snah

I'm half lucky to have another Blu-ray burner leant to me by a friend which is USB based and very old. I was reluctant to use it because of its age but I just figured i have to get this job done by tonight so its my last resort. I plugged it in and started burning my ISO and it seemed to go well until it gave this error: Here is my imgburn log: I 10:47:51 ImgBurn Version 2.5.8.0 started! I 10:47:51 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 10:47:51 Total Physical Memory: 33,476,900 KiB - Available: 30,294,216 KiB I 10:47:51 Initialising SPTI... I 10:47:51 Searching for SCSI / ATAPI devices... I 10:47:51 -> Drive 1 - Info: PIONEER BD-RW BDR-208D 1.10-ID61 (E:) (SATA) I 10:47:51 Found 1 BD-RE! I 10:48:01 Device: [2:0:0] PIONEER BD-RW BDR-208D 1.10 (E:) (SATA) I 10:48:01 Family Tree: I 10:48:01 -> ACPI x64-based PC I 10:48:01 -> Microsoft ACPI-Compliant System I 10:48:01 -> PCI bus I 10:48:01 -> Standard AHCI 1.0 Serial ATA Controller (VEN_8086&DEV_1D02 - Intel - msahci - v6.1.7601.18231) I 10:48:01 -> IDE Channel (ATA Channel 5) I 10:48:01 -> CD-ROM Drive (PIONEER BD-RW BDR-208D ATA Device) (Channel 5, Target 0, Lun 0) W 11:02:05 Device Arrival Detected! W 11:02:05 Device Arrival Detected! W 11:02:05 The device list will be refreshed at the next available opportunity. I 11:02:05 Searching for SCSI / ATAPI devices... I 11:02:06 -> Drive 1 - Info: PIONEER BD-RW BDR-208D 1.10-ID61 (E:) (SATA) I 11:02:06 -> Drive 2 - Info: MATSHITA BD-MLT SW-5583 1.00 (F:) (USB 2.0) I 11:02:06 Found 2 BD-REs! I 11:02:06 Searching for SCSI / ATAPI devices... I 11:02:06 -> Drive 1 - Info: PIONEER BD-RW BDR-208D 1.10-ID61 (E:) (SATA) I 11:02:06 -> Drive 2 - Info: MATSHITA BD-MLT SW-5583 1.00 (F:) (USB 2.0) I 11:02:06 Found 2 BD-REs! I 11:02:44 Device: [0:0:0] MATSHITA BD-MLT SW-5583 1.00 (F:) (USB) I 11:02:44 Family Tree: I 11:02:44 -> ACPI x64-based PC I 11:02:44 -> Microsoft ACPI-Compliant System I 11:02:44 -> PCI bus I 11:02:44 -> Intel(R) Xeon(R) Processor E5 Product Family/Core i7 IIO PCI Express Root Port 1b - 3C03 (VEN_8086&DEV_3C03 - Intel - pci) I 11:02:44 -> Renesas Electronics USB 3.0 Host Controller (PCI bus 2, device 0, function 0) (VEN_1033&DEV_0194 - Renesas (NEC) - nusb3xhc) I 11:02:44 -> Renesas Electronics USB 3.0 Root Hub (VID_1033&PID_0194 - Renesas (NEC) - nusb3hub) I 11:02:44 -> USB Mass Storage Device (Port_#0004.Hub_#0001) (VID_059F&PID_100E - Unknown - USBSTOR) I 11:02:44 -> CD-ROM Drive (MATSHITA BD-MLT SW-5583 USB Device) I 11:03:17 Operation Started! I 11:03:17 Source File: D:\London Femenist Film Festival\Session 6\Session6.iso I 11:03:17 Source File Sectors: 6,401,760 (MODE1/2048) I 11:03:17 Source File Size: 13,110,804,480 bytes I 11:03:17 Source File Volume Identifier: Untitled Project I 11:03:17 Source File Volume Set Identifier: 12345678 BDROM I 11:03:17 Source File Application Identifier: BD Authoring I 11:03:17 Source File Implementation Identifier: Developer I 11:03:17 Source File File System(s): UDF (2.50) I 11:03:17 Destination Device: [0:0:0] MATSHITA BD-MLT SW-5583 1.00 (F:) (USB) I 11:03:17 Destination Media Type: BD-R (Disc ID: PHILIP-R04-000) I 11:03:17 Destination Media Supported Write Speeds: 2x, 4x I 11:03:17 Destination Media Sectors: 12,219,392 I 11:03:17 Write Mode: BD I 11:03:17 Write Type: DAO I 11:03:17 Write Speed: MAX I 11:03:17 Hardware Defect Management Active: No I 11:03:17 BD-R Verify Not Required: Yes I 11:03:17 Link Size: Auto I 11:03:17 Lock Volume: Yes I 11:03:17 Test Mode: No I 11:03:17 OPC: No I 11:03:17 BURN-Proof: Enabled I 11:03:17 Write Speed Successfully Set! - Effective: 17,983 KB/s (4x) I 11:03:18 Filling Buffer... (80 MiB) I 11:03:18 Writing LeadIn... W 11:03:30 Failed to Write Sectors 3264 - 3295 - Reason: Program Memory Area Update Failure W 11:03:30 Retrying (1 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (2 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (3 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (4 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (5 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (6 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (7 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (8 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (9 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (10 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (11 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (12 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (13 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (14 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (15 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (16 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (17 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (18 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (19 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC W 11:03:31 Retrying (20 of 20)... W 11:03:31 Retry Failed - Reason: Unable to Recover TOC

Ok, After leaving the pc off for a bit and turning it on again it seemed to come alive and I went to recovery mode and the root cause of the error was drivers for the blu-ray. Admittedly this is my fault however, i am using the Pioneer BDR-208DBK drive which did not come with a drivers disk and has 0 support information on the Pioneer website and appears to be too new to have any kind of update available. So windows is handling it? I have already burnt 10+ Blu-rays with this drive and it is only now that it has started giving this error. I just tried to burn again and it hung on reserving track again. Here is my log pre-burn: I 10:47:51 ImgBurn Version 2.5.8.0 started! I 10:47:51 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 10:47:51 Total Physical Memory: 33,476,900 KiB - Available: 30,294,216 KiB I 10:47:51 Initialising SPTI... I 10:47:51 Searching for SCSI / ATAPI devices... I 10:47:51 -> Drive 1 - Info: PIONEER BD-RW BDR-208D 1.10-ID61 (E:) (SATA) I 10:47:51 Found 1 BD-RE! I 10:48:01 Device: [2:0:0] PIONEER BD-RW BDR-208D 1.10 (E:) (SATA) I 10:48:01 Family Tree: I 10:48:01 -> ACPI x64-based PC I 10:48:01 -> Microsoft ACPI-Compliant System I 10:48:01 -> PCI bus I 10:48:01 -> Standard AHCI 1.0 Serial ATA Controller (VEN_8086&DEV_1D02 - Intel - msahci - v6.1.7601.18231) I 10:48:01 -> IDE Channel (ATA Channel 5) I 10:48:01 -> CD-ROM Drive (PIONEER BD-RW BDR-208D ATA Device) (Channel 5, Target 0, Lun 0) Any idea what i should do?

Hi guys, Just been burning a lot of Blu-ray images which all worked flawlessly, then I come to burn this one and it doesn't get past "reserving track" or something (ive forgotten exactly what) so i try and stop the burn process but it wont stop. I leave it for 1 hour and still no sign of giving up, Imgburn doesnt want to close and the disk drive wont open so i restart my PC. It hangs in pre-boot with the "press f8 for bios information etc" screen and wont carry on into boot... So press the disk tray and the blu-ray comes out and then i reboot again. This time nothing happens at all, no boot screen, monitor says no signal input. So i try restarting a few more times and still it powers on but no signal goes to the monitor and no boot screen appears. Ive just unplugged my computer all together and left it. Any ideas what i should do? Im freaking out a little bit as you can probably tell. Thanks,