I never have had a problem burning dual layer DVD's up until the past couple of weeks. I have been using Memorex DVD+R DL discs. Of course, Verbatim discs are the best, but I have never had a problem with Memorex before. It seems like my burners fail at 50% every time with ImgBurn. I used Nero as well and the disc burned 100%, but it still says it was a failed burn. Here is an image of the error I am having. I have posted a log below as well. Any help would be appreciated.
Error Image - http://i43.tinypic.com/11kv8r6.jpg
UDF compilation
4:37:46 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
4:37:46 AM #2 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : manual
UDF Revision : 2.50
UDF Partition Type : physical
4:37:47 AM #3 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media
4:37:47 AM #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '2.50' to '2.50'
4:37:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 1858
You are burning a disc in UDF version 2.5 or higher.
Therefore, the disc may not be accessible in every operating system.
4:37:47 AM #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '2.50' to '2.50'
4:37:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 1858
You are burning a disc in UDF version 2.5 or higher.
Therefore, the disc may not be accessible in every operating system.
4:37:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3983119 (885:08.19, 7779MB)
4:37:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
4:37:57 AM #10 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD+R DL
4:37:57 AM #11 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: DVD+R DL. Medium required by compilation: DVD R/RW, DVD+R DL.)
4:37:57 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3983120 (3983120) = #3983120/885:8.20
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3983120 blocks [D: _NEC DVD+-RW ND-6650A]
--------------------------------------------------------------
4:38:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [D: _NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8157429760, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3983120 | 0 | 0x00
3983120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
4:38:27 AM #14 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
4:38:27 AM #15 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
4:38:27 AM #16 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
4:38:27 AM #17 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
4:38:27 AM #18 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
4:38:27 AM #19 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2.4x (3,324 KB/s)
4:38:27 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:38:27 AM #21 Text 0 File DVDPlusDualLayer.cpp, Line 1856
GetDriveCaps: LAST LBA of layer 1 is 0
4:38:27 AM #22 Text 0 File DVDPlusDualLayer.cpp, Line 768
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
4:38:27 AM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 784
Burning Layer 1
4:38:27 AM #24 Text 0 File DVDPlusDualLayer.cpp, Line 794
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
4:38:27 AM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07e20140: Len x804
4:38:28 AM #26 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No
4:38:28 AM #27 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 73340800
4:38:28 AM #28 Text 0 File CUDFTransferItem2.cpp, Line 660
GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 3983120
Session Start: Sector 0
Volume Structure: Sector [0, 271] (272 Sectors)
Before Meta Data: Sector [272, 287] (16 Sectors)
Meta Data: Sector [288, 319] (32 Sectors)
Data: Sector [320, 3982789] (3982470 Sectors)
After Data: Sector [3982790, 3982831] (42 Sectors)
Trailer Track: Sector [3982832, 3983119] (288 Sectors)
GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 01-25-2009 04:37:56
UDF Revision: 2.50
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 4173824
Multi Session Mode: Begin
Disc Type: DVD+R DL
OS Class: 5
Volume ID: Eden Lake
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 04959AE8
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 16
Sparing Packet Length: 16
Allocation Unit Size: 32
Alignment Unit Size: 16
Make Writable: 0
Access Type: Read-only
5:00:03 AM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 2154
Burning Layer 2
5:00:03 AM #30 Text 0 File DVDPlusDualLayer.cpp, Line 2163
Perform layer 1 to 2 jump before writing at address 2086912 (1FD800h)
5:00:39 AM #31 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 1F DF 60 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0b8b6c00: Len x10000
0xCC B7 D3 EB 6C 13 4A 7D BD 0F 8C 80 7A 9A 7C F2
0xFC 24 FB DB 88 24 31 A8 30 D8 9C 5D 61 76 86 51
0xA7 83 C7 A5 7D 47 67 B7 51 1E 44 59 CE C0 C2 54
5:00:39 AM #32 CDR -1135 File Writer.cpp, Line 306
Write error
D: _NEC DVD+-RW ND-6650A
5:00:40 AM #33 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
5:00:40 AM #34 Text 0 File DVDPlusRW.cpp, Line 943
EndDAO: Last written address 2088800
5:00:41 AM #35 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
5:00:42 AM #36 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2.4x (3,324 KB/s)
5:00:42 AM #37 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:00:45 AM #38 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
5:00:45 AM #39 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
