Jump to content

IMG BURN Error! : Write Error Please Help


IBEUD
 Share

Recommended Posts

Ok Guys I'm having this problem with IMG Burn it allways gives me this error when burning DL discs.. I've allready tried with 2 different DVD Burners and it gives me the same error. I've also tried with other burning programs and it won't let me burn my DL discs.

 

Here's my Log:

 

I 11:17:25 Source File Size: 7,835,516,928 bytes

I 11:17:25 Source File Volume Identifier: XGD2DVD_NTSC

I 11:17:25 Source File Volume Set Identifier: 34672923

I 11:17:25 Source File Implementation Identifier: Sonic Scenarist 3.1

I 11:17:25 Source File File System(s): ISO9660, UDF (1.02)

I 11:17:25 Destination Device: [2:0:0] PIONEER DVD-RW DVR-216D 1.09 (F:) (ATA)

I 11:17:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)

I 11:17:25 Destination Media Sectors: 4,173,824

I 11:17:25 Write Mode: DVD

I 11:17:25 Write Type: DAO

I 11:17:25 Write Speed: 2.4x

I 11:17:25 Link Size: Auto

I 11:17:25 Test Mode: No

I 11:17:25 OPC: No

I 11:17:25 BURN-Proof: Enabled

I 11:17:26 Optimal L0 Data Zone Capacity: 1,913,760

I 11:17:26 Optimal L0 Data Zone Method: Copied From Original Disc

I 11:17:46 Filling Buffer... (40 MB)

I 11:17:48 Writing LeadIn...

I 11:17:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825935)

I 11:17:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825935)

I 11:17:50 Writing Layer 0... (LBA: 0 - 1913759)

W 11:26:15 Failed to Write Sectors 776128 - 776159 - Reason: Write Error

W 11:26:15 Retrying (1 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (2 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (3 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (4 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (5 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (6 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (7 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (8 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (9 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (10 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (11 of 20)...

W 11:26:22 Retry Failed - Reason: Invalid Address For Write

W 11:26:22 Retrying (12 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (13 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (14 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (15 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (16 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (17 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (18 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (19 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:26:23 Retrying (20 of 20)...

W 11:26:23 Retry Failed - Reason: Invalid Address For Write

W 11:44:41 Retrying (21)...

W 11:44:41 Retry Failed - Reason: Invalid Address For Write

W 11:44:42 Retrying (22)...

W 11:44:42 Retry Failed - Reason: Invalid Address For Write

W 11:44:42 Retrying (23)...

W 11:44:42 Retry Failed - Reason: Invalid Address For Write

E 11:44:43 Failed to Write Sectors 776128 - 776159 - Reason: Write Error

E 11:44:43 Next Writable Address: 775408

I 11:44:44 Synchronising Cache...

W 11:44:51 User opted to skip the 'Close Track/Session/Disc' functions.

E 11:44:51 Failed to Write Image!

E 11:44:51 Operation Failed! - Duration: 00:27:25

I 11:44:51 Average Write Rate: 962 KB/s (0.7x) - Maximum Write Rate: 3,358 KB/s (2.4x)

 

 

Any Help would be greatly appreciated.

Link to comment
Share on other sites

mmalves.. I will try different speeds to see what happens..I was also cheking out some Verbatims online, that If the media that I have right now does not work then I will have to buy those.. also I was wondering bcuz I've been trying to burn x360 isos, if I burn at another speed other than 2.4 i hardly doubt the console will read them. :(

Link to comment
Share on other sites

I have been using ImgBurn for years with no problems, but I had to restore my OS and since then I've been having problems burning the same media I always used with no problems, verbs(2.4x), memox and stuff. I wonder if i have to install any additional drivers? I am using xp pro sp3 and a OEM burner that all it says is "made in China" I have burned a lot of 360 backups with this drive and it's just now that I have the problem.

Link to comment
Share on other sites

ok guys I actually tried burning some discs with 4x as the speed I burned 2 and they burned good and they work on the console. yet when I try to burn at 2.4x they won't work.. I guess that my Pioneer burns them well at 4x rather than 2.4x?

Link to comment
Share on other sites

Guys I tried burning again.. and randomly I got The Power Calibration Error.. any ideas? :S

 

I 13:54:07 ImgBurn Version 2.4.2.0 started!

I 13:54:07 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 13:54:07 Total Physical Memory: 1,963,788 KB - Available: 1,200,956 KB

I 13:54:07 Initialising SPTI...

I 13:54:07 Searching for SCSI / ATAPI devices...

I 13:54:08 Found 1 DVD

Link to comment
Share on other sites

ok guys check this out.. I tried burning a DVD Dl at 6x.. I noticed that the speed does not stay constant it actually came down from 6x to 2x.. and In one moment it went all the way down to 0, it actually stopped burning, I thought i was gonna get the error again, then out of nowherethe buffer came back up and it actually burned.. any ideas on this.. I can't believe that the media makes such an impact on the drive.. any suggestions?

Link to comment
Share on other sites

Hi IBEUD,

 

as others here already said, Media Quality is your Problem.

As you're already using the latest Firmware for your Drive, there's really nothing much you can do.

I've read that some People have better luck burning these Discs on the Drive by swapping Firmware Write-Strategies (to eg MKM Strategies) using 'MediaCodeSpeedEdit', but others have reported this won't help very much for them.

 

As you can read in other Forum Threads here, the only good Double-Layer Media are Verbatim Discs (made in Singapure).

The good old 2.4x Verbatim (MKM-001) are the best, 2nd best in my opinion are the 8x Verbatim (MKM-003, Made in Singapure), although I also only burn them at 2.4x Speed, as that will achive the same Qualiy with my Burners as with the 2.4x ones.

 

If there aren't any Verbatim DL Discs "Made in Singapure" available for you, just buy the Verbatims available (most likely Made in India).

They won't reach the same Quality as the 'Made in Singapure' Discs, but they nevertheless are of much better Quality than every other Dual-Layer Media Brand on the Marked.

 

In my experience, all Media-Brands other than Verbatim will absolutely need the right Media/Burner/Firmware combination to lead to a (nearly) good burn.

If you're not using a optimal Media/Burner/Firmware combination, your Burns will sooner or later most likely lead to very expensive coasters.

Also you'll sometimes get Verbatim Discs for the nearly same Price as other Brands.

 

(Eg, you can buy Verbatim 8x DL+R Discs 'Made in Singapure' in 'Real Market' here in Germany for a Price of 9 to 14 Euro (10 Pieces Spindle), which is a really fair Price here (you mabe can get them cheaper onine).

Link to comment
Share on other sites

Thank you for the Info Jim Knopf.. I am indeed considering buying Verbatim Discs lol.. beacuse every Ritek that I try to burn it gives me either a Power Calibration error or a Invalid Adress to write :(

Link to comment
Share on other sites

thanks alot for the Help Cynthia.. and others =) I will try at those different speeds also. Plus I actually tried some other media ID Rico? something of that nature and they are working at 2.4 and 4x speeds until I get my verbatims in the mail. haha

Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.