Hi all,
This is not quite an ImgBurn Support issue, but I thought it the most sensible place to ask.
As part of my work I am trying to recover the data from a DVD-R. I've had loads of success in the past simply using the 'Create Image File from Disc' option within ImgBurn.
This time however, I've noticed something I've never noticed before. In the summary of the disc it shows the following:
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 0
Last Physical Sector in Layer 0: 0
The last physical sector of the data area is 0 whereas the first is 196,608. Consequently when I try to image the disc, ImgBurn seems to think it's done once it hits sector 0.
So two questions:
How could I go about getting the data from the disc? What might have happened in order for this situation to have arisen?
Any information anybody could offer would be greatly appreciated! Thank you.
Full disc info follows:
TSSTcorp CDDVDW TS-L633B AC01 (SATA)
Current Profile: DVD-R
Disc Information:
Status: Incomplete
State of Last Session: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 892,096
Free Space: 1,827,012,608 bytes
Free Time: 198:16:46 (MM:SS:FF)
Next Writable Address: 1405792
MID: MCC 03RG20
Supported Read Speeds: 4x, 6x, 8x
Current Read Speed: 3.2x - 8x
Track Information:
Session 1...
-> Track 01 (LTSA: 0, LTS: 2297888, LRA: 1405775)
Pre-recorded Information:
Manufacturer ID: MCC 03RG20
Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120 mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 0
Last Physical Sector in Layer 0: 0
Log of attempted image follows:
I 09:01:20 ImgBurn Version 2.5.8.0 started!
I 09:01:20 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1)
I 09:01:20 Total Physical Memory: 3,930,480 KiB - Available: 2,854,140 KiB
I 09:01:21 Initialising SPTI...
I 09:01:21 Searching for SCSI / ATAPI devices...
I 09:01:23 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633B AC01 (E:) (SATA)
I 09:01:23 Found 1 DVD±RW/RAM!
I 09:06:28 Operation Started!
I 09:06:28 Source Device: [1:0:0] TSSTcorp CDDVDW TS-L633B AC01 (E:) (SATA)
I 09:06:28 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20)
I 09:06:28 Source Media Supported Read Speeds: 4x, 6x, 8x
I 09:06:28 Source Media Supported Write Speeds: 3x, 4x, 6x, 8x
I 09:06:28 Source Media Sectors: 2,297,888 (Track Path: PTP)
I 09:06:28 Source Media Size: 4,706,074,624 bytes
I 09:06:28 Source Media File System(s): None
I 09:06:28 Read Speed (Data/Audio): MAX / 8x
I 09:06:28 Destination File: C:\Users\Win7Pro\Documents\Image.iso
I 09:06:28 Destination Free Space: 51,763,077,120 Bytes (50,549,880.00 KiB) (49,365.12 MiB) (48.21 GiB)
I 09:06:28 Destination File System: NTFS
I 09:06:28 File Splitting: Auto
I 09:06:29 Read Speed - Effective: 3.2x - 8x
I 09:06:30 Reading Session 1 of 1... (1 Track, LBA: 0 - 2297887)
I 09:06:30 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 2297887)
W 09:06:31 Failed to Read Sectors 0 - 31 - Reason: Logical Block Address out of Range
W 09:06:31 Found end of Disc! - Sector: 0
I 09:06:32 Exporting Graph Data...
I 09:06:32 Graph Data File: C:\Users\Win7Pro\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633B_AC01_26-JUNE-2013_09-06_MCC_03RG20.ibg
I 09:06:32 Export Successfully Completed!
I 09:06:32 Operation Successfully Completed! - Duration: 00:00:02
I 09:06:32 Average Read Rate: N/A - Maximum Read Rate: N/A