Cynthia Posted April 5, 2009 Posted April 5, 2009 Hi and welcome to the forum, Steven_O! FAT32's 4GB limit. You need to fix your hard disk to NTFS.
mmalves Posted April 5, 2009 Posted April 5, 2009 You would know what Cynthia said if you had not closed the Log window
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 (edited) Thanks guys. Also, I closed the log window because I just assumed it would all be error free. EDIT: I did a search for NTFS fixes, but then I figured you guys would know the best way. Any suggestions? EDIT 2: BTW, I'm saving my files on an external hard drive. Edited April 5, 2009 by Steven_O
Cynthia Posted April 5, 2009 Posted April 5, 2009 W 17:06:12 Drive C:\ (FAT32) does not support single files > 4 GB in size.
Falcon Posted April 5, 2009 Posted April 5, 2009 Thanks guys. Also, I closed the log window because I just assumed it would all be error free. If you think that, then closing your eyes while you drive is also a good idea because you can assume it'll drive itself Also, that folder content doesn't really... uh... it doesn't really look right. Is that a dual layer DVD you're ripping? You know ImgBurn isn't for ripping DVDs, right?
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 Thanks guys. Also, I closed the log window because I just assumed it would all be error free. If you think that, then closing your eyes while you drive is also a good idea because you can assume it'll drive itself Also, that folder content doesn't really... uh... it doesn't really look right. Is that a dual layer DVD you're ripping? You know ImgBurn isn't for ripping DVDs, right? I found ImgBurn on Lifehackers list of best dvd ripping programs, but if you know of a better program I'd love to try it.
Falcon Posted April 5, 2009 Posted April 5, 2009 EDIT: I did a search for NTFS fixes, but then I figured you guys would know the best way. Any suggestions? EDIT 2: BTW, I'm saving my files on an external hard drive. NTFS is the fix, not the problem... FAT32 (which external hard disks tend to come preformatted as, for compatibility with Macs) doesn't support files that are more than 4gb each. So ImgBurn breaks up the .iso data and spreads it across as many files as it needs, and combines them using a .MDS file which you would then use to burn/mount/etc. instead of the ISO. If you're gonna only use that hard drive on a PC (no writing on a Mac, no read/write ancient Win9x/ME PCs), you can "convert" the drive to NTFS using a simple procedure... 1) Start/Run 2) Type "cmd", click OK 3) At the prompt, type "convert J: /fs:ntfs" where "J:" is your external drive letter (as per your screenshot) 4) Sit back, relax, and watch the conversion, when it gets done you'll have a NTFS drive instead of FAT32!
Falcon Posted April 5, 2009 Posted April 5, 2009 (edited) I found ImgBurn on Lifehackers list of best dvd ripping programs, but if you know of a better program I'd love to try it. wat, that makes no sense. Okay, to be fair, ImgBurn can BURN DVDs (note the name! "ImgBurn"), but it can't even decrypt, let alone rip, a DVD. You need to use other software that's capable of ripping. You have AnyDVD installed and active which is the only reason ImgBurn is even allowing you to touch a retail DVD (AnyDVD decrypts on the fly and overlays your CD drive in Windows with a "virtual drive" so programs can re-encode directly from the disc without ripping). I'd suggest Googling around for a good DVD Rebuilder that can take care of your encoding process... then come back and let ImgBurn handle your burning But we don't talk about that stuff here... edit: *shoves 3 256-disc cases of burned DVDs under the bed* Edited April 5, 2009 by Falcon
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 (edited) EDIT: I did a search for NTFS fixes, but then I figured you guys would know the best way. Any suggestions? EDIT 2: BTW, I'm saving my files on an external hard drive. NTFS is the fix, not the problem... FAT32 (which external hard disks tend to come preformatted as, for compatibility with Macs) doesn't support files that are more than 4gb each. So ImgBurn breaks up the .iso data and spreads it across as many files as it needs, and combines them using a .MDS file which you would then use to burn/mount/etc. instead of the ISO. If you're gonna only use that hard drive on a PC (no writing on a Mac, no read/write ancient Win9x/ME PCs), you can "convert" the drive to NTFS using a simple procedure... 1) Start/Run 2) Type "cmd", click OK 3) At the prompt, type "convert J: /fs:ntfs" where "J:" is your external drive letter (as per your screenshot) 4) Sit back, relax, and watch the conversion, when it gets done you'll have a NTFS drive instead of FAT32! Thanks a lot Falcon! This won't delete any files I have on there will it? EDIT: Falcon, could you PM some more info on DVD ripping programs? Edited April 5, 2009 by Steven_O
Cynthia Posted April 5, 2009 Posted April 5, 2009 I found ImgBurn on Lifehackers list of best dvd ripping programs, but if you know of a better program I'd love to try it. ImgBurn was not even in the list... http://lifehacker.com/380702/five-best-dvd-ripping-tools It's in this list 'Five Best CD and DVD Burning Tools'. http://lifehacker.com/5100069/five-best-cd...d-burning-tools
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 I found ImgBurn on Lifehackers list of best dvd ripping programs, but if you know of a better program I'd love to try it. ImgBurn was not even in the list... http://lifehacker.com/380702/five-best-dvd-ripping-tools It's in this list 'Five Best CD and DVD Burning Tools'. http://lifehacker.com/5100069/five-best-cd...d-burning-tools Yeah I just went back and checked to see why it was on the list and realized my mistake. I found it a while ago and today I had some free time to rip some of my collection.
Falcon Posted April 5, 2009 Posted April 5, 2009 Thanks a lot Falcon! This won't delete any files I have on there will it? EDIT: Falcon, could you PM some more info on DVD ripping programs? No, if anything it'll allow you to put more information (metadata, compression, security, encryption) into your existing files. FAT32 is so limited in comparison it's hard to believe people still use it! Far as PMing you with more info, IDK, I don't even want to tread on thin ice as far as getting b& from this forum goes... any mods want to clarify that for me?
LIGHTNING UK! Posted April 5, 2009 Posted April 5, 2009 It's microscopic thin ice every time the term 'ripping' is mentioned.
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 (edited) Thanks a lot Falcon! This won't delete any files I have on there will it? EDIT: Falcon, could you PM some more info on DVD ripping programs? No, if anything it'll allow you to put more information (metadata, compression, security, encryption) into your existing files. FAT32 is so limited in comparison it's hard to believe people still use it! Far as PMing you with more info, IDK, I don't even want to tread on thin ice as far as getting b& from this forum goes... any mods want to clarify that for me? That's fine I just looked at Lifehacker's five best ripping programs and realized I already had the #2 installed on my computer. So I'm guessing I just use HandBrake to do it's thing and then use ImgBurn to do the rest, right? Edited April 5, 2009 by Steven_O
Falcon Posted April 5, 2009 Posted April 5, 2009 (edited) It's microscopic thin ice every time the term 'ripping' is mentioned. Woops! I shall disappear from this thread, then. OP, your "suggestion" is bolded in a reply above... Google it and ask nomore about r(edit:--rruuuhhh...odney!) here! Edited April 5, 2009 by Falcon
LIGHTNING UK! Posted April 5, 2009 Posted April 5, 2009 That wasn't just aimed at you Falcon. The default response to anything ripping related should just be - 'We do not discuss *anything* about that subject on this forum....don't let the door slam on your way out!'
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 EDIT: I did a search for NTFS fixes, but then I figured you guys would know the best way. Any suggestions? EDIT 2: BTW, I'm saving my files on an external hard drive. NTFS is the fix, not the problem... FAT32 (which external hard disks tend to come preformatted as, for compatibility with Macs) doesn't support files that are more than 4gb each. So ImgBurn breaks up the .iso data and spreads it across as many files as it needs, and combines them using a .MDS file which you would then use to burn/mount/etc. instead of the ISO. If you're gonna only use that hard drive on a PC (no writing on a Mac, no read/write ancient Win9x/ME PCs), you can "convert" the drive to NTFS using a simple procedure... 1) Start/Run 2) Type "cmd", click OK 3) At the prompt, type "convert J: /fs:ntfs" where "J:" is your external drive letter (as per your screenshot) 4) Sit back, relax, and watch the conversion, when it gets done you'll have a NTFS drive instead of FAT32! This is what happened when I did what you said. Do you know if i did something wrong?
Falcon Posted April 5, 2009 Posted April 5, 2009 (edited) Ah, yet another reason of a laundry-list of reasons why FAT32 blows. It's so easily corrupted. It's telling you that it found a chunk of dead data laying around and wants you to tell it what to do with it. That usually happens when you accidentally unplug the drive without "safely removing" it shortly after writing something to it. Just run "chkdsk j: /f" (in human words: check disk j: & fix it) and that'll fix it, then run convert again edit: also, doing Alt+PrtScrn will save you the trouble of cropping the screenshot, as it'll take a capture of the topmost window only Edited April 5, 2009 by Falcon
Steven_O Posted April 5, 2009 Author Posted April 5, 2009 Ah, yet another reason of a laundry-list of reasons why FAT32 blows. It's so easily corrupted. It's telling you that it found a chunk of dead data laying around and wants you to tell it what to do with it. That usually happens when you accidentally unplug the drive without "safely removing" it shortly after writing something to it. Just run "chkdsk j: /f" (in human words: check disk j: & fix it) and that'll fix it, then run convert again edit: also, doing Alt+PrtScrn will save you the trouble of cropping the screenshot, as it'll take a capture of the topmost window only Once again, thank you for your help Falcon.
Recommended Posts