Jimbo Posted January 7, 2010 Share Posted January 7, 2010 Just tried to burn a blu ray. Here is the result: ImgBurn Version 2.5.0.0 - Log ; Thursday, 07 January 2010, 10:42:30 ; \\****************************************// ; ; I 10:26:05 ImgBurn Version 2.5.0.0 started! I 10:26:05 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 10:26:05 Total Physical Memory: 1,833,744 KB - Available: 1,070,084 KB W 10:26:05 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 10:26:05 Initialising SPTI... I 10:26:05 Searching for SCSI / ATAPI devices... I 10:26:12 Found 2 DVD±RW/RAMs, 1 BD-ROM and 2 BD-ROM/HD DVD-ROMs! I 10:26:12 Operation Started! I 10:26:12 Building Image Tree... I 10:26:12 Calculating Totals... I 10:26:12 Preparing Image... I 10:26:12 Contents: 9 Files, 14 Folders I 10:26:12 Content Type: BD Video I 10:26:12 Data Type: MODE1/2048 I 10:26:12 File System(s): UDF (2.50) I 10:26:12 Volume Label: THE_MERRY_GENTLEMAN I 10:26:12 Size: 8,067,217,912 bytes I 10:26:12 Sectors: 3,939,078 I 10:26:12 Image Size: 8,068,104,192 bytes I 10:26:12 Image Sectors: 3,939,504 I 10:26:12 Operation Successfully Completed! - Duration: 00:00:00 I 10:26:13 Operation Started! I 10:26:13 Source File: -==/\/[bUILD IMAGE]\/\==- I 10:26:13 Source File Sectors: 3,939,504 (MODE1/2048) I 10:26:13 Source File Size: 8,068,104,192 bytes I 10:26:13 Source File Volume Identifier: THE_MERRY_GENTLEMAN I 10:26:13 Source File Application Identifier: ImgBurn v2.5.0.0 I 10:26:13 Source File Implementation Identifier: ImgBurn I 10:26:13 Source File File System(s): UDF (2.50) I 10:26:13 Destination Device: [0:0:0] ATAPI DVD A DH16A6L-C ZHCH (F:) (USB) I 10:26:13 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x) I 10:26:13 Destination Media Sectors: 4,173,824 I 10:26:13 Write Mode: DVD I 10:26:13 Write Type: DAO I 10:26:13 Write Speed: MAX I 10:26:13 Link Size: Auto I 10:26:13 Lock Volume: Yes I 10:26:13 Test Mode: No I 10:26:13 OPC: No I 10:26:13 BURN-Proof: Enabled I 10:26:13 Book Type Setting: N/A I 10:26:13 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 10:26:13 Optimal L0 Data Zone Capacity: 1,969,760 I 10:26:13 Optimal L0 Data Zone Method: ECC Block Boundary E 10:42:30 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Is Full E 10:42:30 Operation Failed! - Duration: 00:16:17 I 10:42:30 Average Write Rate: N/A - Maximum Write Rate: N/A I 10:42:30 Close Request Acknowledged I 10:42:30 Closing Down... I 10:42:30 Shutting down SPTI... I 10:42:30 ImgBurn closed! ; Link to comment Share on other sites More sharing options...
mmalves Posted January 7, 2010 Share Posted January 7, 2010 Try burning at 6x or 4x with a brand new blank disc. If it doesn't work then read this -> http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 7, 2010 Share Posted January 7, 2010 Don't confuse people with misleading subject headings or post content, you're not burning Blu-ray, you're burning DVD+R DL! What you're burning to the disc is of no consequence (the drive doesn't know or care), only the actual type of disc is important. Link to comment Share on other sites More sharing options...
Jimbo Posted January 8, 2010 Author Share Posted January 8, 2010 Don't confuse people with misleading subject headings or post content, you're not burning Blu-ray, you're burning DVD+R DL! What you're burning to the disc is of no consequence (the drive doesn't know or care), only the actual type of disc is important. I was not intentionally misleading, do you have any advice? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 8, 2010 Share Posted January 8, 2010 Yeah, read what mmalves said! Link to comment Share on other sites More sharing options...
Recommended Posts