k1c Posted March 21, 2009 Posted March 21, 2009 sorry guys if this has been posted before as just recent started getting this message ( Failed to lock volume for exclusive access.) whats up
mmalves Posted March 21, 2009 Posted March 21, 2009 http://forum.imgburn.com/index.php?showtop...dpost&p=975
k1c Posted March 21, 2009 Author Posted March 21, 2009 http://forum.imgburn.com/index.php?showtop...dpost&p=975 sorry mate lost me
k1c Posted March 21, 2009 Author Posted March 21, 2009 click on the link and follow the instructions thanks done that but can now only burn 1/4 way threw the disk then fails tried different makes off disks still the same
Cynthia Posted March 21, 2009 Posted March 21, 2009 Can you post that failed burning log? Did you find anything in the program about what locked it?
k1c Posted March 21, 2009 Author Posted March 21, 2009 Can you post that failed burning log? Did you find anything in the program about what locked it? yes found some but cant rember what it was will try up load log also post fault on incompatiable Format as that what i seem to be reading from the log whoever be advised to keep to this thread sorry ImgBurn.log_failed.txt_failed.txt
LIGHTNING UK! Posted March 21, 2009 Posted March 21, 2009 Update the firmware on your drive. http://www.firmwarehq.com/Lite-On/SHW-160P6S/files.html
Cynthia Posted March 21, 2009 Posted March 21, 2009 There is a later firmware for that burner. http://www.firmwarehq.com/Lite-On/SHW-160P6S/files.html Edit: I'm not only slow upstairs - now also in the fingers.
LIGHTNING UK! Posted March 21, 2009 Posted March 21, 2009 I tend to have firmwarehq open in a tab all the time now... that search box on the front page gets a lot of use! It probably just gave me the edge over you
Cynthia Posted March 21, 2009 Posted March 21, 2009 W 19:13:02 Failed to Write Sectors 8928 - 8959 - Reason: No Additional Sense InformationI 19:16:53 Average Write Rate: 79 KB/s (0.1x) - Maximum Write Rate: 79 KB/s (0.1x) Even if it's in the early stage of the disc, the speed sounds very low. See if DMA is still enabled. Microsoft Windows XP Media Center Edition seems to have a bad habit of falling into PIO mode compared to XP/Vista. http://forum.imgburn.com/index.php?s=&...dpost&p=967
k1c Posted March 21, 2009 Author Posted March 21, 2009 W 19:13:02 Failed to Write Sectors 8928 - 8959 - Reason: No Additional Sense InformationI 19:16:53 Average Write Rate: 79 KB/s (0.1x) - Maximum Write Rate: 79 KB/s (0.1x) Even if it's in the early stage of the disc, the speed sounds very low. See if DMA is still enabled. Microsoft Windows XP Media Center Edition seems to have a bad habit of falling into PIO mode compared to XP/Vista. http://forum.imgburn.com/index.php?s=&...dpost&p=967 thanks will give that a look download new drives re booted back to origial fault used process explorer again same again note detector app 3464 seems to be stop things try new burn just now ops stop again another disc got to throw away sense area 70 and lots off double 00
LIGHTNING UK! Posted March 21, 2009 Posted March 21, 2009 please post the log rather than trying to remember what was written in it.
k1c Posted March 21, 2009 Author Posted March 21, 2009 please post the log rather than trying to remember what was written in it. ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Saturday, 21 March 2009, 21:30:19 ; \\****************************************// ; ; I 20:40:32 ImgBurn Version 2.4.2.0 started! I 20:40:32 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 20:40:32 Total Physical Memory: 982,380 KB - Available: 343,048 KB I 20:40:32 Initialising SPTI... I 20:40:32 Searching for SCSI / ATAPI devices... I 20:40:32 Found 1 DVD
mmalves Posted March 21, 2009 Posted March 21, 2009 Does your system use a nvidia chipset? You can use SIW to find out (Hardware -> Motherboard).
Recommended Posts