willryan42

No, but I'll email them now. Thanks for all the help!

Don't think it worked =/. On the bottom left of imgburn, when it's writing and tells you what it's doing, the first thing it used to say was setting l0 data capacity or something of that sort, then after 45-60 seconds, i got the error messages. Now the first thing is setting write parameters and then that's it. It's been counting up on the elapsed time clock for about 10 minutes with no sign of doing anything else

Any program running at the time I try to burn? Nothing that I know of, or at least nothing I chose to open.

Here's hardware>motherboard: Property Value South Bridge Intel 82801BA (ICH2) CPU Intel® Core2 Duo CPU T8300 @ 2.40GHz Cpu Socket Socket 775 LGA System Slots 1 ISA, 5 PCI Memory Summary Maximum Capacity 4096 MBytes Memory Slots 4 Error Correction None Warning! Accuracy of DMI data cannot be guaranteed And here's pci info (although I don't know if you wanted the detailed info from each row that shows when one row is selected): Bus/Dev./Func. Type Class Type Manufacturer Device Name Sub System Device Vendor Sub System Device Name 00 / 02 / 00 PCI VGA Controller 00 / 03 / 00 PCI PCI to Other Bridge 00 / 05 / 00 PCI Ethernet Realtek Semiconductor RT8029(AS) 10Mb Ethernet Adapter Realtek Semiconductor RT8029(AS) Ethernet Adapter 00 / 29 / 00 PCI USB (UHCI) Intel Corporation 82801FB (ICH6) USB UHCI Controller 1 Intel Corporation 00 / 29 / 07 PCI USB 2.0 (EHCI) Intel Corporation 82801FB (ICH6) USB 2.0 EHCI Controller Intel Corporation 00 / 30 / 00 AGP PCI to HOST Bridge Intel Corporation 815/EP/P Solano Host-Hub Interface Bridge (GMCH/MCH A2-step) Intel Corporation 82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub Bridge 00 / 31 / 00 PCI PCI to ISA Bridge Intel Corporation 82801BA (ICH2) LPC Interface Controller Intel Corporation 00 / 31 / 01 PCI Bus Master IDE controller Intel Corporation 82801BA (ICH2) UltraATA/100 IDE Controller Intel Corporation 82801BA (ICH2) UltraDMA/100 IDE Controller 00 / 31 / 05 PCI Audio Device Intel Corporation 801BA/BAM AC'97 Audio Controller (ICH2/ICH2-M B1/B1' steps)

Yes, no updates or anything different.

No such luck. The files copied and I changed interfaces successfully, but got the same burn errors.

Apparently that didn't work: W 04:39:21 I/O Interface has been changed! I 04:39:21 Shutting down SPTI... I 04:39:21 Initialising ASPI... E 04:39:21 Unable to initialise ASPI! - WNASPI32.DLL E 04:39:21 Reason: The specified module could not be found. E 04:39:21 You need to install an ASPI manager. E 04:39:21 Visit http://www.imgburn.com to download one. E 04:39:21 Alternatively, try changing the 'I/O Interface' in the Settings to a different one.

I run it through Parallels desktop, which yes, is an emulator. And I can't see this being a problem, because I've burned countless number of dual layers under parallels with this computer, then I stopped for a month or so and when i tried again, I'm greeted by this mess =/

No clue, I just know it's a macbook, early 2008. Not the aluminum unibody ones.

I 13:54:16 ImgBurn Version 2.4.2.0 started! I 13:54:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:54:16 Total Physical Memory: 523,828 KB - Available: 386,452 KB I 13:54:16 Initialising SPTI... I 13:54:16 Searching for SCSI / ATAPI devices... I 13:54:16 Found 1 DVD

Okay one second. And how do I post the full log? Am I missing some setting, because I'm copying everything from the log window.

Same thing happens with verbatim 2.4x discs! =/

Thanks for your help! I'm going to pick up a few verbatim's tomorrow and test it out. Dual layer disc's seem to be different than regular blank cd's and dvd's am I right? For example, with just cd-r's and dvd-r's, I can use any brand at all with no problems. But i obviously have problems with certain brands of DL discs. Normal?

Here's the log from the write mode with a new disc: HL-DT-ST DVDRW GSA-S10N BP10 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x DVD

heres the disc info: HL-DT-ST DVDRW GSA-S10N BP10 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Disc Control Blocks Information: HL-DT-ST GSA-S10N Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 and i dont know about the log, i copied everything that's there, unless theres some setting i need to change?

I've tried both 2.4 and 4x. Here's a log of when I just continue pass the errors: I 22:43:04 Operation Started! I 22:43:04 Source File: \\.PSF\.Home\Downloads\xxx-sto.iso I 22:43:04 Source File Sectors: 3,825,924 (MODE1/2048) I 22:43:04 Source File Size: 7,835,492,352 bytes I 22:43:04 Source File Volume Identifier: XGD2DVD_NTSC I 22:43:04 Source File Volume Set Identifier: 34672923 I 22:43:04 Source File Implementation Identifier: Sonic Scenarist 3.1 I 22:43:04 Source File File System(s): ISO9660, UDF (1.02) I 22:43:04 Destination Device: [0:1:0] HL-DT-ST DVDRW GSA-S10N BP10 (D:) (ATA) I 22:43:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 22:43:04 Destination Media Sectors: 4,173,824 I 22:43:04 Write Mode: DVD I 22:43:04 Write Type: DAO I 22:43:04 Write Speed: 2.4x I 22:43:04 Link Size: Auto I 22:43:04 Test Mode: No I 22:43:04 OPC: No I 22:43:04 BURN-Proof: Enabled I 22:43:04 Book Type Setting: N/A I 22:43:04 User Specified L0 Data Zone Capacity: 1,913,760 W 22:44:16 Failed to set L0 Data Zone Capacity! W 22:44:16 Reason: Medium Not Present I 22:44:27 Filling Buffer... (20 MB) I 22:44:28 Writing LeadIn... I 22:44:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 22:44:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 22:44:37 Writing Layer 0... (LBA: 0 - 2086911) I 22:45:29 Abort Request Acknowledged I 22:45:29 Synchronising Cache... W 22:45:32 User opted to skip the 'Close Track/Session/Disc' functions. E 22:45:32 Failed to Write Image! I 22:45:32 Exporting Graph Data... I 22:45:32 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRW_GSA-S10N_BP10_MONDAY-MARCH-16-2009_10-43_PM_RITEK-S04-66_2.4x.ibg I 22:45:32 Export Successfully Completed! E 22:45:32 Operation Aborted! - Duration: 00:02:27

You mean just click "continue"? I've tried that and then it burns, but then ends up not working just like the others. =/

So lately I've been using osx360 to burn my games. I haven't burned one in a couple weeks, but when I did it yesterday, it burned fine, but when i put it into my xbox, it doesn't play. No error message, just tries to read it, makes some weird noises and then goes to the dashboard. I also tried burning in iburn360 and the same noises happen and then to the dashboard. Then I went to imgburn. I've burned over 40 games with imgburn under parallels desktop without a hiccup, even though I've been using memorex dl discs. But this time, I get a few errors. First "failed to set L0 data zone capacity! reason: medium not present" then same L0 error with "reason: power on, reset, or bus device reset occurred" then "reason: invalid field in parameter list" I 22:23:20 Operation Started! I 22:23:20 Source File: \\.PSF\.Home\Downloads\xxx-sto.iso I 22:23:20 Source File Sectors: 3,825,924 (MODE1/2048) I 22:23:20 Source File Size: 7,835,492,352 bytes I 22:23:20 Source File Volume Identifier: XGD2DVD_NTSC I 22:23:20 Source File Volume Set Identifier: 34672923 I 22:23:20 Source File Implementation Identifier: Sonic Scenarist 3.1 I 22:23:20 Source File File System(s): ISO9660, UDF (1.02) I 22:23:20 Destination Device: [0:1:0] HL-DT-ST DVDRW GSA-S10N BP10 (D:) (ATA) I 22:23:20 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 22:23:20 Destination Media Sectors: 4,173,824 I 22:23:20 Write Mode: DVD I 22:23:20 Write Type: DAO I 22:23:20 Write Speed: 2.4x I 22:23:20 Link Size: Auto I 22:23:20 Test Mode: No I 22:23:20 OPC: No I 22:23:20 BURN-Proof: Enabled I 22:23:20 Book Type Setting: N/A I 22:23:20 User Specified L0 Data Zone Capacity: 1,913,760 E 22:32:04 Failed to set L0 Data Zone Capacity! E 22:32:04 Reason: Invalid Field in Parameter List E 22:32:04 Operation Failed! - Duration: 00:08:44 I 22:32:04 Average Write Rate: N/A - Maximum Write Rate: N/A Is it possible that I have some bad DL discs? I know everyone here is verbatim crazy, but I have a 50 pack of these memorex's and I've never had a problem with them before. Also, I have a toshiba laptop and the games burn fine in imgburn on there. Could it be something with my drive on the macbook? It's pretty new, and cd's and dvd's still burn fine, just trouble with DL's.