shen293
-
Posts
89 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by shen293
-
-
Side note...
Is western digital a converter box or something?
Coz I nvr heard of it b4
-
@mmalves
What is sharpening?
And @cynthia
I wouldn't want to use a smaller monitor
Everyone nowadays have a HDTV...which is like 40+inches xD
Thx for the info tho =)
-
hey guys..
This may be a little off topic but I hope u guys can help me out..
First off I know that we can use DVD FLICK to convert movies to DVD format
But I realized that when I convert it ...the video quality isnt the same...
After the conversion..the video turns out a little blurrer
I tried looking around google to see if I can change the quality through fixing the settings
Up till now I can't find any
Do you guys knows solutions To this?
I just wanna burn a movie so that it's on a disc w/ same video quality and playable on dvd player
Thanks help would be helpful
-
I checked it before...
nothing much
doesnt really tell to how to burn it to a DVD as you could've just downloaded and play it off the computer
but for me, as to try and save space I want to burn it to DVD
ok I'll try to burn it
thanks =)
-
its an .exe file tho.. I believe
cant seem to open it in notepad
this file is the setup installation file..
-
sry..which one are you talking about to burn tho?
the one with a whole bunch of different files?
or the compressed one?
(im assuming you meant the first one yea?)
-
I got 3 .dll files
1 setup file MS-DOS batch file(which im suppose to run to get to installation setup)
like 5 winrar archive folders
and 1 readme folder
should I choose to burn these files?
or the 1 file compressed one?
thanks
-
I did it before...
but now I totally forgot xD
and I went through around looking
some say it has to be in ISO file?
any ideas?
-
This may be a little off topic but
the question is how to burn downloaded computer games?
My game file is in rar. format and I want to burn the game in a sense that whenever I pop in the disc..
the Installlation setup for the game
so how do I do that before I start burning the game?
Do I just burn the file as a whole? or no? (not sure if you guys understand what I'm saying)
-
Ok so I burned an ISO file today and this is my results:
I 12:36:51 ImgBurn Version 2.4.2.0 started!
I 12:36:51 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 12:36:51 Total Physical Memory: 2,030,056 KB - Available: 1,516,876 KB
W 12:36:51 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 12:36:51 Initialising SPTI...
I 12:36:51 Searching for SCSI / ATAPI devices...
I 12:36:52 Found 1 DVD-ROM and 1 DVD
-
Thanks you guys for helping me out so much!!
I'll burn another file and verify it to see the differ in outcome and post it up here
-
I noticed
Ok so here is the info on my added RAM
First RAM (faulty/default)
Cached:1983M
RsvdMem:276M
MemMap:e820-Std
Test:Std
Pass:1
Errors: 15872
Ecc Errors:0
Second RAM
Cached: 1983M
RsvdMem: 276M
MemMap: e820-Std
Cache: On
Ecc: Off
Test: Std
Pass:1
Ecc Errors: -
Ok so i removed the faulty RAM
and now I should assume that when I verify my burn
it should have no errors yea?
-
I'll try that out
and is it possible that RAM can cause this much error?(as in constant crashing) and also verifying errors..
and since that theres errors while verifying..
does that mean that the file that I burn wasn't 100% successful?
-
Hmm...I've been noticing that alot since you mentioned it...
My computer has been like crashing alot...
but then during the memtest...there were like 2 sections that says errors..
1 says (I'm not sure how much but alot) the other says none...
-
And so I should assume that its my RAM thats causing these errrs?
-
Ok So I already run the memtest..
and noticed that theres a lot of errors..
where can I go to check the results?
and also what should I do now?
-
Hmm...just wondering since I have 3 gb RAM and u said that it might take a while ...
Is that luke a good thing or bad thing?
I'll do as u instruct soon...thx for it
-
hmmm...I tried using one of the link..
and I'm kinda lost now to what I havta do
it says that the file is supported...
is there a guide to how to use it? sorry...
-
Ok...so I used Read mode and have no problems
here is my log:
I 20:26:49 ImgBurn Version 2.4.2.0 started!
I 20:26:49 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 20:26:49 Total Physical Memory: 3,078,632 KB - Available: 2,418,944 KB
W 20:26:49 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 20:26:49 Initialising SPTI...
I 20:26:49 Searching for SCSI / ATAPI devices...
I 20:26:59 Found 1 DVD-ROM and 1 DVD
-
Isnt that the same/similar function as DVD Shrink except that it doesn't need to be in a video ts file?
Hmm...I believe that I haven't tried read mode yet...I'll try it ASAP and update you...thxs
-
I nvr used Read mode before...
Should I try tho?
and just to make sure.. read mode requires two discs yea?
1 to take the files from..the other is to burn it on the blank disc ...I believe so?
-
Im sorry
I dont know where I can find memtest to run it..
what is it and what does it do?
sry im new to this...
thanks
-
They are made in Taiwan...
I was burning an ISO file..thats why I chose 4x speed..
as now my burning are like always successful compared to b4..
but verifying whatever file such as...Video_ts file ...ISO file and others..always give me some kind of error..
-
Hi...
So I burned a DVD and upon verifying..I get multiple erros..but while during the burn...it said it was 100% successful...
I was wondering... to why I get so many errors while verifying?
Here is my log:
I 00:00:58 ImgBurn Version 2.4.2.0 started!
I 00:00:58 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 00:00:58 Total Physical Memory: 3,078,632 KB - Available: 2,399,824 KB
W 00:00:58 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 00:00:58 Initialising SPTI...
I 00:00:58 Searching for SCSI / ATAPI devices...
I 00:00:58 Found 1 DVD-ROM and 1 DVD
Little off-topic: how to convert files to DVD format
in ImgBurn Support
Posted
thx for all the help =)