Keremenke98

Do you think this game will work properly even with this error?

I've done what you said and It started burning 'till the end, I burnt a few discs and just now noticed that It still gave me an error, but it just ignored and continued. How will this affect the game, will it work? Here's Kprobe result

You sure that I should keep Online Hypertuning off? It was always on, what difference will it make?

They're the same discs I always use. I don't know, MKM-003-00 if it matters. So I should clear OPC history then do it?

I've been burning successfully for a long time now, and this suddenly started happening. I burnt Skate 3 and Mortal Kombat Komplete edition without a problem, Nba 2k15 and Fifa 15 before that, no problem. And then I tried to burn Destiny and something happened. Usually Online Hyper burning is enabled, and now, when I clicked Write a window popped up saying that IMG Burn advises me to disable Online Hyper burning because of something. Its crucial they said. So I did, and I got failed to read sector. And I believe that next time I had Online Hyper burning enabled and got the same error. Here's my log. ImgBurn.log

So i've written a few discs, they all worked, then the 4. came and it gave me this error. Same discs, everything just like the past discs, ran the game through abgx all green.

I'm about to burn a new game, it got out like yesterday, and I'm about to do it like I do for every game, works well. But now when I press Write this comes up "Experience tells me your drive isn't currently configured for optimal 'overburning' performance. Online HyperTuning should be Disabled. Would you like me to make the necessary changes for you? " What should I do and what does this mean?

When I install the new one, can I switch the Buffer size to 1024 Mib?

I've burned the first GTA V DVD and it worked well, no problems. Than when I started burning the second one, this happened I've attached the log ImgBurn.log

/

Can i use it on Non LiteOn drive?

Nothing?

I 20:43:52 ImgBurn Version 2.5.7.0 started! I 20:43:52 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:43:52 Total Physical Memory: 4,193,528 KB - Available: 2,433,268 KB I 20:43:52 Initialising ElbyCDIO... I 20:43:52 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.8.7 I 20:43:52 Searching for SCSI / ATAPI devices... I 20:43:52 -> Drive 1 - Info: ASUS DRW-24B5ST 1.00 (F:) (ATA) I 20:43:52 -> Drive 2 - Info: DTSOFT BDROM 1.05 (G:) (Virtual) I 20:43:52 Found 1 DVD±RW/RAM and 1 BD-ROM! I 20:45:10 Operation Started! I 20:45:10 Source File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd I 20:45:10 Source File Sectors: 4,267,015 (MODE1/2048) I 20:45:10 Source File Size: 8,738,846,720 bytes I 20:45:10 Source File Volume Identifier: DVD_ROM I 20:45:10 Source File Volume Set Identifier: d2ee4000MS UDFBridge I 20:45:10 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:45:10 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:45:10 Source File File System(s): ISO9660, UDF (1.50) I 20:45:10 Destination Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA) I 20:45:10 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 20:45:10 Destination Media Supported Write Speeds: 4x, 6x, 8x I 20:45:10 Destination Media Sectors: 4,267,040 I 20:45:10 Write Mode: DVD I 20:45:10 Write Type: DAO I 20:45:10 Write Speed: 4x I 20:45:10 DVD+R DL Reserve Track: No I 20:45:10 Link Size: Auto I 20:45:10 Lock Volume: Yes I 20:45:10 Test Mode: No I 20:45:10 OPC: No I 20:45:10 BURN-Proof: Enabled I 20:45:10 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 20:45:10 Optimal L0 Data Zone Capacity: 2,133,520 I 20:45:10 Optimal L0 Data Zone Method: Copied From Original Disc I 20:45:40 Set L0 Data Zone Capacity Succeeded! I 20:45:41 Filling Buffer... (512 MB) I 20:45:46 Writing LeadIn... I 20:45:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 20:45:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 20:45:47 Writing Layer 0... (LBA: 0 - 2133519) I 20:58:53 Writing Layer 1... (LBA: 2133520 - 4267014) I 21:12:16 Synchronising Cache... I 21:12:21 Closing Track... I 21:12:22 Finalising Disc... I 21:12:56 Exporting Graph Data... I 21:12:56 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_THURSDAY-MARCH-14-2013_8-45_PM_MKM-003-00_4x.ibg I 21:12:56 Export Successfully Completed! I 21:12:56 Operation Successfully Completed! - Duration: 00:27:46 I 21:12:56 Average Write Rate: 5,374 KB/s (3.9x) - Maximum Write Rate: 5,633 KB/s (4.1x) I 21:12:56 Cycling Tray before Verify... W 21:13:03 Waiting for device to become ready... I 21:13:15 Device Ready! I 21:13:15 Operation Started! I 21:13:15 Source Device: [3:0:0] ASUS DRW-24B5ST 1.00 (F:) (ATA) I 21:13:15 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) I 21:13:15 Source Media Supported Write Speeds: 4x, 6x, 8x I 21:13:15 Image File: C:\Users\Nemke98\Desktop\DMC\complex-dmc.dvd I 21:13:15 Image File Sectors: 4,267,015 (MODE1/2048) I 21:13:15 Image File Size: 8,738,846,720 bytes I 21:13:15 Image File Volume Identifier: DVD_ROM I 21:13:15 Image File Volume Set Identifier: d2ee4000MS UDFBridge I 21:13:15 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:13:15 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 21:13:15 Image File File System(s): ISO9660, UDF (1.50) I 21:13:15 Read Speed (Data/Audio): MAX / MAX I 21:13:17 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014) I 21:13:17 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014) I 21:13:17 Verifying Layer 0... (LBA: 0 - 2133519) I 21:19:38 Verifying Layer 1... (LBA: 2133520 - 4267014) I 21:25:57 Exporting Graph Data... I 21:25:57 Graph Data File: C:\Users\Nemke98\AppData\Roaming\ImgBurn\Graph Data Files\ASUS_DRW-24B5ST_1.00_THURSDAY-MARCH-14-2013_8-45_PM_MKM-003-00_4x.ibg I 21:25:57 Export Successfully Completed! I 21:25:57 Operation Successfully Completed! - Duration: 00:12:40 I 21:25:57 Average Verify Rate: 11,258 KB/s (8.1x) - Maximum Verify Rate: 16,400 KB/s (11.8x) I 21:38:16 Close Request Acknowledged I 21:38:16 Closing Down... I 21:38:16 Shutting down ElbyCDIO... I 21:38:16 ImgBurn closed! No Kprobe result.I dont know how to use it

I burned DmC with Imgburn, it was sucessful, it all passed well, Dmc trhou abgx all green, I used BurnerMax no probs. But when i play the game, I get Unreadable disc's all the time.Like i play, finish a mission, i get unreadable disc, so i continue the game, after another mission or not even a whole mission, few cutscenes, I get another.Its getting annoying.If i just burn another time, will this go away? Or do i need to do something else

I burnt the disc, it works now. Well it worked pass the 6th lvl, that was the problem before, but I got error few missions later saying the disc is dirty, unreadable.Maybe the disc rly is dirty and I havent tried to play passed that lvl again.But thanks a lot!

Alright, I'll try it tommorow.Thanks in advance

Dude, if this works, you're the greatest man alive...I will be so thankful. I'll try tommorow. If I ran the game trhou Abgx like 50 times, with different settings, and its all green, does it mean that game works 100% (that the error cant be game related) And after I did this, clean OPC and Hyper Tuning, when I exit Imgburn will it be remembered, or do I have to do it again everytime I run imgburn.

Alright I've done it.Im so scared to burn another disc.... Anything else in settings of imgburn or abgx or burnermax i should do or change?

Alright so I go to that, go LiteOn, chose force hyper tuning and click ok. I go again, go LiteOn , chose Clear OPC history, ok and im done?

I found it. I clicked Lite On , Force Hyper tuning. So thats it?

Im so confuseeeeed. I do Change Advanced settings in Eeprom utility? And how do I turn LiteOn tab ? Im sorry Im an idiot... I cleared the OPC history, in options it just says Clear OPC history

i dont knooow. I though that, with BurnerMax Payload I could use burners (supported by Payload) that arent Ihas to burn discs.Now I bought a supported burner and still get the same error.I dont know what to do anymore... How to perform Clear OPC history? I installed recently the EEPROM Utility and I did enable Force hyper tuning,

So after I crossflash my Asus burner, I should do this. btw, I tried crossflashing but failed when I tried writting with Flash Utility.It gave an error and i had to exit.Burner couldnt eject for few hours then it continued working.

I got Asus 24B5ST, its not crossflashed. Does that have to do something with it?