SGSeeker

I'm not sure what changed, but yesterday I scanned a burned disc at 2x and near the end PI problems spikes near the end of the disc and locked up the system. After a reboot, the system kept turning itself off after a few minutes inside windows (not overheating of power supply problem(voltmeter) though...weird. Memtest86 checks out fine also.). A 3rd or 4th reboot, the system started working correctly again and now I can burn at 16x without a problem? Not getting any hard drive corruption either, so I'm not sure whats up, but its working again. *shrugs* Doing a few more test burns to see if I can get it to fail again. I now have three TY Watershield coasters though...

Its seen about 25 dvd burns, no cd burns, and still works fine in Nero at 16x. Haven't had the best experience in Nero for a few years, scan quality included, so I'd like to skip it but if I can't get this software working again, it'll have to do.

I've tried switching to aspi with no luck. Uninstalling/reinstalling IDE controller driver, no luck. I just can't seem to get my Pioneer drive working again with ImgBurn after having the LiteOn 20a1h hooked up (Shuttle computer, only room for one drive at a time) for scanning. edit: 2x seems to work in ImgBurn, but nothing higher. These TY discs are best burned at 8x on my drive though...

I 15:07:38 ImgBurn Version 2.3.2.0 started! I 15:07:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 15:07:38 Total Physical Memory: 2,096,620 KB - Available: 1,592,284 KB I 15:07:38 Initialising SPTI... I 15:07:38 Searching for SCSI / ATAPI devices... I 15:07:39 Found 1 DVD

Was this something recent? I'm fairly certain that didn't used to be the case. I had some old media that only gave me 1x/2x in the drop down menu. Perhaps it was another small program I'm thinking of. Still doesn't explain my failing burn though (after the first coaster, tried a couple different things and another image in test mode. Same failures.).

Everything was fine with my TYG03 Media on a Pioneer 111L drive with 8.29 firmware. I've burned some sony dvd-rw's fine yesterday, so I'm not sure whats up. Between my last TY burn and the latest, I had my LiteOn drive plugged in to do some quality scans. After switching back, ImgBurn doesn't 100% switch to dvd-mode after I select an image (speed listings are still shown for cd-r's - 56x max, details box shows that the software knows thats its a dvd-r though with 4x, 8x, 12x, 16x write speeds) on either my TY or Ritek media. Here's the thing...Nero still works 100% without error and the discs play fine. I've tried uninstalling and reinstalling ImgBurn with no success. Ideas?