Finalise Disc Failed! - Reason: ID CRC or ECC Error

[juz]

i'm using a macbook running windows xp (native through bootcamp) with matshita UJ-857D writer. i'm attempting to burn verbatim dvd+r dl 2.4x discs (singapore manufactured).

 

the first attempt i tried 2.4x and it got all the way to the end then threw up a disc finalisation error, and the verify process then failed on the first track and the resulting disc appears to have no data on it at all.

 

so i tried again at 2.0x and the result is the same...

can anybody please advise what else i could try? thankyou

 

I 15:44:03 ImgBurn Version 2.4.4.0 started!

I 15:44:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:44:03 Total Physical Memory: 2,064,908 KB - Available: 1,481,600 KB

W 15:44:03 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 15:44:03 Initialising SPTI...

I 15:44:03 Searching for SCSI / ATAPI devices...

I 15:44:04 Found 1 DVD-ROM and 1 DVD

Edited April 16, 2009 by juz

[mmalves]

I 15:49:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x)

Try with Verbatim 2.4x (MKM-001-00 dye) Made in Singapore blanks and it should work, as it seems your burner doesn't like the Verbatim 8x blanks you currently have.

[juz]

ahhhh i actually ordered 2.4x discs and they have sent me 8x ones! i only just realised this now!

 

thanks, i'll see if i can get amazon to swap them... even though i've now made 2 coasters from them

[juz]

well i checked my amazon order and i did mistakenly order 8x i really thought i selected the 2.4x but i must have made a mistake with having all the products open in different tabs! oops

 

anyway i thought rather than waste

[mmalves]

Did you have verify enabled when you burned that disc? Could you post the full log from that burn session? I'm asking these because sometimes that error is reported but the drive was able to use the correct layerbreak from the .dvd file.