[can not burn dvd's in windows 8]

just to give an update. I did a registry clean and found 1 driver that there was an update for. After doing those 2 things I am able to burn dvd's now. thank you for all your help

[can not burn dvd's in windows 8]

^{hp BD E DH12E3LH EHDC (RAID)}

^{Current Profile: DVD+R}

^{Disc Information:}

^{Status: Empty}

^{State of Last Session: Empty}

^{Erasable: No}

^{Free Sectors: 2,295,104}

^{Free Space: 4,700,372,992 bytes}

^{Free Time: 510:03:29 (MM:SS:FF)}

^{Next Writable Address: 0}

^{MID: CMC MAG-M01-00}

^{Supported Write Speeds: 4x, 6x, 8x, 12x, 16x}

^{Physical Format Information (ADIP):}

^{Disc ID: CMC MAG-M01-00}

^{Book Type: DVD+R}

^{Part Version: 1}

^{Disc Size: 120mm}

^{Maximum Read Rate: Not Specified}

^{Number of Layers: 1}

^{Track Path: Parallel Track Path (PTP)}

^{Linear Density: 0.267 um/bit}

^{Track Density: 0.74 um/track}

^{First Physical Sector of Data Area: 196,608}

^{Last Physical Sector of Data Area: 2,491,711}

^{Last Physical Sector in Layer 0: 0}

^{Physical Format Information (Last Recorded):}

^{Disc ID: CMC MAG-M01-00}

^{Book Type: DVD+R}

^{Part Version: 1}

^{Disc Size: 120mm}

^{Maximum Read Rate: Not Specified}

^{Number of Layers: 1}

^{Track Path: Parallel Track Path (PTP)}

^{Linear Density: 0.267 um/bit}

^{Track Density: 0.74 um/track}

^{First Physical Sector of Data Area: 196,608}

^{Last Physical Sector of Data Area: 2,491,711}

^{Last Physical Sector in Layer 0: 0}

^{Performance (Write Speed):}

^{Descriptor 1...}

^{-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00}

^{-> EL: 2295103 (0x0023053F)}

^{-> RS: 5,540 KB/s (4x) - WS: 5,540 KB/s (4x)}

^{Descriptor 2...}

^{-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00}

^{-> EL: 2295103 (0x0023053F)}

^{-> RS: 8,310 KB/s (6x) - WS: 8,310 KB/s (6x)}

^{Descriptor 3...}

^{-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00}

^{-> EL: 2295103 (0x0023053F)}

^{-> RS: 16,620 KB/s (12x) - WS: 11,080 KB/s (8x)}

^{Descriptor 4...}

^{-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00}

^{-> EL: 2295103 (0x0023053F)}

^{-> RS: 16,620 KB/s (12x) - WS: 16,620 KB/s (12x)}

^{Descriptor 5...}

^{-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00}

^{-> EL: 2295103 (0x0023053F)}

^{-> RS: 22,160 KB/s (16x) - WS: 22,160 KB/s (16x) is this what you were asking for? Still learning how to use this program}

[can not burn dvd's in windows 8]

_{I 15:03:42 Family Tree:}

_{I 15:03:42 -> ACPI x64-based PC}

_{I 15:03:42 -> Microsoft ACPI-Compliant System}

_{I 15:03:42 -> PCI bus}

_{I 15:03:42 -> AMD AHCI Compatible RAID Controller (VEN_1002&DEV_4392 - ATI - amdsbs)}

_{I 15:03:42 -> CD-ROM Drive (hp BD E DH12E3LH SCSI CdRom Device) (Bus Number 0, Target Id 4, LUN 0) is this what you want to look at?}

[can not burn dvd's in windows 8]

so if not a software problem what would it be? tried different discs, tried different dvd burner, made sure drivers are all up to date, tried burning at slower speeds... did I miss anything?

[can not burn dvd's in windows 8]

update. I uninstalled Imgburn and installed Nero 12 and it burned cd and dvd ok so it looks like its a software problem working with windows 8 64 bit system.

[can not burn dvd's in windows 8]

I have tried different speeds and 2 different kinds of discs

[can not burn dvd's in windows 8]

Everything was working fine on windows 7. I upgraded to windows 8 and have not been able to burn a dvd. I was using anydvd along with clonedvd and it was like taking 3 hours to burn a dvd but when It was done the disc would be unreadable. I burned the same file with the same software on another computer and it worked fine. I tried different dvds. So I am thinking its a bad burner so I go out and buy a new one. The new one burns the dvd in like 8 minutes but disc still bad. I figured ok, software might not be working with windows 8. I install imgburn and it seems to write ok but disc still fails. I don't know what else to try. anyone have any ideas? I will try to attach the log file for my last attempt.

ImgBurn.log