jr2647

I don't have a PCI SATA card it is working right off the motherboard SATA plugin. I am not sure how to change the controller from RAD to standard as when I access the BIOS it looks like the only choices are on or off on the SATA drive Iam looking at.

I have 4 USB external Hard Drives as I use this as a media server. I also have internal DVD burner as well as my internal LG BD burner. Intel P965/G965 I beleive is my chipset. A SATA raid controller is what my LG blu Ray burner is plugged into and not sure about the other DVD burner. I can't hink of any thing I have added but maybe my last external HDD. I have a Dell XPS 410.

For some reason when I start ImgBurn it now gets stuck on the searching for scsi adapters... I am running Vista and have not had a problem until lately. I am including my log below: I 13:55:20 ImgBurn Version 2.4.2.0 started! I 13:55:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 13:55:20 Total Physical Memory: 3,142,684 KB - Available: 2,104,044 KB W 13:55:20 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 Drive L:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 13:55:20 I/O Interface 'Debug Mode' Enabled! I 13:55:20 Initialising SPTI... I 13:55:20 Searching for SCSI / ATAPI devices... I 13:55:20 Initialising Device (\\.\CdRom0)... I 13:55:20 Device Address: [0:1:0] I 13:55:20 Drive Letter: (D:) I 13:55:20 Device Maximum Transfer Length: 131,072 I 13:55:20 Device Maximum Physical Pages: 33 I 13:55:20 Device Alignment Mask: 1 I 13:55:20 Device Bus Type (Adapter/Device): ATAPI / ATAPI I 13:55:20 [0:1:0] (D:) (ATAPI) I 13:55:20 CDB: 12 00 00 00 60 00 I 13:55:20 CDB Interpretation: Inquiry Any help is appreciated. I am using an LG Blu Ray Burner.

I am having a problem burning Blu Ray disks. Imgburn keeps getting stuck at :Searching for SCSI / ATAPI devices... I am running Vista and have been able to burn some ABlu Rays before but now it just keeps getting stuck there. I am using an LG Blu Ray read write burner. Here is my log: I 13:55:20 ImgBurn Version 2.4.2.0 started! I 13:55:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 13:55:20 Total Physical Memory: 3,142,684 KB - Available: 2,104,044 KB W 13:55:20 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 Drive L:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 13:55:20 I/O Interface 'Debug Mode' Enabled! I 13:55:20 Initialising SPTI... I 13:55:20 Searching for SCSI / ATAPI devices... I 13:55:20 Initialising Device (\\.\CdRom0)... I 13:55:20 Device Address: [0:1:0] I 13:55:20 Drive Letter: (D:) I 13:55:20 Device Maximum Transfer Length: 131,072 I 13:55:20 Device Maximum Physical Pages: 33 I 13:55:20 Device Alignment Mask: 1 I 13:55:20 Device Bus Type (Adapter/Device): ATAPI / ATAPI I 13:55:20 [0:1:0] (D:) (ATAPI) I 13:55:20 CDB: 12 00 00 00 60 00 I 13:55:20 CDB Interpretation: Inquiry Any help would be appreciated.