egor147
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by egor147
-
-
I've prepared an image with ImgBurn and just of curiosity compared two burned discs, one of which was burnt with ImgBurn, and the other - with Nero 6.6. The media, the burner, the reader and the DAO mode - they all were the same.
However, there is an exactly 2 seconds difference between two burnt discs. So I wonder if ImgBurn missed 2 seconds (leading gap?) or Nero wrote unnecessary data?
"ImgBurn 2.4.4.0, DAO"
PIONEER DVD-RW DVR-111D 1.29 (ATA)Current Profile: CD-ROM
Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 125
-
21:18:47 Destination Media Type: DVD-RW (Disc ID: RITEKW01) (Speeds: 2x) [...] 21:18:47 Write Speed: 4x
Or maybe try to set lower speed manually (1x-2x).
-
Seems to be a problem with DL media!
-
I 11:17:25 Destination Device: [2:0:0] PIONEER DVD-RW DVR-216D 1.09 (F:) (ATA)
I 11:17:25 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)
Try a different medium, obviously? E.g., Verbatim.
-
Thanks, I'll try to make a mega-master image of EnhancedCD
Woohoo, I've just made it!
Is anybody interested in the "EnhancedCD made easy" guide?
-
Look harder!
Tools -> Settings -> Build -> Advanced -> Image Start LBA.
Aha! That is in the Settings! I was looking only on the "frontal" settings
Thanks, I'll try to make a mega-master image of EnhancedCD
-
It only works if the ISO has been built for positioning at the exact LBA it'll end up being positioned at - i.e. all the fields in the file system must have the correct LBA offset.
So can this be done with ImgBurn? I can't find the option to specify LBA offset while building an image.
Is there other way to create EnhancedCD with ImgBurn?
2 sec difference between ImgBurn and Nero
in ImgBurn Support
Posted
The actual image size is (as reported by ImgBurn write dialogue):
Sectors: 125 312
Size: 256 638 976
Time: 27:52:62
So it goes, Nero writes zeroes at the end...