Jump to content

Tiger

Members
  • Posts

    85
  • Joined

  • Last visited

Profile Information

  • Gender
    Male

Tiger's Achievements

ISF Member

ISF Member (2/5)

  1. Hello friends Please find the log enclosed. It is failing at the begining. The Blank media remaining untouched. I have updated the Firmware to the latest version from LG website. I am using Windows XP Pro with SP3. I 17:39:26 ImgBurn Version 2.5.7.0 started! I 17:39:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 17:39:26 Total Physical Memory: 2,358,184 KB - Available: 1,792,388 KB I 17:39:26 Initialising SPTI... I 17:39:27 Searching for SCSI / ATAPI devices... I 17:39:27 -> Drive 1 - Info: HL-DT-ST DVDRAM GH24NS72 WM01-01 (G:) (ATA) I 17:39:28 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (H:) (Unknown) I 17:39:28 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 17:39:49 Operation Started! I 17:39:49 Source File: E:\E.MDS I 17:39:49 Source File Sectors: 4,148,928 (MODE1/2048) I 17:39:49 Source File Size: 8,497,004,544 bytes I 17:39:49 Source File Volume Identifier: Home Video 2 I 17:39:49 Source File Volume Set Identifier: 417474AD003F4EB1 I 17:39:49 Source File Application Identifier: IMGBURN V2.5.7.0 - THE ULTIMATE IMAGE BURNER! I 17:39:49 Source File Implementation Identifier: ImgBurn I 17:39:49 Source File File System(s): ISO9660, UDF (1.02) I 17:39:49 Destination Device: [1:1:0] HL-DT-ST DVDRAM GH24NS72 WM01 (G:) (ATA) I 17:39:49 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R12-00) I 17:39:49 Destination Media Supported Write Speeds: 2.4x, 4x, 8x I 17:39:49 Destination Media Sectors: 4,173,824 I 17:39:49 Write Mode: DVD I 17:39:49 Write Type: DAO I 17:39:49 Write Speed: 4x I 17:39:49 DVD+R DL Reserve Track: No I 17:39:49 Link Size: Auto I 17:39:49 Lock Volume: Yes I 17:39:49 Test Mode: No I 17:39:49 OPC: No I 17:39:49 BURN-Proof: Enabled I 17:39:50 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:39:50 Book Type Setting: DVD-ROM I 17:39:50 Optimal L0 Data Zone Capacity: 2,074,464 I 17:39:50 Optimal L0 Data Zone Method: Copied From Original Disc E 17:40:16 Failed to check for ImgBurn update! W 17:40:40 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure E 17:40:47 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure E 17:40:47 Operation Failed! - Duration: 00:00:58 I 17:40:47 Average Write Rate: N/A - Maximum Write Rate: N/A Please help. Thank you.
  2. Thank you... Here are the snapshots of graph data files:
  3. I am sorry, I found this graph file being the first one in the GraphData folder, and I thought this must be the corresponding burn log. I thougt Imgburn automatically saves the Graph Data file I have changed it to incremental, because, Lightning_UK once advised me to do so because all the discs burnt with ImgBurn was failing Data Verification whereas Nero did not have any trouble whatsoever. Is it possible to get the graph data of the above burn anyway? Then I shall be happy to post it here if that helps. Now, I have tried to burn again another Folder in Build+Burn mode, and following is the log:
  4. Oh sorry, when I made this thread, the burning was still underway. Please find the log as follows:
  5. Hello I am using ASUS ASUS DRW 2014L1T burner and authentic Mitsubishi media made by MCC. Why do I get this error: Now it is writing the on the Disc, but does it mean that there is some problems with my burner? The firmware is latest. Please help. Thank you
  6. Thanks for your response blutach. the LiteOn burner is old but the ASUS burner is new. LiteOn is on IDE port whereas ASUS is on SATAII. If I remeber correctly the firmwares are also the latest. Though the LiteOn firmware official release was long back. What confuses me is with the same firmware, the first burn is good but not the others, and this is same for both the drives. :?: Regarding DMA, I have checked your sig (Thanks for the link), but I am bit confused. I have only one IDE porton my motherboard, so I can only add two IDE drives, but there are 4 IDE channels showing in my device manager- two primary two secondary! here are some screen shots, please see if you could help me out... Regarding Firmware, I am unable to find anything newer (checked your sig again). here are the firmware versions as shown by ImgBurn: ASUS DRW-2014L1T 1.02 (ATA) LITE-ON DVDRW SHM-165H6S HS0E (SCSI) See if you could help me out on this.
  7. Atleast I thought so, I may be wrong, and I would be happy to be I meant to say that I do not know any way of writing a data disc keeping session open so that files can be added later... Could someone please comment on the burn qualities? Can these be considered as satisfactory? And can i safely use these Mitsubishi discs?
  8. Hello Recently I got hold of few DVD-R media 16x-1x, which are labeled as Mitsubishi wit their registered logo. I have checked the Disc ID and found it to be same as that of Verbatim's. These discs were given to me by my vendor as Verbatim discs were not available with him at that moment. Anyway, I burnt few of these discs, and did a post-burn analysis. The quality seems to be >=98%. I have also got hold of some discs labeled as "Verbatim" and burnt those too. I found the quality to be same. Here are two screen shots of PIPO scanning. All these discs were burnt using 8x speed. As ImgBurn can not be used for Data burning, for all these discs I have used NERO 8. My question is: Are these two discs same? Because I never knew that Mitsubishi makes or markets blank DVDs in their own brand name! Discs branded as Mitsubishi Data type: Image file (ISO) of a video discs Burner: LITEON DVDRW SHM 165H6S Burner: ASUS DRW 2014L1T Data Type: ISO file created with ImgBurn. Burn speed 8x Discs branded as Verbatim Data type: Data DVD, AVI videos Burner: ASUS SATA DRW 2014L1T Burner: LITEON DVDRW SHM 165H6S Please clear my doubt, 'cause if both are same, then I shall continue buying Mitsubishi DVDs without much worries.
  9. Ok, here is a little update, The error displayed in the Log of ImgBurn is not because of Disc Quality, it was because of my ODD. The burner was faulty and I got it replaced from ASUS.
  10. The LITE ON is always plugged in my IDE port. I just bought the ASUS SATA Drive and plugged in the SATA port.
  11. Sorry can not check that... I do not have access to any other computer. What exactly do you mean by pressed DVDs?
  12. Thanks blutach Well the drive is new and it is connected to the Motherboard's SATA port. Rest I am not really sure of.
  13. But it seems that the drive is unable to read any discs,even those which are playing fine in my IDE LITE ON Burner!
  14. Hello Here are the details of my system: OS: Windows XP Pro SP3 Motherboard: ASUS P5B-VM HDDs: 3 in number, 1 IDE, 2 SATA II with JMicron SATA controller Optical Drives: IDE: LITE ON DVDRW SHM-165H6S SATA: ASUS DRW-2014L1T As I tried to Build+Burn with ImgBurn, I get an error. Please find the details in the log. Now I also find that my ASUS drive, though being recognized by Windows, neither can read or write anything. Its a brand new drive, not even a month old. Thefirmwire of this drive updated to the latest 1.02 version.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.