Blu Ray failure

[Jimbo]

Just tried to burn a blu ray. Here is the result:

 

ImgBurn Version 2.5.0.0 - Log

; Thursday, 07 January 2010, 10:42:30

; \\****************************************//

;

;

I 10:26:05 ImgBurn Version 2.5.0.0 started!

I 10:26:05 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 10:26:05 Total Physical Memory: 1,833,744 KB - Available: 1,070,084 KB

W 10:26:05 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 10:26:05 Initialising SPTI...

I 10:26:05 Searching for SCSI / ATAPI devices...

I 10:26:12 Found 2 DVD±RW/RAMs, 1 BD-ROM and 2 BD-ROM/HD DVD-ROMs!

I 10:26:12 Operation Started!

I 10:26:12 Building Image Tree...

I 10:26:12 Calculating Totals...

I 10:26:12 Preparing Image...

I 10:26:12 Contents: 9 Files, 14 Folders

I 10:26:12 Content Type: BD Video

I 10:26:12 Data Type: MODE1/2048

I 10:26:12 File System(s): UDF (2.50)

I 10:26:12 Volume Label: THE_MERRY_GENTLEMAN

I 10:26:12 Size: 8,067,217,912 bytes

I 10:26:12 Sectors: 3,939,078

I 10:26:12 Image Size: 8,068,104,192 bytes

I 10:26:12 Image Sectors: 3,939,504

I 10:26:12 Operation Successfully Completed! - Duration: 00:00:00

I 10:26:13 Operation Started!

I 10:26:13 Source File: -==/\/[bUILD IMAGE]\/\==-

I 10:26:13 Source File Sectors: 3,939,504 (MODE1/2048)

I 10:26:13 Source File Size: 8,068,104,192 bytes

I 10:26:13 Source File Volume Identifier: THE_MERRY_GENTLEMAN

I 10:26:13 Source File Application Identifier: ImgBurn v2.5.0.0

I 10:26:13 Source File Implementation Identifier: ImgBurn

I 10:26:13 Source File File System(s): UDF (2.50)

I 10:26:13 Destination Device: [0:0:0] ATAPI DVD A DH16A6L-C ZHCH (F:) (USB)

I 10:26:13 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x)

I 10:26:13 Destination Media Sectors: 4,173,824

I 10:26:13 Write Mode: DVD

I 10:26:13 Write Type: DAO

I 10:26:13 Write Speed: MAX

I 10:26:13 Link Size: Auto

I 10:26:13 Lock Volume: Yes

I 10:26:13 Test Mode: No

I 10:26:13 OPC: No

I 10:26:13 BURN-Proof: Enabled

I 10:26:13 Book Type Setting: N/A

I 10:26:13 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 10:26:13 Optimal L0 Data Zone Capacity: 1,969,760

I 10:26:13 Optimal L0 Data Zone Method: ECC Block Boundary

E 10:42:30 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Is Full

E 10:42:30 Operation Failed! - Duration: 00:16:17

I 10:42:30 Average Write Rate: N/A - Maximum Write Rate: N/A

I 10:42:30 Close Request Acknowledged

I 10:42:30 Closing Down...

I 10:42:30 Shutting down SPTI...

I 10:42:30 ImgBurn closed!

;

[mmalves]

Try burning at 6x or 4x with a brand new blank disc. If it doesn't work then read this -> http://forum.imgburn.com/index.php?showtopic=8000

[LIGHTNING UK!]

Don't confuse people with misleading subject headings or post content, you're not burning Blu-ray, you're burning DVD+R DL!

 

What you're burning to the disc is of no consequence (the drive doesn't know or care), only the actual type of disc is important.

[Jimbo]

Don't confuse people with misleading subject headings or post content, you're not burning Blu-ray, you're burning DVD+R DL!

 

What you're burning to the disc is of no consequence (the drive doesn't know or care), only the actual type of disc is important.

 

I was not intentionally misleading, do you have any advice?

[LIGHTNING UK!]

Yeah, read what mmalves said!