ivefan
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by ivefan
-
-
I read the FAQ, and tried the things under; Problem:
You're burning at slow speeds. 'Slow' typically being no more than 2x - even on higher rated media.
As that was the only thing mentioning DMA.
I also read the "fix your DMA!" in your signature.
My problem in following the FAQ is that i do not have a controller corresponding to my Burner and when looking at the properties of my channels they all say Auto or DMA if available.
I did not find DMA in bios but i could have overlooked it so i will check again.
~edit~
Nope, only thing i found mentioning DMA was "ECP Mode Use DMA"(3) and the only option i had for the channels in bios was auto or none
-
I don't even have a controller. I've got 4 primary channels, 4 secondary channels and 4 standard dual channel PCI IDE controllers.
Got latest drivers and it worked before I reinstalled windows.
looked through the channels and they all said auto or DMA if possible
-
Trying to but an Image on Verbatim DL disc, tried in both 2,4x and 4x, which imgburn tells me the disc supports.
getting the error;
I/O error
Device:My burner
ScsiStatus: 0x02
Interpretation: Check condition
CDB: 2A 00 00 00 14 40 00 00 20 00
Interpretation: write(10) - sectors: 5184 - 5215
Sense area: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 00 00
Interpretation: Logical unit communication CRC error (ULTRA-DMA/32)
I 13:14:36 ImgBurn Version 2.4.1.0 started!
I 13:14:36 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 13:14:36 Total Physical Memory: 2096620 KB - Available: 1545348 KB
I 13:14:36 Initialising SPTI...
I 13:14:36 Searching for SCSI / ATAPI devices...
I 13:14:37 Found 2 DVD-ROMs and 2 DVD
Invalid adress for write
in ImgBurn Support
Posted
Change the cable connecting the Burner?
Same cable worked before and i don't think i have a spare.