Ashutosh Rathore
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Ashutosh Rathore
-
-
Have you tried replacing the cable for a decent new 80 wire one? If not, do so.
If you only have 1 drive (the burner) on the cable, make sure you configure the jumpers to 'Master' on the back of the drive. You want the motherboard connected at one end of the cable and the drive at the opposite end - leaving one blank connector in the middle.
I think my cable is 80 with lots of wire...
And its also new...
The jumpers are set to master..
-
Sorry for the late reply..
Well this week i tried my luck and on my own risks do these things:
1. Checked the tape like belt connected with CD ROM and mother board..
2. Checked the jumpers situated at the CD ROM drive...the jumper was at the middle i shifted it to the right most..
But these thing doesnt solve my problem before doing these thing I burned a image in safemode
THe following was the log:
I 16:30:11 ImgBurn Version 2.5.5.0 started! I 16:30:11 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:30:11 Total Physical Memory: 1,039,668 KB - Available: 607,852 KB I 16:30:11 Initialising SPTI... I 16:30:11 Searching for SCSI / ATAPI devices... I 16:30:11 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 16:30:11 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown) I 16:30:11 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:30:28 Operation Started! I 16:30:28 Source File: C:\Documents and Settings\Ashutosh Rathore\My Documents\Downloads\Compressed\HDLOADER8C.cue I 16:30:28 Source File Sectors: 13,127 (MODE2/FORM1/2352) I 16:30:28 Source File Size: 30,874,704 bytes I 16:30:28 Source File Volume Identifier: MODE2CD I 16:30:28 Source File File System(s): ISO9660 I 16:30:28 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 16:30:28 Destination Media Type: CD-R (Disc ID: 97m27s18f, Plasmon Data Systems) (Speeds: 16x, 24x, 40x, 48x) I 16:30:28 Destination Media Sectors: 359,847 I 16:30:28 Write Mode: CD I 16:30:28 Write Type: SAO I 16:30:28 Write Speed: 2x I 16:30:28 Lock Volume: Yes I 16:30:28 Test Mode: Yes I 16:30:28 OPC: No I 16:30:28 BURN-Proof: Enabled W 16:30:28 Write Speed Miscompare! - Wanted: 353 KB/s (2x), Got: 2,822 KB/s (16x) I 16:30:28 Filling Buffer... (40 MB) I 16:30:28 Writing LeadIn... W 16:30:58 Failed to Write Sectors -42 - -16 - Reason: Timeout on Logical Unit W 16:30:58 Retrying (1 of 20)... I 16:30:58 Writing LeadIn... W 16:30:58 Failed to Write Sectors -15 - -1 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (1 of 20)... I 16:30:58 Writing LeadIn... W 16:30:58 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (1 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (2 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (3 of 20)... W 16:30:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:30:58 Retrying (4 of 20)... W 16:31:28 Retry Failed - Reason: Timeout on Logical Unit W 16:31:28 Retrying (5 of 20)... W 16:31:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:28 Retrying (6 of 20)... W 16:31:58 Retry Failed - Reason: Timeout on Logical Unit W 16:31:58 Retrying (7 of 20)... W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:58 Retrying (8 of 20)... W 16:31:58 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:31:58 Retrying (9 of 20)... W 16:32:28 Retry Failed - Reason: Timeout on Logical Unit W 16:32:28 Retrying (10 of 20)... W 16:32:28 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:32:28 Retrying (11 of 20)... W 16:33:10 Retry Failed - Reason: Timeout on Logical Unit W 16:33:10 Retrying (12 of 20)... W 16:33:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:33:10 Retrying (13 of 20)... W 16:33:40 Retry Failed - Reason: Timeout on Logical Unit W 16:33:40 Retrying (14 of 20)... W 16:33:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:33:40 Retrying (15 of 20)... W 16:34:10 Retry Failed - Reason: Timeout on Logical Unit W 16:34:10 Retrying (16 of 20)... W 16:34:10 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:10 Retrying (17 of 20)... W 16:34:40 Retry Failed - Reason: Timeout on Logical Unit W 16:34:40 Retrying (18 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:40 Retrying (19 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:34:40 Retrying (20 of 20)... W 16:34:40 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:14 Retrying (21)... W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:14 Retrying (22)... W 16:36:14 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 16:36:15 Retrying (23)... W 16:36:15 Retry Failed - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) E 16:36:17 Failed to Write Sectors 0 - 26 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) I 16:36:17 Synchronising Cache... W 16:36:18 Potential 'WaitImmediateIO' Deferred Error - (1/3) - Track Following Error W 16:36:18 Synchronise Cache Failed! - Reason: Track Following Error W 16:36:18 Retrying (1 of 3)... W 16:36:21 User opted to skip the 'Close Track/Session/Disc' functions. E 16:36:21 Failed to Write Image! E 16:36:29 Operation Failed! - Duration: 00:05:53 I 16:36:29 Average Write Rate: N/A - Maximum Write Rate: N/A
-
Okay i will do it and post the log here...
-
All drivers are current...but I said previously not all drivers are digitally signed as drivers related to IDE are not digitally signed.
-
SIW Report:
Property Value ASHU (Kobian PI945GCM) Summary Manufacturer Kobian Model PI945GCM Version ECS Serial Number [unknown] Bridge North Bridge Intel i945G Revision A2 South Bridge Intel 82801GB (ICH7/R) Revision A1 CPU Name Intel(R) Celeron(R) CPU 420 @ 1.60GHz Cpu Socket Socket 775 LGA Max CPU Speed 1600 MHz Memory Maximum Capacity 4096 MBytes Maximum Memory Module Size 4096 MBytes Memory Slots 4 Memory Type DDR2 System Slots ISA 0 PCI 0 AGP 0 VL-BUS 0 EISA 0 PCMCIA 0 ExpressCard 0 MCA 0
All drivers are current...but most of 'em are not digitally signed
-
Well I do that but i am not getting how to solve it.In many posts you have said that check the cable,check whether the drive is set on master etc etc..frankly speaking I did not know how to check these...
-
Okay!! How will i resolve this problem...I have seen all the previous posts related to this problem but am not getting to to resolve it.SO please help me out.
-
ImgBurn is a nice app no doubt I'd burned more than 100 DVDs and CDs with it,but recently it started to show some freaky error maybe this error occurred after I reformatted my system...This error shook me up!!
I tried to burn DVDs below 24x but that didn't solve my problem.I also tried to burn DVDs and CDs on 1x,2x,2.4x,5x but all was waste.Now I am very frustrated God damn someone help me out :0
Heres a log of Imgburn during the burning process..
I 18:18:54 Initialising SPTI... I 18:18:54 Searching for SCSI / ATAPI devices... I 18:18:54 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 18:18:54 Found 1 DVD±RW/RAM! I 18:19:27 Operation Started! I 18:19:27 Source File: C:\Documents and Settings\Ashutosh Rathore\Desktop\PES2011.ISO I 18:19:27 Source File Sectors: 1,152,512 (MODE1/2048) I 18:19:27 Source File Size: 2,360,344,576 bytes I 18:19:27 Source File Volume Identifier: PES2011 I 18:19:27 Source File Volume Set Identifier: 5>=:?2=3SCEI I 18:19:27 Source File Application Identifier: PLAYSTATION I 18:19:27 Source File Implementation Identifier: DVD-ROM GENERATOR I 18:19:27 Source File File System(s): ISO9660, UDF (1.02) I 18:19:27 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22NP20 1.02 (F:) (ATA) I 18:19:27 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) (Speeds: 4x, 8x, 12x, 16x) I 18:19:27 Destination Media Sectors: 2,297,888 I 18:19:27 Write Mode: DVD I 18:19:27 Write Type: DAO I 18:19:27 Write Speed: MAX I 18:19:27 Link Size: Auto I 18:19:27 Lock Volume: Yes I 18:19:27 Test Mode: No I 18:19:27 OPC: No I 18:19:27 BURN-Proof: Enabled I 18:19:27 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 18:19:27 Filling Buffer... (40 MB) I 18:19:38 Writing LeadIn... W 18:19:50 Failed to Write Sectors 0 - 31 - Reason: Logical Unit Communication CRC Error (ULTRA-DMA/32) W 18:19:50 Retrying (1 of 20)... I 18:19:59 Abort Request Acknowledged
Logical Unit Communication CRC Error!
in ImgBurn Support
Posted
Okay..
Yes only one drive My CD\DVD rom..