juz Posted April 16, 2009 Share Posted April 16, 2009 (edited) i'm using a macbook running windows xp (native through bootcamp) with matshita UJ-857D writer. i'm attempting to burn verbatim dvd+r dl 2.4x discs (singapore manufactured). the first attempt i tried 2.4x and it got all the way to the end then threw up a disc finalisation error, and the verify process then failed on the first track and the resulting disc appears to have no data on it at all. so i tried again at 2.0x and the result is the same... can anybody please advise what else i could try? thankyou I 15:44:03 ImgBurn Version 2.4.4.0 started!I 15:44:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 15:44:03 Total Physical Memory: 2,064,908 KB - Available: 1,481,600 KBW 15:44:03 Drive C:\ (FAT32) does not support single files > 4 GB in size.I 15:44:03 Initialising SPTI...I 15:44:03 Searching for SCSI / ATAPI devices...I 15:44:04 Found 1 DVD-ROM and 1 DVD Edited April 16, 2009 by juz Link to comment Share on other sites More sharing options...
mmalves Posted April 16, 2009 Share Posted April 16, 2009 I 15:49:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x) Try with Verbatim 2.4x (MKM-001-00 dye) Made in Singapore blanks and it should work, as it seems your burner doesn't like the Verbatim 8x blanks you currently have. Link to comment Share on other sites More sharing options...
juz Posted April 16, 2009 Author Share Posted April 16, 2009 ahhhh i actually ordered 2.4x discs and they have sent me 8x ones! i only just realised this now! thanks, i'll see if i can get amazon to swap them... even though i've now made 2 coasters from them Link to comment Share on other sites More sharing options...
juz Posted April 16, 2009 Author Share Posted April 16, 2009 well i checked my amazon order and i did mistakenly order 8x i really thought i selected the 2.4x but i must have made a mistake with having all the products open in different tabs! oops anyway i thought rather than waste Link to comment Share on other sites More sharing options...
mmalves Posted April 16, 2009 Share Posted April 16, 2009 Did you have verify enabled when you burned that disc? Could you post the full log from that burn session? I'm asking these because sometimes that error is reported but the drive was able to use the correct layerbreak from the .dvd file. Link to comment Share on other sites More sharing options...
Recommended Posts