tymoDX286

My current DVD-RW specs:

And probably wrong path in Share It should be D:\

Other known problem is Windows doesn't see Volume label at default level. ImgBurn too. Problem with label. Windows 10 can do that with special mode go to adm mode. Disk is already inside (inserted)

CONF: Windows 10. i3 Core 3.6 GHz, 16 GB RAM, SSD 240 GB, second SSD 240 GB I have the same problem with at least 3 programs with CD writing. I/O problem. Recently I have switched off >>PowerConfig on hiberfil.sys -h (About 6 GB, I have read that is possible). But that was mistake. Windows does not start after few days. I had to restore the hardware to the FIRST setup and the computer BOOTED. Then I have restore hiberfil.sys to ON. And almost all OK now. Still some problems with ACPI on second SSD 240 GB. Sometimes it logged out. Then must be restarted on HotPlug USB3.0. But all OK. DVD problem is under Windows 10 doesn't recording. Windows Explorator : WRITE files, directories, ISO >OFF BurnAWare : I have recorded 1x copy >>then WRITE >OFF ImgBurn : I have run 1x TEST mode > OK >then >OFF ImgBurn has given such errors: >>> PICS Windows 10 blocks every new programs which only knows after 1x WRITING. All attempts are logged and stored in temporary files. I have read about SPTI Microsoft. It is hard to re-install. It has work many times. I have recorded MANY-MANY DVD-Rs. https://github.com/Microsoft/Windows-driver-samples/blob/main/storage/tools/spti/src/spti.c https://learn.microsoft.com/en-us/samples/microsoft/windows-driver-samples/scsi-pass-through-interface-tool/