Jump to content


  • Posts

  • Joined

  • Last visited

BoSox2882's Achievements

ISF Member

ISF Member (2/5)

  1. Are they basically the same things as .mds files? Are there any benefits to using them?
  2. I use IMGBurn's read mode and think it is excellent. I just have a quick questions under the settings for read mode. Under 'image layout file' what do the CCD, DVD, and MDS boxes mean? I know IMGBurn defaults to MDS, which as I understand it just makes a dummy file to hold the layerbreak, so what do the DVD and CCD boxes do? I mainly use IMGBurn to read my dual layers dvds as it makes an exact copy of the original, including the original layer break. Thanks
  3. Pioneer's last two DVD drives (the Pio 112 and 115) have been very well received. I have used the 112d and it has been tremendous. The 115 has gotten even better reviews than the 112.
  4. I believe if you were to use read mode, and then delete the MDS file, and then try to burn the ISO, ImgBurn should ask you to choose the layerbreak. Assuming you used read mode the layerbreak prompt should only be the original. This would also allow you to use read mode and also use 'seamless' layer break option.
  5. I have seen this game before and know of someone who tried to make a backup of their own version of the game and they got this same problem. Plus, if you downloaded this game it wouldn't work anyway. There is a CD key required.
  6. Are you talking about the jacket_p folders? Also, does ImgBurn put in a dummy audio_ts folder on the output of a burnt dvd?
  7. Also, you could try a program called FAVC. It works very very well with AVi files, and it uses HCEncoder. I believe it does more than AVI, but I have only used for AVI files. It even has a very generic menu creator.
  8. As LUK said, definitely check out cdfreaks and the BenQ section. Ive never owned a BenQ 1640, but I have used the BenQ 1620 and it was just terrible on dual layer burns.
  9. I tried this, but could not get it to work. Is that the only problem the riplock? I will just continue to use my LiteOn for ripping/reading, because I am getting very good burns with the Pioneer the way it is.
  10. I am getting very slow reads with Pioneer DVR-112L. I uninstalled the IDE controller by following the guide and allowed windows to find everything again. Also everything is in DMA mode. Here is a log of my last attempted read. For comparisons my LiteOn is working fine when reading. I am using the Buffalo firmware 8.25 that I believe is just modified for bitsetting, as Nero shows my burns on +R media as dvd-rom. Is this a problem with RPC1 or needing the speed patch enabled? ; I 20:05:48 ImgBurn Version started! I 20:05:48 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 20:05:48 Total Physical Memory: 1,039,856 KB - Available: 619,916 KB I 20:05:48 Initialising SPTI... I 20:05:48 Searching for SCSI / ATAPI devices... I 20:05:48 Found 2 DVD±RW/RAMs! I 20:06:02 Operation Started! I 20:06:02 Source Device: [1:0:0] PIONEER DVD-RW DVR-112L 8.25 (E:) (ATA) I 20:06:02 Source Media Type: DVD-R (Disc ID: RITEKF1) I 20:06:02 Source Media Sectors: 2,283,616 (Track Path: PTP) I 20:06:02 Source Media Size: 4,676,845,568 bytes I 20:06:02 Source Media Volume Identifier: ASSASSINATION_O I 20:06:02 Source Media Volume Set Identifier: 384C808FC7B37F70 I 20:06:02 Source Media Implementation Identifier: Nero I 20:06:02 Source Media File System(s): ISO9660, UDF (1.02) I 20:06:02 Read Speed (Data/Audio): MAX / 8x I 20:06:03 Destination File: C:\Documents and Settings\AUSTIN\Desktop\ASSASSINATION_O.iso I 20:06:03 Destination Free Space: 65,050,161,152 bytes (63,525,548 KB) (62,036 MB) (60 GB) I 20:06:03 Destination File System: NTFS I 20:06:03 File Splitting: Auto I 20:06:04 Reading Session 1 of 1... (1 Track, LBA: 0 - 2283615) I 20:06:04 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 2283615) I 20:34:30 Image MD5: c77bcdd5c78e6f4bbc6d179e9b2c457f I 20:34:30 Operation Successfully Completed! - Duration: 00:28:28 I 20:34:31 Average Read Rate: 2,674 KB/s (1.9x) - Maximum Read Rate: 10,108 KB/s (7.3x) I 20:34:36 Close Request Acknowledged I 20:34:36 Closing Down... I 20:34:41 Shutting down SPTI... I 20:34:41 ImgBurn closed!
  11. Lemkes: It just depends on if your are writing to DVD5 or DVD9. If your writing a DVD5 at say 8X, it should take around 9 total minutes.
  12. Should I leave settings as is? Or is there a recommended setting for each? Speed is not a concern if it hurts quality at all.
  13. I am sorry this is probably a basic question but I do not what the new read mode means. It now gives 2 options for read mode speed setting. MAX and 8X? What is the 8X? And should I leave it at 8X? How does it effect read mode? Thanks LUK.
  14. As mmalves said: Just highlight each layer break and hit the preview button. See which break comes at the best time. As long as the break is at the beginning of a scene it shouldn't cause a viewing problem.
  15. EZ picker mode? Is there any changes to read mode in next version?
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.