Hi all,
was happly burning ISO's this morning until I began to get the following error
I 16:45:05 ImgBurn Version 2.5.0.0 started!
I 16:45:05 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)
I 16:45:05 Total Physical Memory: 4,192,320 KB - Available: 2,459,252 KB
I 16:45:05 Initialising SPTI...
I 16:45:05 Searching for SCSI / ATAPI devices...
I 16:45:05 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE!
I 16:45:31 Operation Started!
I 16:45:31 Source File: D:\*****.iso
I 16:45:31 Source File Sectors: 2,294,912 (MODE1/2048)
I 16:45:31 Source File Size: 4,699,979,776 bytes
I 16:45:31 Source File Volume Identifier: **********
I 16:45:31 Source File File System(s): Special
I 16:45:31 Destination Device: [0:0:0] MATSHITA BD-RE UJ-220 1.00 (E:) (ATA)
I 16:45:31 Destination Media Type: DVD-R (Disc ID: TTH02) (Speeds: 2x, 4x, 6x, 8x)
I 16:45:31 Destination Media Sectors: 2,298,496
I 16:45:31 Write Mode: DVD
I 16:45:31 Write Type: DAO
I 16:45:31 Write Speed: MAX
I 16:45:31 Link Size: Auto
I 16:45:31 Lock Volume: Yes
I 16:45:31 Test Mode: No
I 16:45:31 OPC: No
I 16:45:31 BURN-Proof: Enabled
I 16:45:32 Filling Buffer... (40 MB)
I 16:45:33 Writing LeadIn...
W 16:45:39 Failed to Write Sectors 3712 - 3743 - Reason: Power Calibration Area Error
W 16:45:39 Retrying (1 of 20)...
W 16:45:39 Retry Failed - Reason: Power Calibration Area Error
W 16:45:39 Retrying (2 of 20)...
W 16:45:39 Retry Failed - Reason: Power Calibration Area Error
I've tried looking for Firmware update but the only one i could find was not for my hardware and as i was burning one minute and then not the next i doubt it is firmware.
I'm running a DELL XPS 1730 if that is of any help and the DVD's I am using are TDK DVD-R.
Checked device manager and it believes the burner is working fine (not that I trust the device manager).
Hope you can point me in the right direction.
Thanx
