Dubmc91 Posted March 22, 2009 Posted March 22, 2009 Every time i try to burn an .iso, I get the same error message. It says "Failed to set L0 Data Capacity! Reason: No Seek Complete." Here's the log I'm working with... I 22:07:57 ImgBurn Version 2.4.2.0 started! I 22:07:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 22:07:57 Total Physical Memory: 1,039,080 KB - Available: 426,044 KB I 22:07:57 Initialising SPTI... I 22:07:57 Searching for SCSI / ATAPI devices... I 22:07:57 Found 1 CD-ROM and 1 DVD
mmalves Posted March 22, 2009 Posted March 22, 2009 I 22:08:50 Destination Device: [0:0:0] _NEC DVD_RW ND-3500AG 2.98 (D:) (ATA)I 22:08:50 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) There's firmware 2.1B available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished updating. If that doesn't solve your problem please read this: http://forum.imgburn.com/index.php?showtopic=8000
Dubmc91 Posted March 22, 2009 Author Posted March 22, 2009 I tried downloading that update and running it on my computer, it just says Target NEC ND-3500A is not found correctly. Also, I don't think it's a problem with the discs because after numerous failed attempts on my computer, I gave the same disc I was using to my friend at work and the disc worked for him no problem.
Cynthia Posted March 22, 2009 Posted March 22, 2009 I 22:08:50 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) There are no write speeds after the Disc ID so it looks as the media you are using now is not even supported in the current firmware. Try to flash the burner with Binflash + the original bin firmware file that can be found here. http://liggydee.cdfreaks.com/page/en/NEC-ND-3500A/
Cynthia Posted March 22, 2009 Posted March 22, 2009 No disc in the burner and all other programs closed down Download Binflash Win32 GUI that can be found on this page http://binflash.cdfreaks.com/#download Download Original NEC 3500 Firmware 2.1b http://liggydee.cdfreaks.com/disclaimer/en...b_orig.zip.html Start NECWinFlash.exe Press the 'Dump' button to get a backup of your currently installed firmware and save it on the hard disk (not needed but can be nice to have just in case it goes banana) Press the 'Flash' button and load the 21b_orig.bin file If the flash went ok - restart the computer
Dubmc91 Posted March 22, 2009 Author Posted March 22, 2009 Alright that did the trick. It's burning now no problem. Thanks for the help.
Recommended Posts