igorx1967
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by igorx1967
-
-
Hello
I get errors when writing BD-R DL
Drive Pioneer 207M latest firmware from the site recommended ImgBurn
ImgBurn 2.5.8.0 version
Check for BD-R DL Verbatim 50 Gb Japan with ebay
Disks are here
http://www.ebay.com/itm/300785928887?_trksid=p20578...RK%3AMEBIDX%3AIT
From the report after writing the review stage......
I 16:28:57 Read Speed (Data/Audio): MAX / MAX
I 16:28:58 Read Speed - Effective: 3,3x - 8x
I 16:28:58 Verifying Session 1 of 1... (1 Track, LBA: 0 - 15573919)
I 16:28:58 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 15573919)
I 16:28:58 Verifying Layer 0... (LBA: 0 - 12219391)
I 16:45:27 Verifying Layer 1... (LBA: 12219392 - 15573919)
W 17:12:00 Miscompare at LBA: 12220672, Offset: 0, File: \BDMV\STREAM\00004.m2ts
W 17:12:00 Device: 0x00 (Empty Sector!)
W 17:12:00 Image File: 0xFF
W 17:12:00 Total Errors in Sector: 1 985
I 17:12:00 Verifying Sectors...
W 17:15:13 Miscompare at LBA: 12220673, Offset: 0, File: \BDMV\STREAM\00004.m2ts
W 17:15:13 Device: 0x00 (Empty Sector!)
W 17:15:13 Image File: 0x37
W 17:15:14 Total Errors in Sector: 2 029
I 17:15:14 Verifying Sectors...
W 17:15:14 Miscompare at LBA: 12220674, Offset: 0, File: \BDMV\STREAM\00004.m2ts
W 17:15:14 Device: 0x00 (Empty Sector!)
.....
.....
W 17:15:24 Miscompare at LBA: 12220862, Offset: 0, File: \BDMV\STREAM\00004.m2ts
W 17:15:24 Device: 0x00 (Empty Sector!)
W 17:15:24 Image File: 0x38
W 17:15:24 Total Errors in Sector: 2 046
I 17:15:24 Verifying Sectors...
W 17:15:24 Miscompare at LBA: 12220863, Offset: 0, File: \BDMV\STREAM\00004.m2ts
W 17:15:24 Device: 0x00 (Empty Sector!)
W 17:15:24 Image File: 0xD8
W 17:15:24 Total Errors in Sector: 2 045
I 17:15:24 Verifying Sectors...
I 17:18:50 Exporting Graph Data...
I 17:18:50 Graph Data File: C:\Users\Администратор\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-207M_1.60_6-ИЮНЬ-2015-Г-_15-28_MEI-T02-001_2x.ibg
I 17:18:50 Export Successfully Completed!
I 17:18:50 Operation Successfully Completed! - Duration: 00:49:52
I 17:18:50 Average Verify Rate: 10 417 KiB/s (2.4x) - Maximum Verify Rate: 35 267 KiB/s (8.0x)I understand mistakes in the transition to the second layer
This is normal? Or you need to change the drive? As far as critical ?
P.S. I tried to write the same content on the company's drive TDK BD-RE DL 50 Gb - No errors were
Chinese pigs also writes without errors
Miscompare at LBA
in ImgBurn Support
Posted
Thank LIGHTNING UK!
To clean, I do not.
I check the contents of the source hard disk and burn BD-R.
Absolutely identical.
Video plays smoothly and brakes.
I am calm.
Thanks again for your attention to my problem.