Little problem with burning

[Reijekt]

Howdy. I searched the web for a solution for my problem but haven't found one yet so I thought I'd make a post. I successfully burned two discs, but after that, nothing works. The I/O error I got is as follows:

Device: [0:0:0] HL-DT-ST DVDRAM GSA-T2oN WC05

ScsiStatus: 0x02
Interpretation: Check Condition

CDB: 2A 00 00 11 03 40 00 00 20 00
Interpretation: Write (10) - Sectors: 1114944 - 1114975

Sense Area: 70 00 04 00 00 00 00 0A 32 34 04 0C 09 01 00 00 00 00 00 00 00 00 00 00
Interpretation: Tracking Servo Failure

 

And the log is this:

I 00:58:29 ImgBurn Version 2.4.2.0 started!

I 00:58:29 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 00:58:29 Total Physical Memory: 3,012,788 KB - Available: 2,234,948 KB

I 00:58:29 Initialising SPTI...

I 00:58:29 Searching for SCSI / ATAPI devices...

I 00:58:29 Found 1 DVD

Edited March 24, 2009 by Reijekt

[LIGHTNING UK!]

The verbatims should be fine.

 

I've never even seen the dye you're using there before now.

[Reijekt]

The verbatims should be fine.

 

I've never even seen the dye you're using there before now.

 

Ok thanks for the info. The discs I used were some JVC's my cousin had lying around.