Jump to content

DarK HawK

Members
  • Content Count

    34
  • Joined

  • Last visited

Everything posted by DarK HawK

  1. DarK HawK

    Optimum Power Calibration Failed!

    Hey LUK, I've got a question. Can you please explain the process of Optimum Power Calibration, for the sake of knowledge. Thanks.
  2. DarK HawK

    Dead drives.

  3. DarK HawK

    Dead drives.

    Hello guys, I've got some weird problems, I think that these 2 drives are dead. The first drive is a BenQ DW1800, I crossflashed it a while ago to 20A4P 9P57 firmware, and it was working fine until I updated the firmware to 9P57 and tried to burn a disc at 20X speed, after that it's dead. Here is the log from the last attempted burn (I restored the original EPPROM and reverted back to the original firmware): I 23:06:18 Operation Started! I 23:06:18 Building Image Tree... I 23:06:19 Checking Directory Depth... I 23:06:19 Calculating Totals... I 23:06:19 Preparing Image... I 23:06:19 Checking Path Length... I 23:06:19 Contents: 20 Files, 0 Folders I 23:06:19 Size: 4,637,454,336 bytes I 23:06:19 Sectors: 2,264,382 I 23:06:19 Image Size: 4,638,048,256 bytes I 23:06:19 Image Sectors: 2,264,672 I 23:06:19 Operation Successfully Completed! - Duration: 00:00:01 I 23:06:19 Operation Started! I 23:06:19 Source File: -==/\/[bUILD IMAGE]\/\==- I 23:06:19 Source File Sectors: 2,264,672 (MODE1/2048) I 23:06:19 Source File Size: 4,638,048,256 bytes I 23:06:19 Source File Volume Identifier: I 23:06:19 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER! I 23:06:19 Source File Implementation Identifier: ImgBurn I 23:06:19 Source File File System(s): ISO9660, UDF (1.02) I 23:06:19 Destination Device: [6:0:0] BENQ DVD DC DW1800 ZB37 (G:) (SCSI) I 23:06:19 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 6x, 8x, 12x, 16x, 18x) I 23:06:19 Destination Media Sectors: 2,297,888 I 23:06:19 Write Mode: DVD I 23:06:19 Write Type: DAO I 23:06:19 Write Speed: 16x I 23:06:19 Link Size: Auto I 23:06:19 Test Mode: No I 23:06:19 OPC: Yes I 23:06:19 BURN-Proof: Enabled I 23:06:19 Advanced Settings - OverSpeed: No, Solid Burn (K/U): No / Yes, WOPC: No W 23:07:20 Optimum Power Calibration Failed! - Reason: Power Calibration Area Is Full I 23:07:20 Filling Buffer... (128 MB) I 23:07:21 Writing LeadIn... W 23:07:50 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full W 23:07:50 Retrying (1 of 20)... W 23:09:31 Retry Failed - Power Calibration Area Is Full W 23:09:31 Retrying (2 of 20)... W 23:10:03 Retry Failed - Power Calibration Area Is Full W 23:10:03 Retrying (3 of 20)... W 23:10:40 Retry Failed - Power Calibration Area Is Full W 23:10:40 Retrying (4 of 20)... W 23:11:08 Retry Failed - Power Calibration Area Is Full W 23:11:08 Retrying (5 of 20)... I 23:11:13 Abort Request Acknowledged W 23:11:56 Retry Failed - Power Calibration Area Is Full E 23:11:56 Failed to Write Sectors 0 - 31 - Power Calibration Area Is Full I 23:11:56 Synchronising Cache... W 23:12:02 User opted to skip the 'Close Track/Session/Disc' functions. E 23:12:02 Failed to Write Image! E 23:12:04 Operation Failed! - Duration: 00:05:42 I 23:12:04 Average Write Rate: N/A - Maximum Write Rate: N/A The other drive is a LiteOn 20A1P on an external usb cable, and here is the log: I 22:59:09 ImgBurn Version 2.4.0.0 started! I 22:59:09 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 22:59:09 Total Physical Memory: 3,405,504 KB - Available: 2,232,980 KB I 22:59:09 Initialising SPTI... I 22:59:09 Searching for SCSI / ATAPI devices... I 22:59:10 Found 2 DVD-ROMs, 1 DVD±RW and 5 DVD±RW/RAMs! I 22:59:27 Operation Started! I 22:59:27 Building Image Tree... I 22:59:27 Checking Directory Depth... I 22:59:27 Calculating Totals... I 22:59:27 Preparing Image... I 22:59:27 Checking Path Length... I 22:59:27 Contents: 20 Files, 0 Folders I 22:59:27 Size: 4,637,454,336 bytes I 22:59:27 Sectors: 2,264,382 I 22:59:27 Image Size: 4,638,048,256 bytes I 22:59:27 Image Sectors: 2,264,672 I 22:59:27 Operation Successfully Completed! - Duration: 00:00:00 I 22:59:37 Operation Started! I 22:59:37 Building Image Tree... I 22:59:40 Checking Directory Depth... I 22:59:40 Calculating Totals... I 22:59:40 Preparing Image... I 22:59:40 Checking Path Length... I 22:59:40 Contents: 20 Files, 0 Folders I 22:59:40 Size: 4,637,454,336 bytes I 22:59:40 Sectors: 2,264,382 I 22:59:40 Image Size: 4,638,048,256 bytes I 22:59:40 Image Sectors: 2,264,672 I 22:59:40 Operation Successfully Completed! - Duration: 00:00:02 I 22:59:40 Operation Started! I 22:59:40 Source File: -==/\/[bUILD IMAGE]\/\==- I 22:59:40 Source File Sectors: 2,264,672 (MODE1/2048) I 22:59:40 Source File Size: 4,638,048,256 bytes I 22:59:40 Source File Volume Identifier: I 22:59:40 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER! I 22:59:40 Source File Implementation Identifier: ImgBurn I 22:59:40 Source File File System(s): ISO9660, UDF (1.02) I 22:59:40 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL0N (J:) (USB) I 22:59:40 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x) I 22:59:40 Destination Media Sectors: 2,297,888 I 22:59:40 Write Mode: DVD I 22:59:40 Write Type: DAO I 22:59:40 Write Speed: 16x I 22:59:40 Link Size: Auto I 22:59:40 Test Mode: No I 22:59:40 OPC: Yes I 22:59:40 BURN-Proof: Enabled I 22:59:40 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes W 22:59:42 Optimum Power Calibration Failed! - Reason: No Additional Sense Information I 22:59:43 Filling Buffer... (128 MB) I 22:59:44 Writing LeadIn... W 23:02:02 Failed to Write Sectors 448 - 479 - The semaphore timeout period has expired. W 23:02:03 Retrying (1 of 20)... W 23:03:47 Retry Failed - Overlapped Commands Attempted W 23:03:47 Retrying (2 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (3 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (4 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (5 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (6 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (7 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (8 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (9 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (10 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (11 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (12 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (13 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (14 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (15 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (16 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (17 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (18 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (19 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:47 Retrying (20 of 20)... W 23:03:47 Retry Failed - Command Sequence Error W 23:03:53 Retrying (21)... W 23:03:53 Retry Failed - Command Sequence Error W 23:03:54 Retrying (22)... W 23:03:54 Retry Failed - Command Sequence Error W 23:03:55 Retrying (23)... W 23:03:55 Retry Failed - Command Sequence Error W 23:03:56 Retrying (24)... W 23:03:56 Retry Failed - Command Sequence Error W 23:03:56 Retrying (25)... W 23:03:56 Retry Failed - Command Sequence Error W 23:03:57 Retrying (26)... W 23:03:57 Retry Failed - Command Sequence Error W 23:03:57 Retrying (27)... W 23:03:57 Retry Failed - Command Sequence Error E 23:03:58 Failed to Write Sectors 448 - 479 - The semaphore timeout period has expired. I 23:03:58 Synchronising Cache... W 23:04:08 User opted to skip the 'Close Track/Session/Disc' functions. E 23:04:08 Failed to Write Image! E 23:04:10 Operation Failed! - Duration: 00:04:28 I 23:04:10 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Also both these takes a very long time to recognize the discs. So are they dead, should I throw them both in the trash or is there something that can be done? Thanks in advance.
  4. DarK HawK

    Dead drives.

    I checked both the drives with another pc that is not controlled by a jmicron, and the result is the same. The LiteOn drive now just blinks, the green lamb blinks whether there is media inside or not. I think I can now consider both the drives dead, right?
  5. DarK HawK

    Dead drives.

    I tried hooking the LH-20A1P directly on the MB, well, It did burn 2 dvds, but it took the drive 2 minutes to recognize the disc and 3 minute to finish Synchronising Cache after two failed attempts. The result DVDs are not readable on my BenQ 1655 (reads as blanks) while it reads on other LiteOn drives. here is a Log: I 01:05:55 ImgBurn Version 2.4.0.0 started! I 01:05:55 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 01:05:55 Total Physical Memory: 3,405,504 KB - Available: 2,459,900 KB I 01:05:56 Initialising SPTI... I 01:05:56 Searching for SCSI / ATAPI devices... I 01:05:56 Found 2 DVD-ROMs, 1 DVD±RW and 4 DVD±RW/RAMs! I 01:08:00 Operation Started! I 01:08:00 Building Image Tree... I 01:08:01 Checking Directory Depth... I 01:08:01 Calculating Totals... I 01:08:01 Preparing Image... I 01:08:01 Checking Path Length... I 01:08:01 Contents: 20 Files, 1 Folder I 01:08:01 Size: 4,615,183,059 bytes I 01:08:01 Sectors: 2,253,514 I 01:08:01 Image Size: 4,615,798,784 bytes I 01:08:01 Image Sectors: 2,253,808 I 01:08:01 Operation Successfully Completed! - Duration: 00:00:00 I 01:08:02 Operation Started! I 01:08:02 Building Image Tree... I 01:08:04 Checking Directory Depth... I 01:08:04 Calculating Totals... I 01:08:04 Preparing Image... I 01:08:04 Checking Path Length... I 01:08:04 Contents: 20 Files, 1 Folder I 01:08:04 Size: 4,615,183,059 bytes I 01:08:04 Sectors: 2,253,514 I 01:08:04 Image Size: 4,615,798,784 bytes I 01:08:04 Image Sectors: 2,253,808 I 01:08:05 Operation Successfully Completed! - Duration: 00:00:02 I 01:08:05 Operation Started! I 01:08:05 Source File: -==/\/[bUILD IMAGE]\/\==- I 01:08:05 Source File Sectors: 2,253,808 (MODE1/2048) I 01:08:05 Source File Size: 4,615,798,784 bytes I 01:08:05 Source File Volume Identifier: I 01:08:05 Source File Application Identifier: IMGBURN V2.4.0.0 - THE ULTIMATE IMAGE BURNER! I 01:08:05 Source File Implementation Identifier: ImgBurn I 01:08:05 Source File File System(s): ISO9660, UDF (1.02) I 01:08:05 Destination Device: [6:0:0] LITE-ON DVDRW LH-20A1P KL0N (G:) (SCSI) I 01:08:05 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x) I 01:08:05 Destination Media Sectors: 2,297,888 I 01:08:05 Write Mode: DVD I 01:08:05 Write Type: DAO I 01:08:05 Write Speed: 16x I 01:08:05 Link Size: Auto I 01:08:05 Test Mode: No I 01:08:05 OPC: Yes I 01:08:05 BURN-Proof: Enabled I 01:08:05 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 01:08:39 Filling Buffer... (128 MB) I 01:08:41 Writing LeadIn... I 01:08:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 2253807) I 01:08:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2253807) I 01:13:43 Synchronising Cache... W 01:15:55 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 01:16:49 Synchronise Cache Failed! - Reason: Write Error W 01:16:49 Retrying (2 of 3)... I 01:16:50 Image MD5: d8b65486aa0f377a228cd19de22f1ed2 I 01:16:52 Operation Successfully Completed! - Duration: 00:08:45 I 01:16:52 Average Write Rate: 15,384 KB/s (11.1x) - Maximum Write Rate: 22,201 KB/s (16.0x) Is there anything to do to this drive? I also tried to hook the DW1800 directly to MB instead through the card controller, but it still can't go past the "Retry Failed - Power Calibration Area Is Full". The weird part is, 2 dead drives in the same time with the nearly the same symptoms, how lucky Am I?
  6. DarK HawK

    Dead drives.

    Ah, I'm sorry, my bad. I'll try to hook the LH-20A1P and try, what about the DW1800, should I consider is dead or is there anything I can try?
  7. DarK HawK

    Dead drives.

    semaphore time outs are usually caused by the chip in the external case. Its possible the actuyal drive is OK, just the case its in needs changing. a search on "semaphore timeout" might show which case's are the ones to avoid This drive is not in an enclosure, it's hooked up to a card controller (jmicron chip) and it used to function correctly before I changed the firmware. I had the idea of hooking the drive up directly to MB but I guess it won't make a difference since the MB controls the drive through a jmicron chip too.
  8. DarK HawK

    The 'Translations' Topic!

    Is anyone doing the Arabic translation or should I start with it?
  9. DarK HawK

    Dead drives.

    brand and model # of your power supply? It's a Gigabyte Odin 800WATT Model #: GE-M800A-D1 The rest of drives are working ok btw.
  10. DarK HawK

    Some weird problem

    I don't think I've read anything on cdfreaks like that. It's a conclusion if I may. I had a problem, and did three things to solve it at the same time. Changed the IDE cable. Changed the driver for the controller. Changed the FW to the stock firmware. Trying to pin point the source of the problem, I hooked the old IDE cable back and burned 5 DVDs with no problem, rolled back the driver and also burned like 7 DVDs still no problem, and flashed the patched firmware back, burned one dvd and the next one gave the error again. So I jumped to the conclusion that There might be a conflict between one of the features with the Liteon and the controller..? What do you think?
  11. DarK HawK

    Some weird problem

    Hello there, I've never encountered this problem before. I'd like to mention that in both the times this problem happened, I was watching a video file fullscreen, I don't know, it might be related, coz between the two times it happened, i successfully burned one dvd without error and without a full screen video plays. Also this drive have been working fine with my old pc. Here is the log: I 16:49:47 ImgBurn Version 2.3.2.0 started! I 16:49:47 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 16:49:47 Total Physical Memory: 3,405,504 KB - Available: 2,017,124 KB I 16:49:47 Initialising SPTI... I 16:49:47 Searching for SCSI / ATAPI devices... I 16:49:47 Found 1 DVD-ROM, 1 DVD±RW and 1 DVD±RW/RAM! I 16:49:48 Project Loaded Successfully! I 16:49:59 Operation Started! I 16:49:59 Building Image Tree... I 16:50:00 Checking Directory Depth... I 16:50:00 Calculating Totals... I 16:50:00 Preparing Image... I 16:50:00 Checking Path Length... I 16:50:00 Image Size: 4,408,246,272 bytes I 16:50:00 Image Sectors: 2,152,464 I 16:50:10 Operation Successfully Completed! - Duration: 00:00:10 I 16:50:10 Operation Started! I 16:50:10 Source File: -==/\/[bUILD IMAGE]\/\==- I 16:50:10 Source File Sectors: 2,152,464 (MODE1/2048) I 16:50:10 Source File Size: 4,408,246,272 bytes I 16:50:10 Source File Volume Identifier: 24 012 I 16:50:10 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 16:50:10 Source File Implementation Identifier: ImgBurn I 16:50:10 Source File File System(s): ISO9660, UDF (1.02) I 16:50:10 Destination Device: [4:1:0] LITE-ON DVDRW LH-20A1P KL0N (H:) (SCSI) I 16:50:10 Destination Media Type: DVD-R (Disc ID: TYG03) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x) I 16:50:10 Destination Media Sectors: 2,298,496 I 16:50:10 Write Mode: DVD I 16:50:10 Write Type: DAO I 16:50:10 Write Speed: 16x I 16:50:10 Link Size: Auto I 16:50:10 Test Mode: No I 16:50:10 BURN-Proof: Enabled I 16:50:10 Filling Buffer... (128 MB) I 16:50:12 Writing LeadIn... I 16:51:04 Writing Image... (LBA: 0 - 2152463) W 16:53:31 Failed to Write Sectors 903680 - 903711 - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:53:31 Retrying (1 of 20)... W 16:53:41 Retry Failed - Cannot Write Medium - Incompatible Format From retry 2 - 200 W 16:55:02 Retry Failed - Cannot Write Medium - Incompatible Format E 16:55:03 Failed to Write Sectors 903680 - 903711 - Logical Unit Communication CRC Error (ULTRA-DMA/32) I 16:55:03 Synchronising Cache... E 16:55:04 Failed to Write Image! E 16:55:06 Operation Failed! - Duration: 00:04:53 I 16:55:06 Average Write Rate: 7,593 KB/s (5.5x) - Maximum Write Rate: 15,737 KB/s (11.4x)
  12. DarK HawK

    Some weird problem

    Thanks cornholio7. I still have some weird problem with the controller though. One dvd burned ok but the session didn't close, tried it on other units and it showed as a blank, and couldn't close the session with nero either. And btw, I figured what caused the earlier problem. The patched firmware I was using caused the problem. http://club.cdfreaks.com/f44/liteon-16a7s-...ware-new-207033 So Liteon LH-20A1P + TYG03 + C0deKing Patched firmware + jmicron controller (Both versions) = failure. The firmware enabled FastBurn + Enhanced OverSpeed + Enhanced Online HyperTuning. I will try to find which one of those feature really caused the problem for the sake of research.
  13. DarK HawK

    Some weird problem

    Out of curiosity. Does the controller affect the quality of the burn?
  14. DarK HawK

    Some weird problem

    Thanks a lot for the insight lmao2k Unfortunately I've already ordered this StarTech card with the jmicron controller for the extra IDE optical drives I have. I'll try it and give you feedback, and if it wasn't any good, I'll grab one with ITE chipset.
  15. DarK HawK

    Some weird problem

    Another thing. I've bought this card controller but didn't install it yet. Can you give me any feedback about the card and it's compatibility with optical devices. http://www.startech.com/Product/ItemDetail...T2IDE2&c=US Technical Specifications Warranty Lifetime warranty Bus Type PCI Express Connector Types 2 - SATA Data 7 pin Female Connector Types 1 - IDE 40 pin Male Carton Quantity 50 Shipping (Package) Weight 0.35 lb [0.16 kg] Chipset JMicron JMB366 Maximum Data Transfer Rate 300 Mbps (SATA2/SATA300) 133 Mbps (IDE)
  16. DarK HawK

    Some weird problem

    I did three things at the same time, one of them fixed the problem. I installed the new driver (There is a SATA mode and an IDE mode in the driver installation, and both seem to work fine). I changed the IDE cable. I changed the firmware from a patched fm to the stock firmware. One of those things did the trick, which one?, I can't say. I've burned like 10 dvds afterwards to make sure it's done. And I don't have RAID enabled.
  17. DarK HawK

    Some weird problem

    Onboard SATA/IDE Device (Enabled) Onboard SATA/IDE Device ctrl mode (IDE)
  18. DarK HawK

    Some weird problem

    Yes, there are 2 purple SATA connectors on the motherboard that are controlled by the jmicron chipset but I've assigned them to the external sata connectors. I'll check the SATA/IDE now.
  19. DarK HawK

    Some weird problem

    I have 3 storage controllers, I don't know which one is assigned to the writers. And yes, I've been using this burner for a long time on my old PC with a standard southbridge, and it never showed this problem. Also, the ide cable is the same old one, I don't think there is a problem with it.
  20. DarK HawK

    Some weird problem

    Thanks for the fast response chewy. Yes. I think the (SCSI) is the IDE controller on the motherboard. Gigabyte GA-X38-DS5 http://www.gigabyte.eu/Products/Motherboar...?ProductID=2672
  21. I have tested and tried almost every burning application out there searching for this feature, a job list or a queue list, needless to say ImgBurn is one of the best. There is no single application that can do this. The only solution is that you open 20 neros or 20 ImgBurns at the same time, and that's just lame. I've read that the problem with the queue list in Build mode is the too much options in the build mode, I'm not a programmer but I have an idea. What if the author of ImgBurn made an intermediate file with all the options stored in it, it can be like a text file or something that you save after you finish optimizing your burn. And then you can add those files to the Write mode window just like you add iso files. PLEASE PLEASE PLEASE Add queue for the build mode.
  22. DarK HawK

    File size comparision

    Well, ImgBURN just rocks. It started for me with the idea that there must be something out there better than this shit (nero). especially after I updated the nero to 7.5.XXXX, It just sucks. I tried every other program out there, Roxio, Power2Go, Instant CD/DVD NTI, you name it. I didn't try ImgBurn until someone recommended it on the cdfreaks forum, I guess the program being free made me ignore it at first. What really hooked me up, is the batch file idea for multiple burns in build mode, that saved TIIIMEEEEE. When I tried it, I was as happy as the day I started using FireFox. THANKS LUK!.
  23. DarK HawK

    Is this Burn Normal?

    I can't reach a Burn speed of more than 12X (Showing in the Write Rate on the Burning Window) The Device Buffer is always moving and sometimes it drops and the speed drops with it. Thought I might drop you some info for analysis. Burner: BENQ DVD LS DW1655 Media: Panasonic 16X DVD-R TYG03 Writing Speed: 16X Size of Data Burned: 4,624,089,088 Burn Time: 7:23 DVDInfo Graph: Quality Scan: Is there something wrong or Is this what it's supposed to look like? Another question. Also have 3 other DVD-RWs: ASUS 1814BL BENQ DW1800 LiteOn LH-20A1H NEC Sony Optiarc 5170a But I guess the BENQ DW1655 is the best Burner, Am I right?
  24. DarK HawK

    Is this Burn Normal?

    Thank you for your reply dontasciime. I figured that the new version of cdspeed got improvements regarding the new LightON error reporting capabilities. I got it, but I'm worrying that the new version might have difference in the reporting and render all my reference scans useless and I might need to do them again. I'll do it anyway. What did you think of the scans BTW?
×

Important Information

By using this site, you agree to our Terms of Use.