jaymac

October 28, 2007

This is a fairly recent event .Dont understand the drive being at fault when decrypt works ok? also aborting while it says write leadin has'nt resulted in coasters as yet. Time wise too long is longer than I care to wait next time I'll time it .Decrypt takes about a minute to leadin.I've been using Imgburn for well over a year now and this only recent

October 28, 2007

Hi now this may well be my impatience but on the last 2 or 3 times when trying to burn form Iso file the time taken to write leadin seems to be taking too long (compared to decrypt). Not wishing to make a coaster I click abort am asked if Im sure i confirm . Imgburn then seems to hang or at least take too long to shut down.Put the samr file in dectypt and its done and dusted in no time.Anything apart from impatience that might be wrong.

October 5, 2006

I have read the faq that says decrypter has to be installed but having just had to reinstall evrthing I find so far decrypt is no longer avaiable .Is there any other way to get shrink to select imgburn automatically

August 18, 2006

Hi all the footage was in the same analogue format 4:3 via the same camcorder no problem recording (Panasonic) whatsoever only prob was copying the master disc. Fortunately havent too many to do so the shrink workaround will suffice

Thanks for the points

August 18, 2006

Well I (we) can't comment on your stuff with DVD Dec.

If the source files are ok (or source image), the burnt disc should be fine too.

Thanks but it looks as if it may well be the source which is VHS footage recorded on dvd recorder >That all works fine but when I try to duplicate the disc the copies wont play on the dvd player.unless I go through shrink instead of decrypt. Just all this coincided with the upgrade but obviously now it has nowt to do with that.Thanks for your attention. Is IMGburn ever going to Read to save using decrypt?

August 17, 2006

Didn't you just say you'd done the original again with DVD Shrink and burnt it with ImgBurn.... and that plays ok? If so, I'm not sure I understand what the problem is now exactly.

Yes it was ok after going through shrink but I never had to do that before.If I had a dvd that did not require shrinking and was not encrypted I just used decrypt to read and imgburn to burn . For some reason now that produces dvd's that wont play on my dvd player.Ok I have a workaround by using shrink but curious why rhis has suddenly happened

August 17, 2006

Yes it supports -RW the I always have any dvd disabled and these are not encrypted discs

August 17, 2006

Thanks no change in the discs the ones that failed to play in the standalone were Read in Decrypt and burnt with Img. I have just ran the original through Shrink and burnt the cpy with Img and it plays ok on the standalone. Have attached the log of the one that failed

I 17:56:41 ImgBurn Version 2.0.0.0 started!

I 17:56:41 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

W 17:56:41 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 17:56:41 Initialising SPTI...

I 17:56:41 Searching for SCSI / ATAPI devices...

I 17:56:41 Found 1 DVD?RW!

I 17:57:35 Operation Started!

I 17:57:35 Source File: E:\DVD_VIDEO_RECORDER.ISO

I 17:57:35 Source File Sectors: 1,975,018 (MODE1/2048)

I 17:57:35 Source File Size: 4,044,836,864 bytes

I 17:57:35 Source File Volume Identifier: DVD_VIDEO_RECORDER

I 17:57:35 Source File Implementation Identifier: DVD Shrink

I 17:57:35 Source File File System(s): ISO9660, UDF (1.02)

I 17:57:35 Destination Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.88 (D:) (ATA)

I 17:57:35 Destination Media Type: DVD-RW (Disc ID: MCC 01RW4X) (Speeds: 2x, 4x)

I 17:57:35 Destination Media Sectors: 2,298,496

I 17:57:35 Write Mode: DVD

I 17:57:35 Write Type: DAO

I 17:57:35 Write Speed: MAX

I 17:57:35 Link Size: Auto

I 17:57:35 Test Mode: No

I 17:57:35 BURN-Proof: Enabled

I 17:57:36 Filling Buffer...

I 17:57:36 Writing LeadIn...

I 17:58:13 Writing Image...

I 18:09:59 Synchronising Cache...

I 18:10:18 Image MD5: 34fa7adaee3b2731f7bf595142ac1dd6

I 18:10:18 Operation Successfully Completed! - Duration: 00:12:43

I 18:10:18 Average Write Rate: 5,602 KB/s (4.0x) - Maximum Write Rate: 5,750 KB/s (4.2x)

August 17, 2006

Have you retried some of the discs you burnt with the older imgburn to verify if you dvd player is still working.

Oh yes

August 17, 2006

Have used Imgburn for a year now with no problems bur coinciding with the recent update my discs no longer play on my standalone player. It just goes from loading to Stop. Play ok on pc

April 25, 2006

any way to burn more than one video to dvd? i have dvd shrink to compress my movies and use img burn to write to blank dvd. is there a way to put , say more than one movie on a blank dvd? or even short runned cartoons per say?
thanks for any advice

In shrink open both files go to reauthor and drag the first lot of files or movie click on start end and click ok then do the same with the second file then do back up. might not be word perfect worked puting two seperate dvd's onto one

April 19, 2006

A simple question from one who (thanks to this forum) has just managed his first DL burn You are creating an MDS file ie it is ticked in the preference in decrypt?

April 19, 2006

Ok guys thanks to everyone tried and succesfully burned a verbatim+r DL without a hitch. Also plays ok in my -R player

April 18, 2006

Thanks will that enable my player which only plays dvd- to play a+

9 times out 10, yes.

Thanks kenadjian also Thanks Chewy I did that update to 2.88 and it accepted the disc started to burn then failed which is a step further than before. Got some Verbatims on order.Cheers Jaymac

April 15, 2006

And don't forget to set the "book type" to DVD ROM on the +DL media.

Thanks will that enable my player which only plays dvd- to play a+

April 15, 2006

Thanks guys will try that Cornholio7 do you use - 0r + or matters it not

April 15, 2006

On my first attempt at burning to dual layer getting the following failure I'm pretty sure my burner will do DL I'v never had any problems burning D5's. and not exactly an expert inthis field thanks for any advice

I 14:03:31 ImgBurn Version 1.3.0.0 started!

I 14:03:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 14:03:31 Initialising SPTI...

I 14:03:31 Searching for SCSI / ATAPI devices...

I 14:03:31 Found 1 DVD?RW!

I 14:07:33 Operation Started!

I 14:07:33 Source File: C:\UK_110267.MDS

I 14:07:33 Source File Sectors: 3,923,998 (MODE1/2048)

I 14:07:33 Source File Size: 8,036,347,904 bytes

I 14:07:33 Source File Volume Identifier: UK_110267

I 14:07:33 Source File Implementation Identifier: Spruce Technologies

I 14:07:33 Source File UDF Revision: 1.02

I 14:07:33 Destination Device: [1:0:0] _NEC DVD_RW ND-3500AG 2.86 (D:) (ATA)

I 14:07:33 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01)

I 14:07:33 Destination Media Sectors: 3,949,856

I 14:07:33 Write Mode: DVD

I 14:07:33 Write Type: DAO

I 14:07:33 Write Speed: MAX

I 14:07:33 Link Size: Auto

I 14:07:33 Test Mode: No

I 14:07:33 BURN-Proof: Enabled

I 14:07:33 Optimal L0 Data Zone Capacity: 1,974,928

I 14:07:33 Optimal L0 Data Zone Method: Copied From Original Disc

I 14:07:42 Filling Buffer...

I 14:07:44 Writing LeadIn...

W 14:07:44 Failed to Write Sectors 0 - 31 - Cannot Write Medium - Incompatible Format

W 14:07:44 Retrying (1 of 20)...