briareos_kerensky

Apparently limiting speed to 12x made things work again. Thanks for the suggestions. First thing I did after assembling the hardware Of course. Nope, but I only use Verbatim discs. I have 20 or so -R DVDs to burn through before replenishing stocks. This is something I will never do when all the HDDs I have connected to the controller benefit of SATA advanced features.

Hello everyone, I have stumbled over a strange error I cannot correct. I have built a new i7 system based on a Gigabyte X58-UD5 motherboard and two Pioneer DR-216D burners connected to channel 4 and 5 of the ICH10 controller; said controller is set to AHCI. The motherboard comes with a secondary SATA controller, set to IDE. The system is three months old and I have already successfully burned some DVDs and a few CDs with Imgburn, but it has been a week or so that Imgburn no longer writes data on the optical media after writing the lead in; I've tried to connect one burner to the secondary SATA controller, but I get the same error. Now, before posting this message I gave it a last try and instead of starting Imgburn and inserting a blank DVD into the tray, I first put the DVD into the tray and started Imgburn....at it worked! The DVD has been successfully wrote, so I went to write an other DVD but I got the same error. Here's the log: I 21:29:46 ImgBurn Version 2.4.4.0 started!I 21:29:46 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 21:29:46 Total Physical Memory: 6.287.952 KB - Available: 4.579.424 KB I 21:29:46 Initialising SPTI... I 21:29:46 Searching for SCSI / ATAPI devices... I 21:30:08 Found 2 DVD