I 21:44:01 ImgBurn Version 2.5.6.0 started!
I 21:44:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 21:44:01 Total Physical Memory: 1,039,856 KB - Available: 396,628 KB
I 21:44:01 Initialising SPTI...
I 21:44:01 Searching for SCSI / ATAPI devices...
I 21:44:01 -> Drive 1 - Info: ASUS CRW-4832AS 0.67 (E:) (ATA)
I 21:44:01 -> Drive 2 - Info: LITE-ON DVD+RW SOHW-822S VPPE (D:) (ATA)
I 21:44:02 -> Drive 3 - Info: HP DVD Writer 1270e HH22 (H:) (USB)
I 21:44:02 Found 1 CD-RW, 1 DVD+RW and 1 DVD±RW/RAM!
I 21:44:38 Operation Started!
I 21:44:38 Source File: C:\Documents and Settings\Jason.JASON-YX073ZJUY\Desktop\INSANITY.ISO
I 21:44:38 Source File Sectors: 1,790,400 (MODE1/2048)
I 21:44:38 Source File Size: 3,666,739,200 bytes
I 21:44:38 Source File Volume Identifier: INSANITY
I 21:44:38 Source File Volume Set Identifier: 3B2BA4E0C4D45B1F
I 21:44:38 Source File Application Identifier: NERO BURNING ROM
I 21:44:38 Source File Implementation Identifier: Nero
I 21:44:38 Source File File System(s): ISO9660, UDF (1.02)
I 21:44:38 Destination Device: [0:0:0] HP DVD Writer 1270e HH22 (H:) (USB)
I 21:44:38 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00)
I 21:44:38 Destination Media Supported Write Speeds: 6x, 8x, 12x, 16x
I 21:44:38 Destination Media Sectors: 2,295,104
I 21:44:38 Write Mode: DVD
I 21:44:38 Write Type: DAO
I 21:44:38 Write Speed: 8x
I 21:44:38 DVD+R Reserve Track: No
I 21:44:38 Link Size: Auto
I 21:44:38 Lock Volume: Yes
I 21:44:38 Test Mode: No
I 21:44:38 OPC: No
I 21:44:38 BURN-Proof: Enabled
I 21:44:38 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)
I 21:44:38 Filling Buffer... (40 MB)
I 21:44:39 Writing LeadIn...
I 21:44:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 1790399)
I 21:44:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1790399)
I 22:52:07 Synchronising Cache...
I 22:52:24 Closing Track...
I 22:52:25 Finalising Disc...
I 22:52:38 Exporting Graph Data...
I 22:52:38 Graph Data File: C:\Documents and Settings\Jason.JASON-YX073ZJUY\Application Data\ImgBurn\Graph Data Files\HP_DVD_Writer_1270e_HH22_THURSDAY-NOVEMBER-03-2011_9-44_PM_CMC_MAG-M01-00_8x.ibg
I 22:52:38 Export Successfully Completed!
I 22:52:38 Operation Successfully Completed! - Duration: 01:08:00
I 22:52:38 Average Write Rate: 888 KB/s (0.6x) - Maximum Write Rate: 945 KB/s (0.7x)
I 17:10:08 Close Request Acknowledged
I 17:10:08 Closing Down...
I 17:10:08 Shutting down SPTI...
I 17:10:09 ImgBurn closed!
OK so I have never had a problem with IMGburn before, I've burned TON'S of iso's and avchd files and burning speed has ALWAYS been great. Recently my computer had some issues and I had to do a system recovery install but never lost any data. So, I had to reinstall IMGburn and I thought everything would be cool, well NOW it only burns iso's at 0.7x and mp3 cd's at 2.0x.
Before joining I wanted to be sure I looked through the forum for an answer but all I have found are the following reasons:
Drive not DMA (spent about an hour and a half reconfiguring DMA because of a known issue that Windows XP will say it's DMA but really stays at PIO, anyway this is not the problem, I made sure BIOS showed DMA also.)
USB 1.0: While it is true that I DO NOT have a usb 2.0 device, I have NEVER had one and so why was IMGburn burning aqt perfect speeds previously? I find it hard to believe that it would just decide to stop working, so I know this can't be the issue)
DVD medium: Using same DVD's I've always used, never had a problem
HERE's WHAT I THINK:
In looking at the log above I see these lines:
21:44:38 Source File Volume Set Identifier: 3B2BA4E0C4D45B1F
I 21:44:38 Source File Application Identifier: NERO BURNING ROM
I 21:44:38 Source File Implementation Identifier: Nero
The problem with these lines is that I DO NOT have NERO installed on my computer, but I USED to have it installed (but due to issues I previously mentioned I had to do a system recovery and though I didn't lose any data all my files of previously installed programs remained though they weren't installed just like IMGburn, though I chose to delete my previous files of IMGburn and just went ahead and installed the newest version from your site)
So, I hope I'm making some sense here. I just don't really know what's going on and I have used IMGburn for a long time with NO issues so I know my computer and drives are capable of working well with IMGburn but I think somehow some registry problems occured and I don't know what to do to fix them (Why does it say NERO? I haven't even installed it again), so if you can help me figure this out it would be GREAT, if not thanks anyway because I do appreciate your time and know your busy.