ivefan

Change the cable connecting the Burner? Same cable worked before and i don't think i have a spare.

I read the FAQ, and tried the things under; Problem: You're burning at slow speeds. 'Slow' typically being no more than 2x - even on higher rated media. As that was the only thing mentioning DMA. I also read the "fix your DMA!" in your signature. My problem in following the FAQ is that i do not have a controller corresponding to my Burner and when looking at the properties of my channels they all say Auto or DMA if available. I did not find DMA in bios but i could have overlooked it so i will check again. ~edit~ Nope, only thing i found mentioning DMA was "ECP Mode Use DMA"(3) and the only option i had for the channels in bios was auto or none

I don't even have a controller. I've got 4 primary channels, 4 secondary channels and 4 standard dual channel PCI IDE controllers. Got latest drivers and it worked before I reinstalled windows. looked through the channels and they all said auto or DMA if possible

Trying to but an Image on Verbatim DL disc, tried in both 2,4x and 4x, which imgburn tells me the disc supports. getting the error; I/O error Device:My burner ScsiStatus: 0x02 Interpretation: Check condition CDB: 2A 00 00 00 14 40 00 00 20 00 Interpretation: write(10) - sectors: 5184 - 5215 Sense area: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 00 00 Interpretation: Logical unit communication CRC error (ULTRA-DMA/32) I 13:14:36 ImgBurn Version 2.4.1.0 started! I 13:14:36 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:14:36 Total Physical Memory: 2096620 KB - Available: 1545348 KB I 13:14:36 Initialising SPTI... I 13:14:36 Searching for SCSI / ATAPI devices... I 13:14:37 Found 2 DVD-ROMs and 2 DVD