Jump to content
doctorman

hp BD E DC6E2SH changing book type

Recommended Posts

I have a HP Envy 17 3200 model with the following BD DVD drive

 

hp BD E DC6E2SH

firmware WH61

 

http://www.firmwarehq.com/search.php?keywords=hp+BD+E+DC6E2SH&chk=238

 

how can I change book type to DVD-ROM?

 

 

when I put in my DVD +R DL I get the following notification notes

 

 

=================================

 

 

hp BD E DC6E2SH WH61 (ATAPI)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Next Writable Address: 0

MID: MBIPG101-R10-65

Supported Write Speeds: 2.4x, 4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

 

Physical Format Information (ADIP - L0):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L1):

Disc ID: MBIPG101-R10-65

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 4173823 (0x003FAFFF)

-> RS: 8,310 KB/s (6x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 4173823 (0x003FAFFF)

-> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x)

 

 

===================

 

I decided to change the DVD+R DL to DVD-ROM under Lite-on since there is no option for HP

and I get ERROR there is no field in CDB.

 

==================================

 

 

Opened up the laptop and found the model number on the device

 

HP

BD Combo Drive

Model : DC-6E2SH (15-T)

 

a quick search on google find Ds-6E2SH model used by Dell that is made by Lite ON technology so I almost certain this is a Lite ON

 

===========================

 

Edit #3

 

found this setting utility

http://club.myce.com/f44/settings-utility-liteon-dvd-writers-v1-2-1-a-241940/#.UIR59sXA81V

 

that shows that my drive is set to change the booktype for everything to DVD-ROM

 

will give it a run now...

Edited by doctorman

Share this post


Link to post
Share on other sites

Ok I started this thread and I am closing it now

I included all the info I could to 1st post for others .. so hope it helps...

 

if you have HP laptop most probably it is under Lite-On technology and the newer laptops automatically change booktype to DVD ROM

Share this post


Link to post
Share on other sites

×

Important Information

By using this site, you agree to our Terms of Use.