acooke33 Posted April 3, 2009 Share Posted April 3, 2009 I get the same kind of error but on the last line mine says for Interpretation: Cannot write Medium - Incompatible Format I am assuming it is the dvds I bought...Memorex DVD+R DL. I didn't realize they were so corrupt. I've ordered some Verbatim. But just in case, does the error message above refer to the DVDs? I tried all 10 in a pack and got the same message each time. Right before I got the I/O message I got this message: Set LO Data Zone Capacity Failed! Reason: No Seek Complete What does that mean? My computer is capable of burning double layer dvds...I've done it before with Verbatims. Thanks. Log: I 18:00:53 ImgBurn Version 2.4.3.0 started! I 18:00:53 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 18:00:53 Total Physical Memory: 2,095,196 KB - Available: 1,432,172 KB I 18:00:53 Initialising SPTI... I 18:00:53 Searching for SCSI / ATAPI devices... I 18:00:53 Found 2 DVD-ROMs and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted April 3, 2009 Share Posted April 3, 2009 I 18:05:07 Destination Device: [0:1:0] Optiarc DVD+-RW ND-3570A 104B (E:) (ATA)I 18:05:07 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) Your drive doesn't support the dye used in those discs. Try with Verbatim 2.4x (MKM-001-00 dye) and it should work. You may also want to crossflash your burner to the official 1.12 firmware as that's the latest available. By the way, those Memorex blanks may work on other burners, if you want to try. Link to comment Share on other sites More sharing options...
Recommended Posts