KB - Available: 141.668 KB I 18:17:55 Initialising SPTI... I 18:17:55 Searching for SCSI / ATAPI devices... I 18:17:55 Found 1 DVD Edited March 18, 2009 by X2D24
X2D24 Posted March 18, 2009 Author Posted March 18, 2009 (edited) any help at all would be appreciated.. Edited March 18, 2009 by X2D24
mmalves Posted March 18, 2009 Posted March 18, 2009 I 18:18:44 Source File: C:\Documents and Settings\Hanna\Skrivebord\trial2.isoI 18:18:44 Source File Sectors: 343.680 (MODE1/2048) I 18:18:44 Source File Size: 703.856.640 bytes I 18:18:44 Source File File System(s): None I 18:18:44 Destination Device: [1:0:0] QSI DVD+-RW SDW-082S LX06 (D:) (ATA) I 18:18:44 Destination Media Type: DVD+R (Disc ID: MBIPG101-R05-01) (Speeds: 2,4x; 4x; 6x; 8x) I 18:18:44 Write Speed: MAX I 18:32:55 Average Write Rate: 897 KB/s (0.6x) - Maximum Write Rate: 2.430 KB/s (1.8x) Follow what this post from the FAQ says (removing controllers/etc) and it should go back to normal speeds. You might also want to burn at 4x for a possibly better quality burn. Notice that the image you've burned has no filesystem. It was either incorrectly made or was made for a very specific purpose. If you need more help with this you'll need to tell us what you're trying to do
Recommended Posts