igorx1967

Thank LIGHTNING UK! To clean, I do not. I check the contents of the source hard disk and burn BD-R. Absolutely identical. Video plays smoothly and brakes. I am calm. Thanks again for your attention to my problem.

Hello I get errors when writing BD-R DL Drive Pioneer 207M latest firmware from the site recommended ImgBurn ImgBurn 2.5.8.0 version Check for BD-R DL Verbatim 50 Gb Japan with ebay Disks are here http://www.ebay.com/itm/300785928887?_trksid=p20578...RK%3AMEBIDX%3AIT From the report after writing the review stage ...... I 16:28:57 Read Speed (Data/Audio): MAX / MAX I 16:28:58 Read Speed - Effective: 3,3x - 8x I 16:28:58 Verifying Session 1 of 1... (1 Track, LBA: 0 - 15573919) I 16:28:58 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 15573919) I 16:28:58 Verifying Layer 0... (LBA: 0 - 12219391) I 16:45:27 Verifying Layer 1... (LBA: 12219392 - 15573919) W 17:12:00 Miscompare at LBA: 12220672, Offset: 0, File: \BDMV\STREAM\00004.m2ts W 17:12:00 Device: 0x00 (Empty Sector!) W 17:12:00 Image File: 0xFF W 17:12:00 Total Errors in Sector: 1 985 I 17:12:00 Verifying Sectors... W 17:15:13 Miscompare at LBA: 12220673, Offset: 0, File: \BDMV\STREAM\00004.m2ts W 17:15:13 Device: 0x00 (Empty Sector!) W 17:15:13 Image File: 0x37 W 17:15:14 Total Errors in Sector: 2 029 I 17:15:14 Verifying Sectors... W 17:15:14 Miscompare at LBA: 12220674, Offset: 0, File: \BDMV\STREAM\00004.m2ts W 17:15:14 Device: 0x00 (Empty Sector!) ..... ..... W 17:15:24 Miscompare at LBA: 12220862, Offset: 0, File: \BDMV\STREAM\00004.m2ts W 17:15:24 Device: 0x00 (Empty Sector!) W 17:15:24 Image File: 0x38 W 17:15:24 Total Errors in Sector: 2 046 I 17:15:24 Verifying Sectors... W 17:15:24 Miscompare at LBA: 12220863, Offset: 0, File: \BDMV\STREAM\00004.m2ts W 17:15:24 Device: 0x00 (Empty Sector!) W 17:15:24 Image File: 0xD8 W 17:15:24 Total Errors in Sector: 2 045 I 17:15:24 Verifying Sectors... I 17:18:50 Exporting Graph Data... I 17:18:50 Graph Data File: C:\Users\Администратор\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-207M_1.60_6-ИЮНЬ-2015-Г-_15-28_MEI-T02-001_2x.ibg I 17:18:50 Export Successfully Completed! I 17:18:50 Operation Successfully Completed! - Duration: 00:49:52 I 17:18:50 Average Verify Rate: 10 417 KiB/s (2.4x) - Maximum Verify Rate: 35 267 KiB/s (8.0x) I understand mistakes in the transition to the second layer This is normal? Or you need to change the drive? As far as critical ? P.S. I tried to write the same content on the company's drive TDK BD-RE DL 50 Gb - No errors were Chinese pigs also writes without errors ImgBurn.log