Hi all,
I just attached my SONY DVD RW DRU-800A KY06 (E:) (ATA), but getting only faillures right at the beginning of the burn process(using Verbatim +R DL 8x). I updated my firmware and my bios sees the Sony DRU burner as IDE..
This is the error message from imgburn:
ImgBurn
---------------------------
I/O Error!
Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA)
ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 2A 00 00 00 31 00 00 00 20 00
Interpretation: Write (10) - Sectors: 12544 - 12575
Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00
Interpretation: Invalid Address For Write
---------------------------
Retry Cancel
----------
It seems that the burn-speed doesnt even get to 2.4x speed.. it goes till somewhere between 1.2 - 1.5x and then it stoppes and i get this errorpopup.
Plss help me out, i toasted 5 DL's already. If this keeps up, i am broke be4 tomorrow
Thanks in advance!!
ps. i use 'Sectors in L0' user specified nr: 1913760
ps2. dont know if it contains any usefull info, but to be sure i'll attach the following:
------------
SONY DVD RW DRU-800A KY06 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 3,827,520
Free Space: 7,838,760,960 bytes
Free Time: 850:35:45 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 2.4x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 1,913,760
Changeable: No
Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,110,367
Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,110,367
Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 0 (0x00000000)
-> RS: 3,324 KB/s (2.4x) - WS: 3,324 KB/s (2.4x)
-------
; //****************************************\\
; ImgBurn Version 2.5.1.0 - Log
; Wednesday, 31 March 2010, 16:55:17
; \\****************************************//
;
;
I 16:19:28 ImgBurn Version 2.5.1.0 started!
I 16:19:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 16:19:28 Total Physical Memory: 3,406,892 KB - Available: 2,733,932 KB
W 16:19:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 16:19:28 Initialising SPTI...
I 16:19:28 Searching for SCSI / ATAPI devices...
I 16:19:28 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA)
I 16:19:28 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA)
I 16:19:28 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI)
I 16:19:28 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!
I 16:21:46 Operation Started!
I 16:21:46 Source File: C:\Documents and Settings\Paul\Desktop\fable2backup.dvd
I 16:21:46 Source File Sectors: 3,825,924 (MODE1/2048)
I 16:21:46 Source File Size: 7,835,492,352 bytes
I 16:21:46 Source File Volume Identifier: XGD2DVD_NTSC
I 16:21:46 Source File Volume Set Identifier: 34672923
I 16:21:46 Source File Implementation Identifier: Sonic Scenarist 3.1
I 16:21:46 Source File File System(s): ISO9660, UDF (1.02)
I 16:21:46 Destination Device: [1:0:0] SONY DVD RW DRU-800A KY06 (E:) (ATA)
I 16:21:46 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x)
I 16:21:46 Destination Media Sectors: 4,173,824
I 16:21:46 Write Mode: DVD
I 16:21:46 Write Type: DAO
I 16:21:46 Write Speed: 2.4x
I 16:21:46 Link Size: Auto
I 16:21:46 Lock Volume: Yes
I 16:21:46 Test Mode: No
I 16:21:46 OPC: No
I 16:21:46 BURN-Proof: Enabled
I 16:21:46 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 16:21:46 User Specified L0 Data Zone Capacity: 1,913,760
I 16:22:17 Set L0 Data Zone Capacity Succeeded!
I 16:22:17 Filling Buffer... (40 MB)
I 16:22:18 Writing LeadIn...
I 16:22:38 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 16:22:38 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 16:22:38 Writing Layer 0... (LBA: 0 - 1913759)
W 16:22:52 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write
W 16:22:52 Retrying (1 of 20)...
W 16:22:52 Retry Failed - Reason: Invalid Address For Write
W 16:22:52 Retrying (2 of 20)...
W 16:22:52 Retry Failed - Reason: Invalid Address For Write
W 16:22:52 Retrying (3 of 20)...
W 16:22:52 Retry Failed - Reason: Invalid Address For Write
W 16:22:52 Retrying (4 of 20)...
W 16:22:52 Retry Failed - Reason: Invalid Address For Write
W 16:22:52 Retrying (5 of 20)...
W 16:26:55 Retry Failed - Reason: Invalid Address For Write
E 16:32:08 Failed to Write Sectors 12544 - 12575 - Reason: Invalid Address For Write
E 16:32:08 Next Writable Address: 0
I 16:32:08 Synchronising Cache...
W 16:32:25 User opted to skip the 'Close Track/Session/Disc' functions.
E 16:32:25 Failed to Write Image!
I 16:32:25 Exporting Graph Data...
I 16:32:25 Graph Data File: C:\Documents and Settings\Paul\Application Data\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-800A_KY06_WEDNESDAY-MARCH-31-2010_4-21_PM_MKM-003-00_2.4x.ibg
I 16:32:25 Export Successfully Completed!
E 16:32:25 Operation Failed! - Duration: 00:10:39
I 16:32:25 Average Write Rate: 44 KB/s (0.0x) - Maximum Write Rate: 3,334 KB/s (2.4x)
I 16:55:17 Close Request Acknowledged
;
;
; //****************************************\\
; ImgBurn Version 2.5.1.0 - Log
; Wednesday, 31 March 2010, 16:16:20
; \\****************************************//
;
;
I 16:16:16 ImgBurn Version 2.5.1.0 started!
I 16:16:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 16:16:16 Total Physical Memory: 3,406,892 KB - Available: 2,740,228 KB
W 16:16:16 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 16:16:16 Initialising SPTI...
I 16:16:16 Searching for SCSI / ATAPI devices...
I 16:16:16 -> Drive 1 - Info: SONY DVD RW DRU-800A KY06 (E:) (ATA)
I 16:16:16 -> Drive 2 - Info: TSSTcorp DVD+-RW TS-H653A D300 (I:) (ATA)
I 16:16:16 -> Drive 3 - Info: NQDE DIB4PQ7K5 1.03 (J:) (SCSI)
I 16:16:16 Found 2 DVD±RWs and 1 BD-ROM/HD DVD-ROM!
I 16:16:20 Close Request Acknowledged
I 16:16:20 Closing Down...
I 16:16:20 Shutting down SPTI...
I 16:16:20 ImgBurn closed!