Amandyke

Completely forgot to check this thread again. Optical drive is NOT in raid mode. Motherboard is NOT new, this worked just fine in Vista before I upgraded to Win7. Upgraded drivers for Win7 do NOT stop this behavior from happening. However it is a Jmicron chip. The DVD drive is 2 years old. I'd happily switch to a SATA drive if you happen to know of one that automatically bitsets all discs to DVD-ROM like the DVR-111D.

Do you have any explanation as to what might be going on as to cause this? Or is this how you typically handle bug reports. Here's a log from right now and a fresh disc: I 07:40:18 ImgBurn Version 2.5.0.0 started! I 07:40:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 07:40:18 Total Physical Memory: 8,386,872 KB - Available: 6,812,748 KB W 07:40:18 SPTD can have a detrimental effect on drive performance. I 07:40:18 Initialising SPTI... I 07:40:18 Searching for SCSI / ATAPI devices... I 07:40:29 Found 1 DVD�RW and 1 BD-ROM/HD DVD-ROM! I 07:40:37 Operation Started! I 07:40:37 Source File: H:\************* I 07:40:37 Source File Sectors: 3,825,924 (MODE1/2048) I 07:40:37 Source File Size: 7,835,492,352 bytes I 07:40:37 Source File Volume Identifier: ********* I 07:40:37 Source File Volume Set Identifier: 34672923 I 07:40:37 Source File Implementation Identifier: Sonic Scenarist 3.1 I 07:40:37 Source File File System(s): ISO9660, UDF (1.02) I 07:40:37 Destination Device: [4:0:0] PIONEER DVD-RW DVR-111D 1.29 (I:) (RAID) I 07:40:37 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x) I 07:40:37 Destination Media Sectors: 4,173,824 I 07:40:37 Write Mode: DVD I 07:40:37 Write Type: DAO I 07:40:37 Write Speed: MAX I 07:40:37 Link Size: Auto I 07:40:37 Lock Volume: Yes I 07:40:37 Test Mode: No I 07:40:37 OPC: No I 07:40:37 BURN-Proof: Enabled I 07:40:37 Advanced Settings - Optimal Writing Speed: No I 07:40:37 Optimal L0 Data Zone Capacity: 1,913,760 I 07:40:37 Optimal L0 Data Zone Method: Copied From Original Disc

Ever since I upgraded to Windows 7 Ultimate I've been having this issue. When I go to burn a DL ISO imgburn will hang while attempting to set the l0 data zone. It doesn't fail, it just sits there not doing anything. I'll try to abort and it wont work, the only thing I can do is reboot. At which time I attempt the burn again and it works just fine. It does this with every single disc and ISO I've thrown at it since Win7. Worked just fine in Vista. Once the disc's burn they work just fine. Never had a burn fail or a disc not work. Rather annoying, hoping someone has either seen this and found a fix, or the Dev's can find a way to address the issue. There is nothing in the logs of interest. Burner: Pioneer DVR-111D OS: Win7 64-bit Ultimate RTM