canman

well folks , i am at a loss here, upgraded to newest version 2.4.2, bought new discs, and tried to burn movie, again it plays fine in the player that burned it , but when i try to play it in dvd player it freezes up after 10 min , also it errors out on the verify , always at 67% , (which i find weird), i was wondering if my burner is getting weak, (is that possible). it is a couple of year old now, or is there settings that i may be missing , from the older version to the newer version. any more ideas or help would be appreciated. thanks canman

yes vovlo i am using my laptop to burn these discs, i am going to town today, will see about getting a few better discs, what brand should i look for, will also try to slow down the write speeds too see if that works thanks canman wierd that they say only 8x supported, says 16x on the disc itself

cynthia, i found the scan disc option on the nero speed , scanned a disc and it showing me errors and bad sectors at about 65% complete , and yes the discs work fine in my lappy, i had verify turned off cause alot of times i am away when it burns and it ejects the tray, figured it would allow dirt and dust in there. here is a snippet from a disc burned with the verify on , got a error at 67% , clicked on try again and it continued till the end. I 21:42:22 Operation Started! I 21:42:22 Source File: -==/\/[bUILD IMAGE]\/\==- I 21:42:22 Source File Sectors: 2,043,488 (MODE1/2048) I 21:42:22 Source File Size: 4,185,063,424 bytes I 21:42:22 Source File Volume Identifier: DANECOOK2 I 21:42:22 Source File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 21:42:22 Source File Implementation Identifier: ImgBurn I 21:42:22 Source File File System(s): ISO9660, UDF (1.02) I 21:42:22 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 21:42:22 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 21:42:22 Destination Media Sectors: 2,295,104 I 21:42:22 Write Mode: DVD I 21:42:22 Write Type: DAO I 21:42:22 Write Speed: 16x I 21:42:22 Link Size: Auto I 21:42:22 Test Mode: No I 21:42:22 OPC: No I 21:42:22 BURN-Proof: Enabled I 21:42:22 Book Type Setting: N/A I 21:42:53 Filling Buffer... (40 MB) I 21:42:54 Writing LeadIn... I 21:42:57 Writing Session 1 of 1... (1 Track, LBA: 0 - 2043487) I 21:42:57 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2043487) W 21:46:49 Waiting for buffers to recover... W 21:46:58 Waiting for hard disk activity to reach threshold level... I 21:47:01 Writing Sectors... I 21:52:20 Synchronising Cache... I 21:52:21 Closing Track... I 21:52:22 Finalising Disc... I 21:53:13 Exporting Graph Data... I 21:53:13 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_9-42_PM_RICOHJPN-R03-04_16x.ibg I 21:53:13 Export Successfully Completed! I 21:53:13 Operation Successfully Completed! - Duration: 00:10:51 I 21:53:13 Average Write Rate: 7,272 KB/s (5.3x) - Maximum Write Rate: 10,870 KB/s (7.8x) I 21:53:13 Cycling Tray before Verify... W 21:53:23 Waiting for device to become ready... I 21:53:44 Device Ready! I 21:53:46 Operation Started! I 21:53:46 Source Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 21:53:46 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 21:53:46 Image File: -==/\/[bUILD IMAGE]\/\==- I 21:53:46 Image File Sectors: 2,043,488 (MODE1/2048) I 21:53:46 Image File Size: 4,185,063,424 bytes I 21:53:46 Image File Volume Identifier: DANECOOK2 I 21:53:46 Image File Application Identifier: IMGBURN V2.4.1.0 - THE ULTIMATE IMAGE BURNER! I 21:53:46 Image File Implementation Identifier: ImgBurn I 21:53:46 Image File File System(s): ISO9660, UDF (1.02) I 21:53:46 Read Speed (Data/Audio): MAX / MAX I 21:53:46 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2043487) I 21:53:46 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2043487) W 22:09:31 Failed to Read Sector 1324160 - Reason: Unknown (CRC or ECC Error) (0x10, 0x90) W 22:09:31 Sector 1324160 maps to File: \VIDEO_TS\VTS_01_3.VOB E 22:09:43 Failed to Read Sector 1324161 - Reason: Unknown (CRC or ECC Error) (0x10, 0x90) E 22:09:43 Sector 1324161 maps to File: \VIDEO_TS\VTS_01_3.VOB E 22:09:43 Failed to Verify Sectors! I 22:09:45 Exporting Graph Data... I 22:09:45 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_9-42_PM_RICOHJPN-R03-04_16x.ibg I 22:09:45 Export Successfully Completed! E 22:09:45 Operation Failed! - Duration: 00:15:57 I 22:09:45 Average Verify Rate: 2,767 KB/s (2.0x) - Maximum Verify Rate: 4,568 KB/s (3.3x) I 22:10:31 Close Request Acknowledged I 22:10:31 Closing Down... I 22:10:31 Shutting down SPTI... I 22:10:31 ImgBurn closed!

cynthia, i dl the program, and tried to run it , i only have option under setting for 3x or max , also the start button is greyed out , any ideas ??am i missing something here ?? thanks canman

i am using the same discs that i normally use, memorex dvd+r, also the same programs as always here is a snippet fro the log that i tried to burn the other night. the disc plays for about 5-10 min and then freezes I 22:56:36 Operation Started! I 22:56:36 Source File: C:\Documents and Settings\steve\My Documents\Downloads\Good.Luck.Chuck.NTSC.DVD-R.DVDSeeders\Good.Luck.Chuck.NTSC.DVD-R.DVDSeeders.iso I 22:56:36 Source File Sectors: 2,266,520 (MODE1/2048) I 22:56:36 Source File Size: 4,641,832,960 bytes I 22:56:36 Source File Volume Identifier: GOOD_LUCK_CHUCK I 22:56:36 Source File Volume Set Identifier: 487755BB________GOOD_LUCK_CHUCK I 22:56:36 Source File Application Identifier: DVDFAB I 22:56:36 Source File Implementation Identifier: FENGTAO SOFTWARE I 22:56:36 Source File File System(s): ISO9660, UDF (1.02) I 22:56:36 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N HA01 (D:) (ATA) I 22:56:36 Destination Media Type: DVD+R (Disc ID: RICOHJPN-R03-04) (Speeds: 4x, 8x) I 22:56:36 Destination Media Sectors: 2,295,104 I 22:56:36 Write Mode: DVD I 22:56:36 Write Type: DAO I 22:56:36 Write Speed: MAX I 22:56:36 Link Size: Auto I 22:56:36 Test Mode: No I 22:56:36 OPC: No I 22:56:36 BURN-Proof: Enabled I 22:56:36 Book Type Setting: N/A I 22:57:06 Filling Buffer... (40 MB) I 22:57:08 Writing LeadIn... I 22:57:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 2266519) I 22:57:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2266519) I 23:06:53 Synchronising Cache... I 23:06:54 Closing Track... I 23:06:55 Finalising Disc... I 23:07:32 Exporting Graph Data... I 23:07:33 Graph Data File: C:\Documents and Settings\steve\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HA01_THURSDAY-AUGUST-07-2008_10-56_PM_RICOHJPN-R03-04_MAX.ibg I 23:07:33 Export Successfully Completed! I 23:07:33 Operation Successfully Completed! - Duration: 00:10:53 I 23:07:33 Average Write Rate: 7,788 KB/s (5.6x) - Maximum Write Rate: 11,364 KB/s (8.2x) I 23:09:59 Close Request Acknowledged I 23:09:59 Closing Down... I 23:09:59 Shutting down SPTI... I 23:09:59 ImgBurn closed! I 21:41:45 ImgBurn Version 2.4.1.0 started!

i have been using imageburn and making dvd's for a while now , and never had any problems. i recently updated my version of imgburn, and now it does not seem to work properly. i use dvdflick to author the dvd and imgburn to write it, i insert the dvd into the player, and it will work for about 10 min or so then freeze up. i have cleaned both the dvd player and my dvd burner with a store bought cleaner disc, and no luck, i was wondering if there was some setting that i have missed from the old version to the new one, or if my burner might be out of wack if that is possible. i just don't see while it would play for 10 min and then freeze . i still have disks that i burner a year ago and they seem to play all the way through. any suggestions or advice would be appreciated! canman